The classic human goals of maintaining comfort and avoiding pain can be greatly improved by starting your car a few minutes before getting in. After all, for reasons we can’t fully understand, the sensation of being completely submerged in a hot automobile during the summer or a cold car during the winter is a particularly unpleasant one. Ever clever, humanity created a function called “remote engine start” to combat this problem.
However, remote starting is not a feature that all contemporary cars have. Has the 2020 Hyundai Elantra remote start? Does it offer it?
In This Article...
Plug & Play remote start for the Hyundai Elantra from 2017 to 2020
The ONLY completely plug-and-play remote start solution for the Hyundai Elantra from 2017 to 2020. Most consumers can complete the installation process in under an hour. To start your Hyundai Elantra after installation, simply press the lock button on your original remote control three times. If the factory remote’s range is insufficient, you can also purchase one of our choices with a longer range when you check out. This kit now contains TAKEOVER, so when you open the door, the car won’t turn off and you may hop in and drive!
- Complete Kit includes ALL required parts.
- includes instructions for installation.
- Easy, straightforward, PLUG & PLAY installation
- Easy to install, requires no cutting or splicing
- These kits, sold in the thousands, are excellent!
- Hyundai Elantra, model years 2017–2020
- Your VIN #’s tenth letter must be an H, J, K, or L.
- Push-start ignition is required.
- Unable to work with key start
- Power locks and keyless entry are required for the vehicle.
- only an automatic transmission.
Plug and play installation was completed on the passenger side beneath the dash and glove box, and one t-harness was installed at the headlight switch on the driver’s side. Installation that is 100% Plug & Play ABSOLUTELY NO cables must be cut, spliced, etc.
Pressing the lock button 3 times on your current OEM remote will START the vehicle.
Your present OEM remote’s lock button must be pressed three times in order to STOP the vehicle.
If you don’t get out and get in, the vehicle will run for 15 minutes before shutting down.
Simply get inside and depress the brake to take control of the vehicle after remote starting. After that, you can start driving without having to shut down or restart the car.
- Simply press LOCK three times on your factory remote to activate the remote starting. 3x Lock From OEM Fob Only = No Additional Remotes to Carry.
- 1-Way 1500ft = Includes two 1-button remote controls with a range of up to 1500 feet, plus a third lock from the OEM fob that also functions.
- 2 Way 3000 Foot = Includes 1 1-Button 1-Button and a 2-Way Remote The OEM fob’s 3x lock and a 1-way remote with a range of up to 3000 feet will also function.
- Start your automobile from anywhere in the globe with an app on your phone. Service Plan is necessary upon purchase or installation. Free for the first year, then $39.95 per year. (3x Lock will also function)
- Full House = You get everything! Use the 2-way 3000ft remote control, your smartphone, or your OEM key to start your vehicle from anywhere in the globe. Press lock three times. After purchase or installation, a service plan is required for the smart phone module. Free for the first year, then $39.95 per year.
How does a Hyundai use remote start?
By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
How to use a phone to start your Hyundai
You can start your Hyundai immediately from your phone if it has the Bluelink technology, which allows your car to communicate with a smartphone. In fact, you can adjust the temperature to your preference and turn on appliances like the defroster.
Hyundai cars with Bluelink are given three years of free service. You may also control your doors’ locking and unlocking, on-demand alarms, diagnostics, and even a remote car-finding tool for those busy shopping or post-concert days.
Can the 2020 Hyundai be started remotely?
It does, indeed. Simply make sure your car is correctly connected to the BlueLink Connected Vehicle System and that the software has been downloaded and set up on your phone. With the help of this app, you can remotely turn on the heater and start your Elantra so that everything is ready to go when you step outside.
Can Hyundai Elantras be started remotely?
The Elantra from 2021 does it have remote start? No and yes. In contrast to its larger sibling, the Sonata, the 2021 Hyundai Elantra lacks remote start on any of the three trim levels of the key fob. Instead, using their Blue Link app, Hyundai provides remote start, climate control, and much more.
How can I tell whether the remote start on my Hyundai is working?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Accord, Civic, and Insight from Honda
- GM automobiles (2003 – later)
- Honda Accord
- ZDX and TLX Acura (2010 – later)
- Tribeca, Legacy, and Outback Subaru models (2007 – later)
- Navara Altima
- Fusion and the Ford Mustang
- Corvette Camaro
How can I start my Hyundai Elantra remotely using the key fob?
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
Does a Hyundai key fob have remote start capability?
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
How can you tell whether your vehicle has a remote starter?
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
Can a car have remote start added to it?
We may receive affiliate commissions if you use our website’s store links to make purchases. All fees are used to fund our nonprofit purpose in full. Study more.
With the help of the handy remote start option, you can start your car’s engine from a distance to cool the inside on a sweltering summer day or warm it up on a bitterly chilly winter morning.
It’s usually never too late to install a remote starter, so don’t worry if your car didn’t arrive with one.
The manufacturer of your vehicle is your best bet, advises John Ibbotson, principal technician of CR’s Auto Test Center.
The automaker’s dealer-installed remote-start technology can possibly be installed in vehicles made after the mid-2000s. You ought to be able to add a remote starting if one was offered for the model, trim, and transmission of your automobile when it was new, according to Ibbotson. Your car’s ability to use remote starting can be determined by your dealer.
Vehicles manufactured prior to 2005 will likely require an aftermarket starter. If you choose to use an aftermarket product, Ibbotson advises, “have it professionally installed at a national chain like Best Buy or at a respectable local shop to help ensure this complex operation is done well. You’ll also obtain some degree of protection against failures.”
Stay away from inexpensive remote-starter systems that you can get online, and don’t even try to install one yourself, he advises.
How does the Hyundai command start function?
By pressing the button twice in quick succession on your remote control transmitter, you can use the remote start feature.
What model Hyundai has push-button ignition?
Select Hyundai Venue models, including the SX 1.2 Petrol, SX 1.2 Petrol Dual Tone, SX 1.5 CRDi, SX 1.5 CRDi Dual Tone, SX (O) 1.0 Turbo iMT, SX (O) 1.0 Turbo iMT Dual Tone, and SX (O) 1.0 Turbo iMT, are equipped with the push-button start feature (O) 1.0 Turbo DCT, SX (O), 1.0 Turbo DCT Dual Tone, 1.5 CRDi, SX (O), and 1.5 CRDi
What is the remote start fee from Hyundai?
Bluelink offers the Connected Care, Remote, and Guidance packages. Following the trial time, each plan is offered for $99 per year or $9.90 per month.
How can I tell if my car has remote starting from the factory without a key?
How can I tell if my secondhand automobile has a remote start built in from the factory? I’ve only had this car for a short while, and I still don’t know how to use it.
In less than two minutes, find out if your auto insurance is being overcharged.
a
Learning how to use a new car’s many special features might be challenging! There are a couple ways to find your car, though, if it has a remote start.
The key fob itself serves as the initial location. The key fob should feature the following buttons:
- Lock your car.
- Lock the vehicle
- Crack the trunk.
- start the vehicle
Look in the glove box for the user manual if you can’t find a start option. Used automobiles frequently include the original owner’s manual.
Another choice is to take note of the VIN from your auto insurance or window sticker and use it to look up various characteristics. Try using a website like Carfax, which provides a list of vehicle characteristics connected with the VIN.
In the worst case, call the dealership. The dealer will have information about the caras features and can give you instructions on how to use them.
Spend some time looking into your auto insurance to make sure you are still getting the greatest bargain when you are looking into your car. The Jerry app can be downloaded to help! Every six months, Jerry’s licensed agents automatically check your policy and, if they discover that you are overpaying, they send you a free estimate right to your phone.