Registered
The homelink was included as standard equipment with my 2022 Kona N line ultimate. Since I have a carport rather than a garage, I am not in need of the homelink. Different standard of equipment in Canada, I suppose.
In This Article...
Owners of Hyundai, Begin Here
Trying to set up your Hyundai’s HomeLink? The steps you must take to quickly and easily train your HomeLink are explained in the video on the right side of the page. The most frequently required video will start playing immediately, however we have added manufacturer-specific movies below the main player for some garage door openers.
Not a fan of video? By selecting your vehicle’s model name from the list below, you may also get comprehensive instructions tailored to your particular model.
Choose your training films from the list below the main video for Hyundai owners who are using a Genie, Sommer, or an older model of HomeLink (model years 2008 and earlier).
How can you access the garage door on a Hyundai Kona without Homelink?
With Apple Carplay, you may unlock your garage door from your Hyundai Kona instead of using Homelink. Apple has approved your Hyundai Kona for use with Carplay.
CarPlay is a piece of software that connects your Apple iPhone to the in-dash entertainment and information system in your Hyundai Kona. By placing frequently used apps that would be required or especially useful while driving on the infotainment display of your car, CarPlay boosts convenience and decreases distraction. CarPlay reduces the need for you to actually handle your iPhone while driving by doing this.
Hyundai HomeLink: What is it?
HomeLink(r) is, to put it simply, an in-car garage door opener that enables you to do away with your remote control. Our HomeLink(r) setup guide can assist you in getting this feature set up in your new or used Hyundai so you can start utilizing it right away.
Hyundai HomeLink: How do I utilize it?
Double-click the HomeLink button you want to program. Exit your Hyundai and press the Learn/Smart button once on your garage door opener. Return to your Hyundai in 30 seconds and click the HomeLink button three times to program it. If programming was successful, the garage door will open or close.
Contains a navigation system the Hyundai Kona?
Toyota Corolla Ultimate It has almost every amenity that Hyundai offers, including a head-up display, navigation system, and 8.0-in touch screen.
How can my Hyundai HomeLink be reset?
It is advised that you erase any pre-programmed HomeLink buttons before returning a leased car or selling your car. Simply press and hold the outside HomeLink buttons for 10 seconds or until the solid HomeLink indicator light turns to blinking to accomplish this.
Which automobiles have HomeLink?
Numerous more technological components connect with advanced car technology. For added convenience, consumers who have smart home systems want to link their homes and vehicles. One system makes it simple for you to achieve that. Hundreds of automakers, including Audi, BMW, Chevrolet, Ford, Honda, Hyundai, Mercedes-Benz, and Toyota, include it as standard equipment in their vehicles. Additionally, it’s accessible as an aftermarket add-on.
It is known as HomeLink. Although the system has been in place for years, not everyone is aware of what it is or how to operate it. You may use it to access virtually any smart home feature simply pressing a button in your car.
Are Hyundai Kona vehicles dependable?
The Kona has received high marks from its owners in our Driver Power surveys despite being a relatively new model for its dependability, affordable operating costs, and variety of safety features. This is supported by the vehicle’s excellent outcomes in independent crash safety testing, which will also bolster consumer trust.
Has KONA has a navigation system?
The KONA has also received all the most recent connectivity upgrades, such as Bluelink(r) Connected Car Services, which enables voice or smartphone management of your vehicle. The 10.25″ wide screen navigation system comes with a complimentary five-year membership to Hyundai’s LIVE Services.
The Hyundai Kona 2022 does it have remote start?
You may lock and unlock your door and remotely start your car using the available Hyundai Digital Key and a compatible smartphone. Along with a wealth of safety features and driver-assistance technologies, the 2022 Hyundai Kona will also be available.
What does a Hyundai Kona come with as standard?
Hyundai Kona SE Standard amenities include two USB ports, wireless Android Auto and Apple CarPlay, cloth upholstery, a six-way manually adjusted driver’s seat, remote keyless entry, an 8-inch touch screen, and a six-speaker audio.
Which models come with HomeLink?
- 4Runner (2007 – 2023)
- Avalon (2007 – 2023)
- Camry (2007 – 2023)
- Corolla (2016 – 2023)
- Highlander (2007 – 2023)
- Range Rover (2007 – 2022)
- Mirai (2016 – 2022)
- Prius (2007 – 2023)
How can I acquire HomeLink?
for the Model 3 and Model Y to purchase Homelink. Prices are inclusive of installation fees. Homelink is also available at your neighborhood Service Center.
The mailing address you provide during checkout will get your Homelink components. Make a service appointment in the Tesla app after the parts are received to finish the installation.
No. Only a Tesla service technician may install Homelink. Your installation appointment can be set up in the Tesla app.
Follow these instructions to program Homelink in Model 3 and Model Y. Your Owners Manual also contains pairing instructions.
Only devices with rolling code remotes are required to complete the “Learn” procedure. You can skip this step if your device is an older model without a rolling code remote or if it is “Quick-Train” compliant.
- Examine the remote’s batteries.
- Hold the button down while placing the remote on the front bumper about 6 inches to the left of the Tesla symbol. It might take up to three minutes.
- Contact the HomeLink manufacturer to verify the remote’s compatibility.
- Make sure the LEARN button is down on the receiver. Most receivers come with an LED and two buttons. Refer to the owner manual that came with the HomeLink device for details on how to put the receiver into learning mode.
- Most devices spend three to five minutes in learning mode. As soon as you press the “Learn” button, adhere to the touchscreen’s directions.
- Place the front bumper of your automobile as close to the HomeLink device as you can.
- Make sure you haven’t used up all the learnt remotes or cars for the device receiver. Most receivers can learn as many as five remotes or vehicles. The programming procedure must be restarted if the receiver’s memory is full. Consult the owner documentation included with the HomeLink device for details on how to clear the receiver’s memory.
How can I tell if my home has HomeLink?
Try these troubleshooting suggestions first:
- Verify the portable transmitter of the device’s frequency (usually found on the back). Radio-frequency equipment that uses a frequency range of 288 to 433 MHz can be used with HomeLink.
- Replace the battery in the portable transmitter with a new one. An older battery will experience battery strength loss during programming, weakening the signal sent to HomeLink. A fresh battery will provide a robust signal.
- Retrain HomeLink while moving the handheld transmitter about in relation to the HomeLink button you’re trying to configure at various angles and distances. Try a different angle and a distance of 4-6 inches.
- During programming, cycle the handheld transmitter by pressing and releasing it every two seconds while holding down the HomeLink button until the indicator light shifts from a slow blink to a quick flash.
- Press and hold the HomeLink button while keeping an eye on the indicator light to make sure HomeLink has been programmed:
- It has received the signal and should run the device if the indicator light is steady.
- The indicator light will indicate that HomeLink has successfully received the rolling code signal if it rapidly blinks for two seconds before going solid. To finish the process, please adhere to the rolling code instructions provided in the section under “Programming a garage door opener.”
- The signal from the handheld remote has not been picked up by HomeLink if the indicator light continues to slowly blink. Select a different button to program or try programming the button once again.
What is the price of HomeLink?
The HomeLink automated garage opener will no longer be included as a standard feature in the Model 3 premium interior, Tesla has informed its sales personnel today.
All Tesla vehicles have long come with Homelink, a well-known wireless control technology that uses a vehicle to unlock garage doors automatically.
“HomeLink will no longer be available on Model 3 Premium interior vehicles in North America as of right now. All Model 3 vehicles will no longer include HomeLink as a result of this change. Customers of the Model 3 who want to upgrade to HomeLink can do so on our Tesla shop page. This upgrade needs to be installed by service after purchase.”
On its shop website, the manufacturer is currently selling HomeLink as an aftermarket item for $300:
On their website, Tesla describes the item as follows:
“Easy access to come and go. With the fully integrated Homelink module, you may connect Model 3 to your garage door, gate system, and other radio frequency (RF) controlled equipment.”
The $300 price tag, according to the company, includes both delivery and installation at Tesla Service Centers.
Without a remote, how can I link my garage to my HomeLink?
You can program any button to act as the in-car garage door transmitter. In conjunction with the transmit button, press and hold the chosen HomeLink button. Hold these two buttons down simultaneously until you notice the HomeLink LED begin to flash significantly more quickly.
How much does installing HomeLink cost?
Homelink is available in Tesla automobiles, but it costs a stunning $300 and requires a service appointment. You can preset settings to open and close the garage door automatically by connecting your automobile to the opener. Homelink additionally provides other special features. It’s glitchy, though, and if you own many Tesla vehicles, it can interfere with the presets. Whether you like it or not, your garage may wind up opening and closing irregularly.
Sullins questions why Tesla charges $300 for Homelink when there are better alternatives (and forces you to schedule a service appointment rather than letting you add it when you first order the car). The garage door opener in option #1 is most likely already present in your vehicle. When you press a button, the garage door opens. Voila! If you don’t already have one, you may get a replacement for approximately $12 or a universal push-button opener on Amazon for less than $30.
Ben has chosen to go with a smart garage door opener, which he believes Tesla should just provide for its vehicles instead of Homelink, even though both of the aforementioned choices operate considerably better for him than Homelink and are significantly less expensive. He must currently connect it to his smartphone, but if Tesla makes it compatible, he may be able to operate it from the vehicle.
Making Homelink available at the time of order is another option for people who feel comfortable using it. Sullins creates the code for the Model Y order page’s addition of the order option. It’s simple, he claims, and Tesla is welcome to the code for nothing.
To find out more about it and observe how it functions, watch the video. Then, tell us about your Homelink experience. Are you in Sullins’ camp?
Without a remote, how can I configure my Hyundai garage door opener?
Without a remote control, it is impossible to program a garage door opener. But the buttons on your car’s garage door opener can be reset using your remote transmitter. Alternatively, you can operate the door without a remote by using an electronic keypad.
- Press the program and arrow buttons at the same time on keypads. Before choosing your own, restore the brand’s default code.
- Press the two “end buttons” on control boxes to erase prior settings. Then sync your car’s buttons using the remote control.