How To Adjust Hyundai Tucson Headlights?

In order to adjust the headlights when the mark was hung on the wall, open the hood of your Hyundai Tucson. To change the height, find the neighboring optic screw and turn it from right to left. To effectively illuminate the road without dazzling, your Hyundai Tucson’s light beams should be just below the mark. Once everything is set up correctly, you may close the cover and do a test at night.

You can refer to the other pages on the Tucson if you ever wish to take the maintenance of your Hyundai Tucson a step further.


There will be one or two plastic nuts that you can turn on each headlamp assembly.

The headlights’ vertical aim will be adjusted if each has just one nut.

Two nuts on each will allow you to adjust the horizontal and vertical, respectively.

The Hyundai Tucson’s headlamp adjustment

Once your vehicle is in position, turn on your dipped beam and make a cross-shaped mark in the middle of the beam that will be projected on the wall. The cross should have one horizontal and one vertical portion. Check to see if both crosspieces are horizontal using a level. After that, back up to a distance of between 7 and 10 meters. Here are the actions to take for the remaining process:

  • Locate the screws for your Hyundai Tucson’s headlights’ horizontal and vertical adjustment by opening the bonnet (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • To conceal the projector on which you are not doing the repair, use a towel or other objects.
  • The most intense portion of the beam should be slightly to the right of the vertical line drawn on the wall using the screws to fix the horizontal alignment.
  • You will need to use the screw to try to position the upper end of the beam at, or just below, the horizontal marking on the wall for vertical adjustment.
  • Once you’re done, make sure your Hyundai Tucson’s headlamp settings are sensible. Don’t hesitate to double-check them after you’ve driven the vehicle because they frequently move.

. Please go through our articles on this topic if you want to know how to change the fog lights on your Hyundai Tucson.

Visit the Hyundai Tucson category to find more advice about the Hyundai Tucson.

How can I raise and lower my headlights?

To move the headlights inward or outward, turn the screws in either a clockwise or counterclockwise direction. Just to the right of the middle tapeline, the headlight beam should land. After making the necessary vertical and horizontal adjustments to the other headlamp, block out the modified headlight. Optimise the modifications

Do brand-new headlights need to be adjusted?

It’s crucial to adjust the headlights properly when installing new headlights. Each headlamp needs to be firmly placed and pointed in the right directions to ensure the “cut off line” of the beam pattern complies with all rules. When installing Driving Beams or High Beam Only Headlights, adhere to our detailed instructions on how to aim headlights correctly.

How can headlamp alignment be checked?

You must first determine whether the headlamp alignment is correct and whether it has to be adjusted. This can be done in a few simple steps.

Remove any extra weight first, such as objects in the boot, as these could cause your reading to be off. Additionally, make sure your tires are inflated to the pressure recommended by the manufacturer. Once parked, keep your vehicle around 60 cm from any walls or garage doors.

Now you can turn on the headlights, making sure they are not set to the beam or the fog light settings but rather the regular option. On the wall, the headlights will appear as a circle. Use two pieces of tape or a pencil to draw a plus symbol on the wall. Both lines should run horizontally from side to side and vertically from the top of the circular to the bottom. The center of your headlights is where the two lines converge in the middle.

Use a tape measure to make sure the plus signs’ centers are the same height. If they aren’t the same height, you might need to decrease one plus sign.

Reverse your automobile so that it is around eight meters from the wall once you are satisfied with your marks and they are both the same height. You don’t need to modify anything if the middle of your headlights still falls within your marks. You must readjust your headlights if they are dropping above, below, or to the side of the plus symbols.

Should headlights be aligned?

Need to change the beams? Here is our quick-and-dirty advice to making sure your headlights are pointed toward the road as opposed to into the eyes of approaching motorists.

It’s crucial to have good headlights to illuminate your path. When it comes to car ownership, many owners forget or outright disregard the fact that those bulbs are useless if they are not adequately pointed at the road.

The alignment of a car’s headlights can change over time or even with a simple bulb replacement. Reduced visibility, which is a major issue when driving at night, could result from this. If anything darts onto the road when you’re moving at 60 mph, you have just seconds to prevent a crash. Misaligned lighting can cause you to lose all reaction time.

Why is it crucial to check that the alignment of the vehicle headlights is accurate?

One of your car’s most crucial safety elements is the headlights. You must make sure that your headlights are correctly positioned for both your safety and the safety of other drivers on the road.

Headlights can blind oncoming vehicles if they are set too high, and they can be useless if they are set too low.

The Irish Independent published a report in 2003 saying that:

The failure rates “would climb from 54pc to 70/75pc with full implementation of the NCT from September 15 – principally on account of headlamp alignment results,” according to Transport Minister Seamus Brennan.

Why not visit your neighborhood ATLASBRANCH (Branch locator)? We would be pleased to provide a free inspection and quote with no strings attached.

How can you prevent being blinded by approaching headlights?

Look down toward the right side of the road to avoid the glare when confronted by an approaching high beam. Nevertheless, keep a partial focus on the road. You should be able to see the lines on the road by slightly lowering your line of sight, which will allow you to maintain your lane until the vehicle that is creating the glare passes.

How far up should you aim your headlights?

Your vehicle’s ride height can be subtly altered by suspension issues or a large cargo load, which may also cause one or both headlights to move. Your lights may become out of alignment as a result of a collision or running over a road obstruction.

Parking the car on a level surface and shining the headlights on a wall or garage door 25 feet in front of you can help determine whether the headlights are accurately aimed (some cars may require a different distance). For the majority of vehicles, the top of the low beam that shines on the wall should be at or just slightly below the height of the center of the headlight lens. You can anticipate that the light pattern will be lower on the driver’s side to avoid blinding other cars and higher on the passenger’s right side to highlight traffic signs. This should help you determine whether the beams on both sides are pointed in the right directions.

Another approach is to park the car five feet from the wall and then mark the wall’s vertical and horizontal light beam centers with masking tape. Reposition the car 25 feet back. The light beams should be around the same height both vertically and horizontally with the help of the tape line.

For adjusting headlight height, vehicles typically feature a screw or bolt on the headlight assembly. Some vehicles additionally include a screw for adjusting horizontal aim. A bubble level is also included in some cars to aid in modifications.

Without taking apart components like the battery, you might not have much room or even be able to reach the adjusters on some vehicles. Additionally, the vehicle must be perpendicular to the surface you’re shining the headlights on, be on properly level ground, and have no damage to the suspension system, flat tires, or baggage that would impact the ride height.

The owner’s manuals of many vehicles offer scant or no advice on headlight aiming. Ask a repair business to check if you’re unsure. A dealership may inspect the headlight aim and align it for free if the car is still under the basic warranty.

View the video below for a visual representation of everything mentioned above. Additionally, remember to regularly clean your headlights.

Which way should LED headlights be pointed?

What orientation should my LED bulb face is one of the most frequent queries we receive each day. In contrast to halogen, which emits light in all directions, LED light sources are “directional,” meaning they emit light in a single direction. In addition to the potential for glare on other drivers, the light will otherwise look to have a poor output or beam pattern. Because headlamps have varied optical designs, LED bulbs need to be positioned precisely.

Diodes (LED chips) for single filament bulbs should always be oriented side to side, with one set of LEDs facing at 3 o’clock and the other set facing at 9 o’clock. This will enable an even 360-degree light distribution within the housing, producing a consistent beam of light and filling the housing evenly.

We will employ the same side-to-side arrangement for dual headlamp configurations that produce both low and high beams from a single bulb. For dual beam bulbs, there are two sets of LED chips on either side of the bulb, and the two chip sets must be aligned as shown in the image below.

Important Information: Most of the time, each bulb is installed with the best operating angle, thus adjusting them is not always necessary. Before any harness is connected, check the LED lights’ alignment as soon as you have them installed. For information on how to modify the angle of the bulbs, please refer to the LED Bulb Adjustment Guide.

My headlights are different in brightness; why?

Your lights are pointed at different heights. One appears to be brighter as a result of this. Although the dealer can quickly align them for you, you can probably do it yourself. Your lightbulb is pointed higher than the other.