The Hyundai Touch Up Paint Pen is a simple way to fix your Hyundai’s paint finish. The Hyundai Paint Pen is a dual-purpose applicator that has a color coat for deeper scratches on one side and a clear coat for small scratches on the other. Simply wipe the surface of your car, use a sanding stick for best results, clean it again, apply paint, and if necessary, add two or three coats. To seal, safeguard, and guarantee a factory-matched finish, use clear coat. includes a paint pen and sanding stick that have two uses.
- For all Hyundai models, the Genuine OEM Hyundai Touch Up Paint Pen will work. Your VIN must be plugged in to match colors.
- Each paintbrush is a special order item. typically ships in 2-4 business days, however rarely, depending on the color, it can take a little longer.
- Product Warning: Do not apply on vehicle trim (Plastic Parts of Vehicle).
- For further instructions on using the Hyundai Paint Pen, view this video.
- Reminder: Older vehicles may not perfectly match the paint marker provided because paint fades over time.
- No international shipments of this item are permitted. Once used, this item cannot be returned.
NOT AVAILABLE FOR SPECIAL EDITION VEHICLES ARE PAINT PENS. (DENIM VENUE/IRON MAN KONA)
My new phantom black Santa Cruz was dented or scratched when I flung a rock while mowing. This paint pen performed miracles. This product has my highest recommendation.
In This Article...
5
The only option for your Hyundai is Hyundai touch-up paint. It includes the clear coat to be used after using the colored paint and completely matches the color of the car.
4
a good product. easier to use than the majority of touch-up paints. It works wonderfully, and I’ve just used it once.
Before painting your Hyundai, use primer.
Apply primer to any unpainted areas of your Hyundai, such as exposed metal or plastic, before painting.
paint repair! The Hyundai paint you’re planning to fix should receive several light coats of primer. Apply just a
a little primer to your Hyundai sometimes. Before using, let the primer dry for at least a whole night.
Hyundai’s repair paint. After drying, use #220 grit sandpaper to lightly sand the primed Hyundai paint area.
yiranhu
Touch up pan is effective… The only need is that you be prepared to sand and polish. Realize that the touch-up pen is only a color coat, too. A color coat and clear coat are applied to modern cars using the 2K method. It won’t match if you simply apply the color. In any case, it won’t match, but there are ways to make it practically invisible.
If you want to carry this out on your own, you must:
1. Use soap, water, and wax remover to clean the area. If you’re just going to use soap, use dishwashing soap because car wash soap won’t get rid of wax.
2. To ensure that you are painting a smooth surface, you might need to add a little amount of glazing putty or another filler if the area is not smooth, such as if the damage caused an indentation in the plastic itself. If you do this, 400 grit sandpaper should be able to smooth it out.
3. Next, using the ink, lightly coat the affected region. Apply another layer after waiting for the paint to flash. Do two to three layers. Use 1000 grit sandpaper to WET sand the paint smooth if it is not smooth (just eyeball it as the spot is small). After any uneven coat, do this.
4. Over that, you should now add a dab of clear coat. Although I’m not sure where to get it, the in-touch bottle is available. Similarly, add several layers. Between coats, watch for the paint to flash. If necessary, sand in between coats. Additionally, once you’ve finished, the area should have more paint on it than the surroundings. After the final application, use 1000 grit or finer sandpaper to smooth the area once the paint is dry and sandable. If you sand a bit into the surrounding area, it won’t matter. That is typical. The sanding scars can be removed once the paint is smooth by lightly polishing it with rubbing compound. Terry fabric can be used to accomplish this by hand.
Although it’s a pain in the ****, if you take the time to do it well, the finished product after polishing will be indistinguishable from the rest. A clear coat is AMAZING for covering minor color inconsistencies.
Can you use a brush to touch up automotive paint?
BRUSH CONTACT To improve look, prevent more paint problems, and avoid corrosion, most people give their cars a brush-touch. A easy fix to avoid an expensive paint repair is brush touching. However, brush contact has some restrictions. It’s simple to find paint touch-up kits online and in car parts stores.
Workability of automotive paint touch-up pens
Stop right there if you’re looking for the touch-up paint pen for your car. They truly rank among the worst “solutions” for automotive paint dings and scratches. For a living, I repair rock chips and scratches, and I have devoted hundreds of hours to repairing the harm they create. Car dealerships are where I most frequently notice the paint blobs those pens left behind. In order to avoid being penalized by the dealership when they return a car after a lease is finished or when they try to sell it, people may sometimes try to hide up imperfections with paint pens. 95% of the time, touch-up paint pens make the damage appear worse. They are excessively difficult to use, and the outcomes are poor.
Touch-up paint pens are mostly sold by car dealerships and manufacturers as a secondary revenue stream. They don’t really care about how your car looks.
Dr. Colorchip makes the only paint touch-up kit I’ve ever seen that actually works good. I only ever use this paint system.
Does the touch-up paint require a clear coat?
The tone of the touch-up color is affected by the clear coat, albeit it is not necessarily necessary. When the clear coat is sprayed, touch-up paint kits are made to look as close as possible to the color of your automobile or truck.
The touch-up paint receives an additional layer of protection from the clear coat, extending its lifespan.
Touch-up paint is ultimately intended to conceal a scratch or rock chip so that it is less obvious, but it also aids in preventing rust from forming if bare metal is exposed. Rust can be avoided by using touch-up paint alone, which will also lessen how ugly the scratch or chip looks.
Does touch-up paint require primer?
If you have a particularly deep scrape, you will need to first apply primer and let it dry. Apply a coat of touch-up paint after the primer has dried, using brief, even strokes.
You often don’t need any additional brushes or equipment because touch-up paint is typically supplied in a small canister with a built-in brush.
Give the touch-up paint coat at least 30 to 60 minutes to dry. Repeat the procedure from there till you are satisfied with the outcomes.
How many layers of repair paint?
If your vehicle is anything like mine, the frontal surfaces occasionally resemble a painter’s pallet rather than the showroom-fresh appearance it had when you first drove your car, truck, crossover, or SUV home from the dealer’s lot.
If you carefully wash your car, you’ll probably find that many of those bright spots are really the remnants of numerous insects that may be removed with little elbow grease. However, you may also find that some of those imperfections were caused by stones, which not only pierced the clearcoat surface but also several layers of paint, creating a favorable entryway for rust.
It could be time for some touch-up work. Your problem might also be a deeper scratch, or simply a few minor scrapes.
Automotive Touchup, a branch of Microfinish LLC with headquarters in New Orleans, creates coatings for fixing and refinishing industrial and automotive equipment.
For the kinds of chips, scratches, and scrapes indicated above, Automotive Touchup provides a number of do-it-yourself products. You can choose from ready-to-spray cans, tiny vials with built-in brush applicators, ballpoint-sized touch-up pens, or even cans of materials with ready-to-spray materials.
Next, find out what supplies you’ll need by visiting the “Directions to teach you how to use our touch up paint” page. Videos that walk you through the procedures are available.
Basically, you prepare the surface by washing it with dish soap and water and then thoroughly drying it. Next, you remove any wax, grease, and other contaminants with a prep solvent. Sandpaper, which is also offered on the website, might be necessary.
According to Automotive Touchup, you should now apply touch-up primer over the bare metal or plastic, often in two to three coats spaced about 10 minutes apart. If the area you’re restoring is large enough, the instructions even provide information on masking off and paint blending. You might need to sand in between those layers.
After the primer has dried, you apply the basecoat color for touch-ups, again waiting about 10 minutes between layers. The touch-up color will next be applied, this time in several coats.
Apply the touch-up clearcoat in two or three coats, waiting 20 minutes between each one, after the paint has dried for 30 minutes.
The instructions state that the clearcoat “should be dry to the touch in 1-2 hours, but will totally dry overnight.” The instructions advise against waxing that area of your car for a month, but you can apply some rubbing compound to create a shiny surface once it has dried.
Automotive Touchup offers 12-ounce spray cans of basecoat color for $20 and 12-ounce cans of clear coat and primer for $8 apiece. A 2-ounce bottle of primer, clearcoat, or basecoat costs $8 and has an integrated brush. For primer and clearcoat, the pens cost $5.75, while the basecoat color costs $13. Sandpaper, rubbing compound, gloves, safety eyewear, and other items are also available on the website.
What is the lifespan of touch-up paint?
Although it’s rare, touch-up paint may last for ten years. Four to five years is a more reasonable life expectancy.
The likelihood that the touch-up paint will last until you’re ready to switch to another car increases with smaller the damage and better application.
The car still needs to be washed and waxed. Additionally, any additional dings or damage should be repaired.
Touch-up work could be more vulnerable to damage from overly attentiveness. You don’t want to give the assignment more effort. You desire greater finesse.
Rubbing compound: will it make touch-up paint smooth?
It’s not uncommon for small objects to hit your car or for other automobiles to cause minor collisions to scratch your paint work. When this occurs, it might be frightening and depressing regarding the appearance of your car.
It is extremely crucial for the paint job to be flawless if you intend to sell your car. Your car’s value will be lowered by any dents or flaws.
Our autos frequently get small dings and scuffs without any apparent cause. It might be disheartening to see your flawless paint job ruined, regardless of whether you’ve had your car for a while or just acquired one. You could believe that all it takes to fix the issue is a little touch-up paint. But even then, there can be rough edges or paint splatters hanging off. This is ugly and can make you give up.
Don’t worry; this article will show you how to remove touch-up paint without harming your car.
Use soap, water, and a sponge to clean your automobile, then wipe it dry with a microfiber towel to smooth out touch-up paint. Next, use rubbing alcohol to get rid of the extra paint. After that, apply rubbing compound and sand the area. In order to make the car look brand new, buff and wax it last.