Depending on the type and if bulbs are included or not, a Hyundai Elantra headlight replacement can cost anywhere from $50 to $1000. Enter the appropriate vehicle information into our search engine to ensure that you are obtaining the appropriate fit.
In This Article...
How much are the headlights on a Hyundai Sonata?
Estimated cost to replace a headlight bulb on a Hyundai Sonata. Hyundai Sonata headlight bulb replacements typically cost between $144 and $242. Between $26 and $33 is the expected cost of labor, while between $117 and $209 is the projected cost of parts.
Can you adjust your own headlights?
When you feel the silicone O-ring seat, push the new bulb in firmly without touching the glass. To secure it in place, turn the bulb (or retaining ring). The electrical harness must be reconnected.
It’s simple to change a headlight bulb. You can replace both of yours in approximately 30 minutes and save $30 in labor (always replace them as a set). The best part is that your owner’s handbook usually always contains a complete description of how to install headlights.
For clear access to the bulb in some modern automobiles, the entire headlight system must be removed from the car (Photo 1). Install the new bulb after removing the old one (Photos 2 and 3). Reinstall and secure the headlight assembly after that.
Is it challenging to replace a headlight?
Even if you have the most expensive wheels, if your headlights aren’t working, it won’t mean much (and as we know from numerous movies and cop shows, a burned-out light will lead to an unwelcome stop by a highway patrol car). Thankfully, changing a headlight bulb is a rather simple procedure.
Tools required:
- brand-new light bulb(s) Make sure you purchase the appropriate bulb type for your car (your local auto parts store should be able to match a bulb with your make and model)
- alcohol-based tissues and wipes (to clean and hold the new bulb)
- tool for Phillips screws
Instead of from the front of the automobile, you’ll access your headlight bulb via the engine compartment. Locate the headlight close to the front of the car by opening the hood. It will be housed in a bulb holder and connected to the bulb by a power connector, which typically has three wires.
Depending on your vehicle, the power cables are connected to a plug at the base of the headlamp and secured by a plastic catch, a metal clip, or a screw cap. Push down on the little lever at the top of the plastic catch as you take the plug out. Hold onto the metal clip as you draw it up and away if you’re dealing with one. When working with a screw cap, turn it counter-clockwise to unscrew it.
Holding onto the base of the old bulb, you should be able to remove the back of the headlight holder after the wires have been severed. In some circumstances, you might need to slightly spin the bulb to release it.
Use tissues or gloves to handle the replacement bulb; you don’t want your skin’s oils to get on it. Before you install it, you should give it a thorough cleaning with an alcohol wipe. When the bulb is prepared, insert it into the plug’s base. No rubber gasket will be seen if it has been placed properly. The headlight holder and power wires can be plugged back in when the bulb has been installed. Make sure to switch on your headlights to test the bulb.
Working with your headlights differs slightly from changing your rear tail lights, which include your brake lights. On some models, you may unscrew the housing that houses the bulb from the outside, while on other models, you have to do so from inside the trunk. To access the bulb after unscrewing the housing, you might need to work with tabs, screws, or tiny knobs on the tail light cover (make sure not to lose the screws if you need to remove them). The electrical wiring won’t need to be taken out, but be careful not to pull the housing out too much lest you rip the wires.
The bulb should be easy to remove by either pulling it out straight (as in most contemporary cars) or by pushing it in while simultaneously unscrewing. Replace the housing and reattach it when the replacement bulb has been installed (screws, tabs, knobs, etc.). Once more, be careful to test the bulb by turning the ignition on and using the brakes.
What does the Hyundai Sonata’s brake light signify?
The brake warning light is a major matter. When you see it turn on, ensure sure your emergency brake is not engaged, then halt your vehicle as soon as you can. Your brakes could not operate at all if you have insufficient brake fluid.
Will AutoZone replace the bulb in my headlights?
On the AutoZone website, I was able to find the replacement for my broken right headlight bulb. I was going to go there tomorrow to buy a new bulb, but I don’t think I can put it in myself, and I’m not sure if I should make an appointment with a mechanic. Does Autozone perform headlight bulb replacements for you?
In less than two minutes, find out if your auto insurance is being overcharged.
AutoZone can assist you in replacing a burned-out headlight bulb, but only if you bought the replacement bulb from their store and only if the procedure doesn’t involve disassembling the car.
While knowledgeable AutoZone staff members can assist you with a straightforward replacement, the store is not a substitute for a qualified mechanic. They won’t take apart or remove any of your car’s parts to service it.
Not all AutoZones will change your headlight for you, to add to that. You shouldn’t rely on your neighborhood AutoZone to assist you service your automobile because different locations may have different policies. Of course, you may always show up and inquire, but just to be on the safe side, you should probably schedule a repair appointment.
Jerry will automatically produce personalised quotations from more than 55+ top name-brand insurance carriers when you download the app and answer a few questions.
From the app, you can shop and compare prices, manage your policy, and even switch policies! Jerry handles everything, including getting in touch with your insurance, buying your new coverage, and dealing with the tedious paperwork.
A H7 headlight bulb: what is it?
Autos have traditionally employed dual-beam bulbs. By changing the reflecting pattern, a single housing with a single bulb may switch between a high and low beam. So to say, a two-in-one light bulb.
However, more recent vehicles use two distinct single-beam bulbs for each purpose. The car’s headlights are then equipped with two bulbs, one on each side of the car.
Each of these beams uses either an H1 or a H7 bulb, as you would have guessed. And this is where the H1 and H7 bulbs differ from one another.
The high-beam light is produced by the H1, while the low-beam light is produced by the H7.
Both the H1 and H7 are single-beam lamps that produce a fixed beam using a single filament.
This headlight is mostly used on open motorways and at night on country roads; it is not always used.
The H7 beam’s shorter range makes it suitable for lighting the road ahead of the car.
How similar are 1157 and 2357 bulbs?
The 2357 bulb has a shorter life expectancy than the 1157. The high filament of the 2357 bulb is substantially shorter than that of the 1157, with the 2357 rated at 400 hours compared to 1200 hours for the 1157. The low filaments have the same life expectancy value of 5000 hours.