Estimated cost to replace the starter on a Hyundai Santa Fe. A Hyundai Santa Fe starter replacement typically costs between $412 and $501. Between $76 and $96 is the expected cost of labor, while between $336 and $405 is the estimated cost of parts.
In This Article...
What does a Hyundai starter cost?
Hyundai Sonata starter replacement typically costs between $397 and $517. Between $86 and $109 is the expected cost of labor, while between $311 and $409 is the estimated cost of parts. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
How long does a Hyundai Santa Fe starter last?
How Frequently Should Starters Be Replaced? The typical lifespan of a car starter motor is between 100,000 and 150,000 miles.
Are repairs for the Hyundai Santa Fe expensive?
In its first ten years of use, a Hyundai Santa Fe will require maintenance and repairs for roughly $8,056.
This is $1,077 over the industry average for popular SUV models. Additionally, there is a 23.97% likelihood that a Santa Fe will need a significant repair at that time. Compared to competing automobiles in its segment, this is 2.47% worse. The following graph shows how these expenses and the likelihood of repairs will rise over time.
Share
Are Hyundai Santa Fe vehicles dependable?
With a reliability rating of 4.0 out of 5, the Hyundai Santa Fe is ranked second among 26 midsize SUVs. It has lower ownership costs than the national average due to the $515 average annual repair cost. The Santa Fe is one of the more dependable automobiles on the road since its maintenance are less severe and more seldom than those for other vehicles.
How much should a starting replacement cost?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- either permanent magnets or electromagnetic field coils
- Switch fork
- Brushes
- Solenoid
- Commutator and armature
- gear for the starter
- bushes and bearings
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, such those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you firmly believe that your repair bill was overpriced, you can always contest it.
When I stop, why does my Hyundai Santa Fe shut off?
To increase fuel efficiency and lower exhaust gas emissions, the Idle Stop and Go (ISG) system automatically and momentarily shuts down the engine when the vehicle is stopped and idling.
When did the Santa Fe start having engine issues?
The most frequently reported problem with the Santa Fe, according to Car Problem Zoo, a website devoted to gathering owner feedback, is engine-related.
Though not to the same level, engine issues have been recorded for all model years, mainly between 2018 and 2010.
The following symptoms have been mentioned by owners:
- driving with a stalled engine
- A check engine light illuminates
- A lot of oil usage
- engine knocking noise
- complete failure of the engine
- Without any driver input, the vehicle accelerates on its own.
These issues were related to crankshaft manufacturing flaws that led to excessive engine bearing wear.
Additionally, there were issues with the engine’s connecting rod bearings, which are notorious for prematurely wearing out and making a banging noise.
Here is a description from one owner:
“As I continued down the exit ramp after my car lost power while I was still on the interstate, it stopped off and would not start again. There was absolutely no warning. There are no lights, smoke, noises, etc. 77,000 miles require the replacement of our engine. The dealership is placing the burden of the replacement expense on us. I’ve read accounts claiming that Hyundai engines frequently break down.”
How challenging is it to change a starter?
Are you concerned that the strange grinding sounds coming from your car may be the result of a worn-out starter? Your suspicions might be true after all. You must now replace your starter as soon as possible to avoid harming the engine flywheel. But you might be wondering how long it takes to replace a starter because of your busy schedule.
A starting motor replacement typically takes two to four hours. It accounts for the time needed to swap out the starter and remove the old one. Depending on the type and model of the car, the actual time will change. Access to the starter is more convenient in some cars than others.
But is replacing your starter your only option, or can you also try to fix it? Let’s first learn how a starter functions before we respond to that question in more detail later on in the essay.
Can you change a starter on your own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How long does a starting replacement take?
They just informed me that my starter needs to be replaced while I’m in the repair shop for some routine maintenance. How long does it take to replace a starter, please?
In less than two minutes, find out if your auto insurance is being overcharged.
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If that’s the case, a 4 hour time frame would likely be preferable to a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance while you’re waiting for the mechanic to complete. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest offer, they all produce competitive estimates from leading insurance companies. When a customer shops with Jerry, they often save over $800!
What happens to an automobile when the starter fails?
Your Car Is Unwilling to Start Your engine won’t turn over when you press the start button or turn the key. Every time you turn the key, you can hear a clanking or clicking sound—or nothing at all. If this occurs, the essential component of your starter system most likely has a problem.
What symptoms indicate a bad starter?
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- Seven: Battery
How can you identify if the problem is with your starter or battery?
Let’s start with diagnosing this problem since it is the cheapest and simplest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is most likely to blame if a jump starts the car, but it won’t start again after being turned off.
Can a starter malfunction while you’re driving?
Hello, and thank you for your letter. The vehicle may still move without the starter. It is no longer useful to the car after being used to start the engine. The alternator or battery is more likely to be at fault. You could want to test the alternator next if the battery was found to be in good condition. When it fails, the car would stall. Even if it happens occasionally, do not immediately conclude that a new or reconditioned part is defective. First, check the connections and the alternator. Then check to see if each fuse is in working order. You can look at the starter and battery after ruling out those more typical problems. Make an appointment with our service department to receive additional assistance.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Can a defective starter turn on the check engine light?
The check engine light cannot be brought on by a starter. When the automobile is running, when you would look for the check engine to be active, a starter doesn’t do anything.
When the cel turns on, it will set the code(s) and check to see whether any of them pertain to the current code. I’ve never heard of this, but hey, I make mistakes occasionally and am open to new ideas.
What noise does a blown starter make?
Loud clicking is the telltale sign of a faulty starter. A quick pace, such as click-click-click-click-click-click-click, or a slower lilt, such as click, click, click, can be heard. If you hear one of these noises when a part fails, you’ll probably need to get a new starter because no other component makes them.
Why won’t my car start even though the battery is not dead?
Damaged or Broken Ignition If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.