Greetings, Oleksiy. A timing chain is used in that engine.
In This Article...
Symptoms of the Hyundai I10 timing chain
At 60k or 100k miles, most manufacturers advise timing belt replacement. For the chains, there is typically no service window at all. However, it can change. Many customers run into difficulties when they purchase a used car with 100,000 miles without realizing that the belt servicing is going to be necessary right away.
All the best with your I10. Please add a comment if you have anything to add in the space provided. We would be grateful for it.
RECALLS! Jan. 20, 2022 Jason, the fuel pump is not being monitored, there might be no engine light, etc. when the Mazda6 shuts off while driving. SEE…
There are two wires that change on the plug from 1995 to 1997, and I believe it has 15 pins.
I drive a base model 2007 H3 Hummer. repaired the transmission (Pro). My issue is that after it reaches about 35…
Is this the same John Watterson who previously owned a 1984 Volkswagen Rabbit and a 1989 Volkswagen Fox?
Anonymous
A timing belt is used in this engine.
Once the engine front cover has been removed, turn the engine to the marks as per the diagram.
By placing an old gearbox reverse light switch into the opening beneath the bell housing, you may lock the crankshaft in this position (manual transmission).
Before removing the belt, unlock the injector pump’s three bolts by drilling a hole through it with an 8.5 mm drill bit.
Replace the belt and draw the tensioner to 16 Nm.
When installing a complete pulley replacement kit, pay attention to the upgraded spacers’ location.
After you’ve adjusted the belt tension, don’t forget to double-check your timing markings and tighten the injector pump bolts once more.
Has a 2012 Hyundai has a timing chain or belt?
All Hyundai Elantra vehicles have a timing chain and an interference engine from 2011 to 2021. All Hyundai Elantra vehicles had an interference engine and a timing belt from 1992 to 2010.
For instance, the 2010 Hyundai Elantra 2.0L 4 Cyl. 138 hp (Beta II) option has a timing belt, whereas the 2021 Hyundai Elantra 1.6L 4 Cyl. 201 hp (Smartstream G1.6 T-GDI) option has a timing chain.
Do Hyundai vehicles use timing belts or chains?
Hyundai’s 2.7L V6 engines have a single timing belt, but its 3.3L, double-overhead camshaft engine has a timing chain for each camshaft plus a drive chain for the oil pump. At first glance, a timing chain design enables engineers to reduce spinning friction and shorten the length of the engine as a whole.
Photo 1: Hyundai plans timing belt replacements for its 2009 2.7L DOHC V6 Tucson engines at intervals of 58,000 miles or 72 months.
Whether you like it or not, contemporary technology controls how the independent import repair business operates today. As an illustration, the first “rubber” timing belt I ever saw was on a six-cylinder, single overhead camshaft engine made in the United States in 1968. We laughed a lot at the idea that these gear-toothed “rubber” timing belts would outlast the flimsy supplemental V-belts of the time given our experience.
But to our amazement, timing chains in our service bays were quickly replaced by rubber timing belts. Furthermore, since timing belt changes were frequently planned at intervals of 40,000 to 60,000 miles, rubber timing belts turned out to be a significant profit center. Later, to comply with some state-mandated emissions maintenance intervals, replacement intervals were increased to far over 100,000 miles.
Our two focal vehicles, a 2009 Hyundai Tucson with a 2.7L V6 and a 2007 Hyundai Sonata with a 3.3L V6 give good illustrations of how this shifting trend in engine design may effect how you might be conducting business.
Photo 2: The 3.3L DOHC Hyundai engine used in the 2007 Sonata features one chain for the oil pump and two chains to drive the camshafts. None have set intervals for replacement.
Is there a timing belt or chain on a 2010 Hyundai Accent?
Due to typical wear and tear, Hyundai advises changing the timing belt in the 2010 Hyundai Accent every 75,000 miles.
Has the I30 has a timing belt?
Response from CarsGuide The timing belt on the Hyundai i30 from this era is made of rubber and has teeth. This system runs quietly and cleanly, but it needs to be replaced every 90,000 kilometers.
What is the price of a timing chain for Hyundai?
Best in Automotive Repair Hyundai Elantra timing chain tensioner replacements typically cost between $871 and $1,023. While materials are priced at $289, labor costs are predicted to range from $582 to $734. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
Are new Hyundai timing chains required?
When should a timing chain be changed? Unless there is a specific issue, the timing chain typically needs to be replaced between 80,000 and 120,000 miles. In higher mileage automobiles, chain problems are typical.
The Hyundai i10 from 2014 does it have a cambelt?
Lowest of lows. Although some variants of the 1.1-liter Hyundai i10 are PS110, the other engines still manage 54-61 mpg and only cost PS20 or PS30 a year to tax. The 1.0-litre Hyundai i10 Blue is the real star here thanks to its 67 mpg fuel economy and freedom from road taxes. Another reason to stay away from the automatic transmission available with the 1.1 and 1.2-litre engines is that it reduces their fuel efficiency by up to 19 mpg and increases their annual tax liability by PS110-PS130.
Few cars are less expensive to maintain than the i10, in addition to having wallet-friendly fuel and tax habits. It requires maintenance every year or 12,500 miles, for which Hyundai charges PS130 for a minor inspection and PS200 for a major for vehicles older than five years; for newer models, add PS60 to those prices.
Hyundai should sell you brake pads for roughly PS60, while discs cost around PS120. Windshield wiper replacement rubber costs PS30, whereas brake fluid and air conditioning regas should only cost you about PS60. Independent auto repair shops might be able to reduce these prices by as much as 50%. Every seven years or 72,000 miles, the 1.1-liter engine requires a new cambelt; you should allocate PS250–300 for this work. The other engines are chain-driven, therefore there is no need to change the cambelt.
When should a Hyundai timing belt be changed?
It should be replaced every 60,000 to 100,000 miles, but depending on your car and the belt’s maker, you could need to do it more frequently.
How much does a Hyundai timing belt replacement cost?
Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor)
How much does a Hyundai timing chain replacement cost?
A timing chain replacement typically costs between $1,000 and $2,500. (parts and labor included.) The precise sum depends on the make and model of your car as well as your particular region.
Although some timing chain kits can cost up to $500, the timing chain itself is only $100 to $250. A good timing chain kit will contain all the gears, tensioners, and occasionally even the water pump.
Costs of labor might range from $400 to $1500. It takes a lot of time and effort to replace the timing chain because it requires disassembling many engine components.
Additionally, if the timing is set incorrectly, the engine could sustain serious damage and require rebuilding or replacement. This explains the high labor cost and highlights the necessity of hiring a qualified mechanic to complete the work.
The Hyundai i10’s age is how old?
Since 2007, the South Korean company Hyundai has been manufacturing the Hyundai i10, a city automobile. In the model lineup, it took the position of the Hyundai Atos, and at first, it was only offered as a five-door hatchback body style. The third-generation i10 was revealed on August 7 in India and made available there on August 20 in 10 variations with both manual and automatic gearboxes, diesel and gasoline engines. The Hyundai Aura is a sedan variant as well.
How far can a Hyundai i10 travel?
We averaged mpg in the low- to mid-40s during our time driving a variety of vehicles. This didn’t much change from the 1.0-liter to the 1.2-liter and was primarily based in a low-speed town environment. On a motorway journey, we anticipate this to easily increase to the upper 40s.
A full range on a tank of gasoline with a tiny 36-liter fuel tank would be about 350 miles.
Other i10 operating expenses ought to be manageable. Due to the minimal insurance groups and inexpensive rates, servicing and maintenance expenses will also be relatively affordable.
What is the Hyundai i10’s maximum mileage?
The low-fuel warning light comes on in Grand i10 when there is roughly 5-6 liters of petrol remaining in the fuel tank. According to customer reports, the Grand i10’s gasoline version has an average mileage of 16 km per gallon, allowing you to travel 80 to 90 km when the low fuel warning light illuminates. However, it is advised to not totally rely on these figures and to refill the fuel tank as soon as possible following a low alert indicator.
You were so kind to say that! Your response to the query will help hundreds of people decide whether to buy! After moderation, it will show up on the website.
What are some Hyundai i10 common issues?
- Clutch problems. problems with the clutch pads.
- Headlamp adjustment problems Grand i10 Hyundai
- difficulties shifting into reverse. Gear Knob | Only for illustrative purposes.
- problems with the brakes.
- flawed AC.
- Steering motor problems.
- Noise in suspension.
- corroded exhaust
Is the Hyundai i10 a dependable vehicle?
Reliability Survey, the second-generation i10 is quite dependable. Out of 17 entries, it placed second in the value and compact car category. Hyundai consistently ranks in the top third of any manufacturer dependability table, and in our most recent poll, it placed third out of 30 automakers.
How much does it typically cost to replace a timing chain?
I read that when a car is fairly old, the timing chain needs to be replaced. I haven’t done it before, and I believe the moment is now. How much does it cost to replace a timing chain?
In less than two minutes, find out if your auto insurance is being overcharged.
Being preventative is admirable because a broken timing chain can seriously harm an engine.
Timing chain replacement might cost between $600 and $800 to do it yourself or $1,600 to $1,800 to have a technician do it. Due to how difficult it is to replace this element, the price is exorbitant.
The parts for a DIY timing chain replacement will run you about $650. But this is a job that’s best left to mechanics with a lot of experience.
Fortunately, timing chains are built to endure the lifespan of the car, unlike rubber timing belts, thus it is rare that you will need to have it changed. Watch out for these signs if you think your timing chain may be broken:
- Noisy timing chain
- Starting the car is challenging.
- While idling, the engine shakes or vibrates
- Engine has poor performance or is misfiring
- The check engine light is on.
Bring your car to a repair as soon as you can if any of these symptoms persist. Quickly addressing the problem will stop further harm to your car.
By cutting costs on other auto expenses, like car insurance with Jerry, you may make place in your budget for unforeseen auto repairs. In just a few seconds, the Jerry app can quickly scan rates from more than 50 of the best insurance providers, including Travelers, Nationwide, and Progressive! Once you’ve decided, they even assist you in canceling your old coverage.
With Jerry’s assistance, you may uncover $887 in annual savings on auto insurance and save time!