- Enter your Hyundai and shut all of the doors.
- Turn your Hyundai’s ignition to the “ACC” (accessory) position using your key.
- Hold down the “open” or “unlock” button on the key fob until the headlights of your automobile begin to flash.
In This Article...
Step 3
When the car’s lights start to flash, press and hold the “Open” or “Unlock” button on the keyless entry FOB. Your Hyundai vehicle has now been reconfigured to the keyless entry FOB.
- Only Hyundai keyless entry FOBs that have already been programmed can be reprogrammed using these keyless entry FOB programming instructions.
- Toyota key
- Keyless entry FOB previously programmed for a Hyundai
- Not all Hyundai car models may be compatible with these setting recommendations. For assistance with programming a keyless entry FOB for a specific model, speak with your nearby Hyundai dealership or service center.
The remote control keyless entry transmitter operates the security system’s remote start, car finder, and panic buttons as well as arming and disarming.
How much does it cost to program a new Hyundai transponder key and remote?
As was already mentioned, you may save a lot of money by ordering your Hyundai key online and having the dealer or a car locksmith make it for you. You can order your key HERE if you need to.
Assuming you already have a blank key, programming a new Hyundai key essentially comprises two steps:
1. Cutting the key or remote to fit the ignition of your car.
The key must be trimmed to fit your automobile before it can be programmed. A dealership or vehicle locksmith can accomplish that by “pulling” the key code using your VIN from a database. They have to spend money on this, so they charge you for it. (In contrast to when you already have a cut key and only require a copy)
To start the vehicle, program the key or remote.
Simply put, the programming operation tells your car that the new key is “approved” to start the vehicle. This is accomplished by coupling a programming device to the computer in your car.
Although both the dealer and a car locksmith must do the same task, their costs vary:
The dealer’s key programming for Hyundai costs:
These are typical prices; actual costs will vary depending on the Hyundai vehicle’s year and type.
Additionally, it will cost an extra $70 for you to tow your vehicle to the dealer (estimate)
Cost of having a Hyundai key programmed by a car locksmith:
These are typical prices; however, actual rates will vary depending on your location, the time of day, the year and model of your Hyundai automobile, and other factors.
Similar to what we did with the dealer, we examined the prices during regular business hours. Here are the findings:
Furthermore, an automotive locksmith typically bills a service call or travel fee, which is typically around $50.
In conclusion, as you can see, the cost of replacing and programming your Hyundai key is not cheap, thus we strongly advise creating a backup key at the same time you replace your own because doing so will be considerably less expensive than creating a new key if you lose all of your other keys.
2 Gerard
Take a seat behind the wheel of your Hyundai. Behind you, shut all of the car’s doors. Step 2
Insert your Hyundai’s key into the ignition cylinder of the car. Set the ignition to the “ACC” or “Accessory” position by turning the key.
Since its founding in 1967, the Hyundai Motor Company in South Korea has been creating well-liked and fashionable automobiles. A keyless entry system is available on numerous Hyundai vehicle models for increased convenience. Hyundai keyless entry FOBs that were programmed by the dealer need to be reprogrammed after each battery change for the FOB or the vehicle.
I’ve never had to reprogramme after changing a battery, and if this does work, I assume it will only work for older automobiles with keyless access.
Is there an immobilizer on this Tucson? The key does not have keyless entry, but does it start the car?
How is a 2012 Hyundai Santa Fe key fob programmed?
For this car, there is no onboard programming process. To program the keyless remote for this car, additional equipment must be attached to the vehicle. Before going to the dealership, try a locksmith; their prices are typically 50% lower. Use the suggested locksmith locator on our website to find a preferred locksmith nearby:
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
How can I set up my automobile key to start it?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
Do I have remote start on my key fob?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. For instance, Ford key fobs have the same circular arrow emblem with “2x” inside the circle (other key fobs are labeled “X2,” which implies the same). This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, certain automakers, primarily BMW, have introduced redesigned key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pushing the “lock” button on the key fob, one can remotely start an engine in a new BMW by doing so. You don’t need to become daring and try out this sequence to test if the engine activates after pushing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.
What is the cost for programming a key fob at Hyundai?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.
Without the original, how do you program a keyless remote?
Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote.
Reversing step 6 by closing the door before entering the key may help if the above method doesn’t work because some Toyotas have a different approach.
How can I tell whether the Hyundai I own has remote starting?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Accord, Civic, and Insight from Honda
- GM automobiles (2003 – later)
- Honda Accord
- ZDX and TLX Acura (2010 – later)
- Tribeca, Legacy, and Outback Subaru models (2007 – later)
- Navara Altima
- Fusion and the Ford Mustang
- Corvette Camaro
Does programming remote starters necessary?
The truth is as follows. Installing a remote starter is regarded as severe electrical system surgery for your car. It is not a simple matter of setting up a new remote in your car and sending you on your way. Remote starter specialists must comprehend the intricate wiring systems found in contemporary vehicles, which requires a high level of ability. In today’s vehicles, one wire may be used to control a number of distinct operations. This process, known as multiplexed wiring, is used to reduce the weight of a vehicle. Less weight results from fewer wires.
What is the key fob programming fee at AutoZone?
Without an appointment and for a lot less money—typically $20 to $90—than a dealership, AutoZone creates and programs transponder keys. For a wide range of automobiles, including Toyota, Ford, Dodge, Honda, Mercedes, GMC, and others, they may create transponder keys.
Transponder keys, commonly referred to as chipped keys, are unique keys that contain an RFID chip. These chips have a distinctive code that is read by a receiver in the ignition of the vehicle. When the key is turned, the engine won’t start if the code matches the receiver’s code.
This increases security and guarantees that only programmed keys may start the car.
An estimated 70% of automobiles on the road today utilize a transponder key, and if you own a car produced in the 2000s, you most certainly have one as well. You can usually recognize these keys by their black plastic head.
Transponder key programming and cutting may be very expensive when done by a dealership, sometimes costing hundreds of dollars per key.
But when it comes to transponder keys, AutoZone really is a blessing in disguise because you can often order one for less than $100.