By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
In This Article...
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
using the key fob to start the car
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
Climate Control and Remote Start
A subscription to Bluelink Remote Package is necessary. Only automobiles with an automatic transmission or a dual clutch transmission that are equipped with push button start are eligible for remote vehicle starting. Not offered on all trims and models. Use Remote Start only if it is secure to do so.
With only a few taps on the app or a simple command to Alexa, you can remotely start your Hyundai’s engine, adjust the temperature inside, and turn on the defroster.
How can I start my Hyundai Sonata remotely with the key fob?
You are in for a treat if your Hyundai Sonata has a remote start. However, you must understand how to use it in order to make use of this functionality. The procedures are outlined below!
Follow these instructions to remotely start your Hyundai Sonata:
- Begin by using the Bluelink app or fob to lock the doors [even if the doors are already secured].
- Hold down the remote start button after that.
- Before the car starts, the headlights and turn signals will flash.
- After operating for 10 minutes, the Hyundai Sonata will shut off.
- Press the remote start button once more to stop the car.
No matter the weather, having a remote start is a useful feature. We’ll look more closely at how and when to use the remote start option in your Hyundai Sonata in this post. Continue reading for answers to more frequently asked questions about the Sonata’s remote start.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How can I tell whether the Hyundai I own has remote starting?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Accord, Civic, and Insight from Honda
- GM automobiles (2003 – later)
- Honda Accord
- ZDX and TLX Acura (2010 – later)
- Tribeca, Legacy, and Outback Subaru models (2007 – later)
- Navara Altima
- Fusion and the Ford Mustang
- Corvette Camaro
How can I start my Hyundai Elantra remotely using the key fob?
Press the lock button on your key fob while holding down the remote start button to activate the remote start function for your Hyundai Elantra. Alternatively, utilize the Blue Link Remote Package and your smartphone. When your parking lights flash, you’re all good to go! A
Sometimes getting into your car is about the last thing you want to do, whether it is 115 degrees and sunny or 15 degrees and snowy. Thankfully, technology has saved the day! You may start your Hyundai remotely in advance and start your commute without risking burning your hands or freezing your buns thanks to this feature. A
Has my Hyundai Elantra remote start been installed?
It does, indeed. Simply make sure your car is correctly connected to the BlueLink Connected Vehicle System and that the software has been downloaded and set up on your phone. With the help of this app, you can remotely turn on the heater and start your Elantra so that everything is ready to go when you step outside.
Without Bluelink, can I remotely start my Hyundai?
No, only Hyundai vehicles with push-button start key fobs and either an automatic transmission or a dual clutch transmission are eligible for the remote start option (DCT). Even said, not all models provide Remote Start. In addition, using Remote Start requires a Blue Link Remote Package membership.
How can I turn on remote starting?
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds. When the external lights flash twice, the car will start.
Any car can have remote starting added.
We want to make sure you are aware of all your alternatives when choosing a remote car starter system for your vehicle. The following information about factory key fobs and remote auto starters will help you choose a system that will meet your needs.
Add a car remote starter to the OEM key fob you already have.
Usually, you can add remote starters to your current manufacturer key fob (remote). However, the range from which you can start your car will only be as far as your factory remote’s range (usually around 100 feet). As a result, when you remote start your car, you won’t be able to unlock it with the factory remote since many cars, including those made by Honda and Toyota, block the keyless entry function of the remote fob while the engine is running. To unlock the vehicle, you will need to insert your key into the door.
How can I determine if my car has remote starting?
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
What is a remote start’s mechanism?
A vehicle’s specific radiofrequency is used to start it. Typically, it is encrypted to prevent hacking by would-be thieves. Once the engine begins, a vehicle’s remote start system locks the doors to prevent unauthorized entry. The device will turn off the engine if someone does get into the car and depresses the brake pedal to shift into gear.
Only when the owner enters with the key in hand can the car start. When that happens, they can shift into drive and leave.
When a remote start device is used, the engine typically shuts off after 10 to 15 minutes if the driver does not show up and start the vehicle. Additionally, most key fobs and smartphone apps contain a “kill switch” to turn the car off in case the driver changes their mind.
How can I tell if my car has remote starting from the factory without a key?
How can I tell if my secondhand automobile has a remote start built in from the factory? I’ve only had this car for a short while, and I still don’t know how to use it.
In less than two minutes, find out if your auto insurance is being overcharged.
a
Learning how to use a new car’s many special features might be challenging! There are a couple ways to find your car, though, if it has a remote start.
The key fob itself serves as the initial location. The key fob should feature the following buttons:
- Lock your car.
- Lock the vehicle
- Crack the trunk.
- start the vehicle
Look in the glove box for the user manual if you can’t find a start option. Used automobiles frequently include the original owner’s manual.
Another choice is to take note of the VIN from your auto insurance or window sticker and use it to look up various characteristics. Try using a website like Carfax, which provides a list of vehicle characteristics connected with the VIN.
In the worst case, call the dealership. The dealer will have information about the caras features and can give you instructions on how to use them.
Spend some time looking into your auto insurance to make sure you are still getting the greatest bargain when you are looking into your car. The Jerry app can be downloaded to help! Every six months, Jerry’s licensed agents automatically check your policy and, if they discover that you are overpaying, they send you a free estimate right to your phone.
Can I find out if I have remote start using my VIN number?
The only reliable approach to find out if the automobile has a factory remote start is to ask the dealership. They might be able to find your VIN number and inform you of this (depending upon what kind of car it is). The telltale sign of an aftermarket remote start would be tacky-looking wire splices under the dash.