No, only Hyundai vehicles with push-button start key fobs and either an automatic transmission or a dual clutch transmission are eligible for the remote start option. Even said, not all models provide Remote Start. In addition, using Remote Start requires a Blue Link Remote Package membership.
In This Article...
Climate Control and Remote Start
A subscription to Bluelink Remote Package is necessary. Only automobiles with an automatic transmission or a dual clutch transmission that are equipped with push button start are eligible for remote vehicle starting. Not offered on all trims and models. Use Remote Start only if it is secure to do so.
With only a few taps on the app or a simple command to Alexa, you can remotely start your Hyundai’s engine, adjust the temperature inside, and turn on the defroster.
Setting up MyKey Premium
MyKey Premium is 100% plug-and-play in Hyundai and Kia cars with the push button start capability, in contrast to the typical aftermarket remote start system. Simply unhook a few factory wiring harnesses and put in the MyKey Premium harness, with one end connected to the control box. The system is made up of a control box and a number of wiring harnesses.
The MyKey Premium installation was completed until that point. The system (or key fob) does not require reprogramming. Your Hyundai or Kia vehicle will start and keep running for 15 minutes with the doors locked if you simply press the lock button twice on the fob. Just unlock the doors as usual once you get at your car. From there, all you have to do is depress the brake pedal, engage the gears, and take off in a car that will keep you warm in the winter and cool in the summer. The engine will shut off automatically after 15 minutes if you don’t get in your car.
Although the control box and wiring harness installation is straightforward, MyKey Premium offers worldwide shipping, a PDF installation guide, and informative videos of the product being fitted in a variety of Hyundai and Kia cars.
Can I install Blue Link to an unequipped Hyundai?
Which Hyundai models come with Blue Link? The majority of Hyundai cars from 2013 and later are now equipped with Blue Link, which first debuted on the 2012 Sonata. Blue Link is not available in vehicles manufactured after 2013, such as the 2013-2017 Accent, 2013 Elantra sedan, and 2013 Tucson.
Is there a remote start app for Hyundai vehicles?
Hyundai Bluelink subscribers can connect to their vehicle via their phone via the Bluelink Mobile App. With the help of this software, you can remote start your car, turn on the lights and horn, unlock and lock your car remotely, and do a lot more.
Hyundai’s navigation will it function without Blue Link?
According to a letter delivered to dealerships, Hyundai will stop supporting its Blue Link telematics technology in older vehicles after 2021, as was first revealed by CarsDirect. The business plans to disable the Blue Link systems in Hyundais with model years 2012 through 2016 on January 1, 2022.
The letter states that the 2G cellular service that drives the system will no longer be supported by the system’s network supplier, Aeris Communications. In effect, this implies that many of the Hyundais’ safety and security measures will be turned off. Roadside assistance, SOS emergency assistance, stolen car tracking, and automated collision warning are some of these services.
All 2012-2014 Hyundai models, the majority of 2015 models (apart from the Sonata and Genesis sedans with navigation), and the 2016 Sonata Hybrid, Equus, Elantra, Elantra GT, Santa Fe, and Veloster models without navigation are on the list of Hyundai vehicles with Blue Link that are affected.
The automaker responded to our request for comment with the following statement:
These wireless service providers, who are not under the authority of Hyundai or Hyundai Blue Link, maintain the cellular networks. The wireless service provider of the network that permits the use of 2G Hyundai Blue Link devices recently announced that it will stop providing 2G cellular network service by December 31, 2021, as a result of advancements in telecommunications technology throughout time. Any trouble this may create is much regretted.
It is, to put it mildly, intriguing that contemporary technologies in our vehicles, which we depend on every day, might be overnight judged obsolete. To that aim, a complimentary three-year Blue Link membership is included with all current Hyundai cars. It offers features like remote car finder, on-demand diagnostics and alarms, and remote start with climate control.
How can I turn on my Hyundai’s blue link?
You might need to activate Hyundai Bluelink now that you have a membership in order to take advantage of all of its wonderful features. Start off by doing the following:
- 1) Switch to the primary multimedia screen of your car and choose “Settings.”
- Choose “Bluelink Settings” in step two.
- 3) Choose “Service Activation” under Bluelink Settings.
If you have any inquiries about this procedure, call Bluelink Customer Care at 855-225-8354.
Does a Hyundai key fob have remote start capability?
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button.
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
How can I start my Hyundai Elantra remotely using the key fob?
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
How can I stop using Hyundai Blue Link?
Your Connected Services are always cancelable. Call Bluelink Customer Care at 844-340-9742 for Genesis vehicles or 855-2BlueLink for Hyundai vehicles to terminate your service. You may cancel online if you bought a Service Plan online and if permitted by applicable law.
Is Blue Link installable?
Connect BlueLink to your car’s ECM port, which should resemble one of the options listed below. To make installation simple, use the corresponding plug-and-play connector. Keep in mind that BlueLink might have come with a typical wire harness for a hard wire installation.
How can I tell if my car has remote starting from the factory without a key?
How can I tell if my secondhand automobile has a remote start built in from the factory? I’ve only had this car for a short while, and I still don’t know how to use it.
In less than two minutes, find out if your auto insurance is being overcharged.
a
Learning how to use a new car’s many special features might be challenging! There are a couple ways to find your car, though, if it has a remote start.
The key fob itself serves as the initial location. The key fob should feature the following buttons:
- Lock your car.
- Lock the vehicle
- Crack the trunk.
- start the vehicle
Look in the glove box for the user manual if you can’t find a start option. Used automobiles frequently include the original owner’s manual.
Another choice is to take note of the VIN from your auto insurance or window sticker and use it to look up various characteristics. Try using a website like Carfax, which provides a list of vehicle characteristics connected with the VIN.
In the worst case, call the dealership. The dealer will have information about the caras features and can give you instructions on how to use them.
Spend some time looking into your auto insurance to make sure you are still getting the greatest bargain when you are looking into your car. The Jerry app can be downloaded to help! Every six months, Jerry’s licensed agents automatically check your policy and, if they discover that you are overpaying, they send you a free estimate right to your phone.
Is it possible to install Blue Link aftermarket?
Is it possible to install Blue Link aftermarket? It is not possible to install the blue link feature aftermarket. We do not advise installing an aftermarket sunroof on the automobile because doing so could cause the vehicle’s warranty to expire.
How can I tell whether my car has remote starting?
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
How can I turn on remote starting?
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds. When the external lights flash twice, the car will start.
Every key fob has remote starting, right?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. For instance, Ford key fobs have the same circular arrow emblem with “2x” inside the circle (other key fobs are labeled “X2,” which implies the same). This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, certain automakers, primarily BMW, have introduced redesigned key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pushing the “lock” button on the key fob, one can remotely start an engine in a new BMW by doing so. You don’t need to become daring and try out this sequence to test if the engine activates after pushing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.
Exists a Blue Link substitute?
We have collected a list of products, including NetSuite, Acumatica, QuickBooks Desktop Enterprise, and Sage Intacct, that reviewers deemed to be the best overall substitutes and rivals to Blue Link ERP.