For both the front and rear wheels of the Hyundai Sonata, 34 PSI is the recommended tire pressure. Plug-in hybrid vehicles, on the other hand, require a 35 PSI level to account for the additional weight of the electric motor.
In This Article...
SERPRESULT
Most tire pressure levels typically range from 32 to 35 PSI, although the suggested range can be found in your vehicle’s owner manual or on the tire itself.
What are the tire size, pressure, and wheel size for the Hyundai Sonata?
Depending on the trim level you have, your 2019 Hyundai Sonata’s tire and wheel size will vary. The 205/65R16 tires and wheels on the Hybrid SE and SE models measure 16 inches in diameter and 6.5 inches wide. The wheels and tires for the Hybrid Limited, Limited, Plug in Hybrid, Plug in Hybrid Limited, SEL, and Sport variants are all 215/55R17, having a 17-inch diameter and a 7-inch width. The Limited 2.0T will be this car’s top-of-the-line trim. With the widest tires—235/45R18—and the largest wheels—18 inches in diameter and 7.5 inches wide—this model is unique. For all of these vehicles, the recommended tire pressure for each of the four wheels is between 33 and 35 psi.
The front and rear tires of the 2019 Hyundai Sonata should be inflated to 34 psi. The 205/65R16 front tire and the 205/65R16 rear tire sizes. The 2019 Hyundai Sonata comes with 16″ silver aluminum wheels as standard.
How much pressure should the tires on a 2016 Hyundai Sonata be?
Do you know what the ideal Hyundai Sonata tire pressure should be in order to enhance performance? For all four wheels, Hyundai advises a cold tire pressure level of 34 psi.
What tire pressure setting should a 2017 Hyundai Sonata have?
Because they can prevent your suspension and axles from having to work too hard to keep you going forward, the tires on your 2017 Sonata are essential to its longevity and general health on the road. You should aim for a cold tire pressure level of about 32 psi, or pounds per square inch, to maximize the performance of your Sonata.
On a 2017 Hyundai Sonata, how do you reset the tire pressure indicator?
Set the key to the “On” position in the ignition with the car off, but don’t push the starter. Once the TPMS light has flashed three times, let go of the tire pressure monitor reset button. Start the vehicle, then wait 20 minutes for the sensor to re-calibrate.
Why does my tire pressure light come on in Hyundai when my tires are fine?
A built-in tire pressure monitoring system (TPMS) is currently available on a number of automobiles. An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. This is why it’s advisable to maintain a tire pressure gauge in the car so you can double-check and verify it.
40 PSI tires: Is that too much air?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.
On a Hyundai Sonata, where is the reset button for tire pressure?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. When the tire pressure monitor system light blinks three times, hold down the reset button.
Are tires able to withstand 38 PSI?
Hello, Car Talk! Our 2015 Toyota Camry’s owner’s manual advises keeping the tires inflated to 35 psi on all four wheels. Every month when I check the pressure, I find that a few tires may have lost one to two psi. After several attempts, I eventually got exactly that one psi in there as I turn the compressor up. Sometimes while adding air, I’ll overshoot by a half or a full psi, which I then bleed off. Does that need to be done? What tire inflation range between over and under is considered acceptable? — Jay
Jay, you don’t have to do that. You can mess around and get near enough with tire inflation while still leading a full and happy life. Under-inflation of your tires poses the greater risk of the two methods to miss your target.
Underinflated tires run hotter because they have a wider rubber contact area on the road, which increases friction. The belts of the tire may also detach and disintegrate due to heat. The Tire Pressure Monitoring System (TPMS), which is a built-in gauge and a means of communication with the car’s computer, is now a standard feature in every car. Furthermore, a dashboard idiot light turns on whenever any tire pressure falls by around 10% below the acceptable level.
You should let the pressure drop to 31.5 psi before adding air if your Camry calls for 35 psi. On the higher end, your options are more varied. You can overinflate your tires by 10% or even more with little to no repercussions as long as you keep them below the maximum tire pressure indicated on the sidewall of the tire (which is different from the recommended pressure). For instance, if 35 psi is advised yet 44 psi is specified as the maximum safe pressure on your sidewall, you can put 38 or 40 psi in your tires without risk.
The maximum pressure is 44 psi. Although the ride will be tougher, there won’t be a blowout risk. You might even notice faster cornering and better fuel efficiency.
Therefore, the suggested tire pressure is the ideal balance between handling, comfort, fuel efficiency, and safety when it comes to filling your tires. But it’s perfectly acceptable to exceed the advised inflation by one or two psi. Additionally, going over is always preferable to going under.
Get the day’s top news, local, sports, business, entertainment, and opinion headlines from the Union-Tribune delivered to your inbox every morning throughout the workweek.
What does the Hyundai Sonata’s TPMS light mean?
Your Hyundai Sonata’s tire pressure monitoring light turning on indicates that one or more tires are either under- or over-inflated. To keep you safe while driving on the road and to prevent any damage to your tires, car tires must be filled to a specified PSI.
A Hyundai Sonata should have a PSI of 34. The tire pressure light on your car’s dashboard will turn on if the tire pressure monitoring system determines that the tire pressure is either too high or too low. The tire pressure sensor needs to be reset after your tires have been inflated to the recommended PSI.
If you don’t know how to reset the tire pressure sensor on a Hyundai Sonata, this page contains all the instructions you require. For detailed instructions on how to reset the TPMS on every Hyundai Sonata model from 2007 through 2020, keep reading.
Why do auto dealers blow up tires so much?
Tires are inflated to a higher pressure before shipping to assist prevent flat spots from developing in the tire as it rests for many days. The service staff is supposed to deflate the tires to the correct pressure as part of the delivery inspection procedure.
Should I have 32 PSI on my tires?
It will be helpful to start with the only parts of your car that should be touching the road: the tires, if you’re wondering why your gas mileage has seemed a little lower than usual lately, why your steering feels a little sluggish when you’re behind the wheel, or even why your car just seems to be sitting closer to the ground than usual. Inflation can be a problem for you.
For the best gas mileage and the longest tire life, it’s crucial to maintain the proper tire pressure. The recommended tire pressure for your automobile is printed right on the door of the vehicle and will provide the best handling, gas mileage, and tire life for that particular car. When filling them with air to the advised pressure, expressed in pounds per square inch, or psi, that is the one you should adhere to.
The appropriate tire pressure is typically listed on a label inside the driver’s door of newer vehicles. In most cases, the owner’s handbook contains the specifications if there isn’t a sticker on the door. When the tires are cold, the majority of passenger automobiles advise 32 psi to 35 pressure in the tires. The reason you should check tire pressure when the tires are cold is that as tires roll along the ground, heat is produced through contact with the ground, raising both tire temperature and air pressure. Make sure the car has been sitting overnight or at least for a few hours to get the most precise reading (not to mention the most reliable).
Never fill your tires up to the recommended pressure on the tire. The tire’s maximum allowable pressure, not the recommended pressure for the vehicle, is represented by that number. That was tricky.
Driving on underinflated tires can hasten tire wear due to increased friction, while driving on overinflated tires can offer you a bumpy ride and poorly handled automobile. In any case, not inflating your tires to the recommended pressure will have a detrimental impact on tire wear and vehicle performance as well as your maintenance plan for tire replacement.
Should my tires be overinflated?
It is not advised to exceed the appropriate tire pressure for a variety of reasons. Premature tire wear is inevitable. The core of the tread portion wears down substantially more quickly than the outer borders of the tire when it is overinflated. They might only last half as long as they normally would because of this.
How do you tell if the air in your tires is too inflated?
If your tires’ grip is significantly diminished, that is one of the first signs that they are overinflated. Since tires make contact with the road, it’s critical to check that they’re in good condition in order to provide your automobile with the grip it needs.
However, if your tires are overinflated, the central part bulges and the contact patch shrinks significantly compared to correctly inflated tires, which means that only a tiny portion of the tire will make contact with the ground, reducing total traction.
Loss of traction also reduces your cornering and braking distance, giving the impression that your automobile is sliding.
In reality, a Popular Mechanics investigation debunked the notion that over-inflated tires are more stable and excellent for increasing fuel efficiency. Their study revealed that when the tire pressure is too high, the vehicle’s control is actually hampered.
Therefore, it’s essential to check your PSI to ensure that your tires are correctly inflated if you find that your tread is becoming sloppy.