Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. Toyota rims won’t fit on the Honda hub because the hub’s center hole is too small.
In This Article...
Can Camry wheels fit Honda rims?
Best Response. In a nutshell, YES, your 2009 Camry SE will fit the 2013 Honda accord wheels. The wheels and tires on your Camry will fit properly if your tires are the same size as those on your Honda (P215/55R17).
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
Are the lug patterns on Honda and Toyota the same?
Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
How can I tell whether my rims work with them?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
Can I use wheels from another car?
You should choose a replacement for your car with the utmost care because rims are crucial to vehicles. It would look out of place and interfere with your drive if you made the wrong choice.
Usually, you are able to swap your wheel for one from another car. The size (diameter and width), center bore, offset, and bolt pattern of the corresponding rims are some of the variables that affect this. Both sides ought to have similar characteristics overall.
Wheels for the Honda Civic can be swapped out.
You can select a different size and offset for your replacement wheels, but they must have the same bolt pattern as your factory-installed wheels. In general, we DO NOT advise getting a wheel that is wider or taller than your factory wheel by more than 2 inches.
The 5×114 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
5×114 3 and 5×100 equal each other?
They are both the same, just one is measured in inches and the other is in millimeters. It’s possible that a set of wheels with the measurements 5×100/5×114. 3 will fit both bolt patterns and have 10 lug holes drilled into the center bore of the wheel to accommodate this.