Honda: All non-sport ATVs and SxSs, save the Pioneer 1000 and Talon, are 4/110. The bolt pattern is 4/137.
With the exception of the 2019 YXZ, which has a 4/156 bolt pattern, all non-sport and contemporary ATVs and SxSs employ a 4/110 bolt pattern.
In This Article...
What is the Honda Talon’s bolt pattern?
Every Honda Talon wheel comes with a 4×136 bolt pattern as standard, although Honda claims that running rims with a 4×137 bolt pattern is also safe. The Talon also employs 12mm x 1.5 lug nuts, same like the Pioneer. The Honda Talon R 1000 and the Honda Talon X 1000 both come standard with 15 rims, in contrast to the Pioneer. The front and rear tires on these rims are 28 x 9 and 28 x 11, respectively.
The hub-to-hub width at the front of the Honda Talons is about 3 inches smaller than the rear, and the wheels have a 6+1 offset out of the box. You’ll need wheel spacers to retain factory tracking if you want to run the same offset on the front and rear. Alternatively, there are options like STI rims with an offset of 6+1 in the front and 4+3 in the rear, or System 3 rims with an offset of 5.5+1.5 in the front and a 4+3 offset in the rear that will put the front and rear widths within an inch of each other if you want your bike to have a similar front and rear width.
Has the engine in the Honda Talon and Pioneer been the same?
Honda created the 1000R for high-speed SXS circumstances, whereas the 1000X is a SXS designed with maneuverability in mind. This is the main distinction between the Honda Talon 1000X and the Honda Talon 1000R.
The same engine powers both the Honda Talon 1000X and 1000R. The Honda Pioneer is also powered by a 999cc liquid-cooled parallel twin engine with a maximum output of 104 horsepower. The 1000X and 1000R Talon versions both transmit power through a dual-clutch transmission, so while this may appear to have a bit less power than the well-known Polaris RZR on paper (DCT). More directly, this transmission sends power to the Honda Talon’s four wheels.
The two have the same hi-low sub transmission and DCT. This implies that the Honda Talon becomes a 12-speed vehicle when the paddle shifters are used. This improves the driving experience in terms of obstacles or speed.
What is the Honda Talon’s wheel offset?
Both Talons have 15-inch wheels that are 8 inches wide in the back and 6.5 inches wide up front. The rear wheels have a 33mm offset.
How much tire space is available on a Honda Pioneer 1000 stock?
We have everything you need if you need a little more space for larger tires. With our 3 lift kit and our Front and Rear 1.5 Offset High Clearance A-Arms, you have space for 30 tires. They are also as simple to install. After breakfast, if you start installing everything, you’ll be eating lunch out on the trail. The following four key benefits of these A-arms:
Because of its high clearance, you may easily roll over debris that would otherwise damage your suspension. So you can bike straight over a rough stretch of road without worrying about it denting up your arms.
You get a 3 longer wheelbase thanks to the 1.5 offset on the front and rear wheels. With additional stability and a smoother ride provided by a longer wheelbase, climbing hills and other inclines will be simpler. Additionally, the 1.5 offset offers you space for larger tires. With just these A-arms, 28 tires can fit. You can fit a monster 30 tire if you install them with a 3 lift kit.
You don’t have to worry about pushing them too hard because they have a lifetime warranty in addition to all that.
Honda Talon wheels would they fit?
The Talon’s lug has a different thread than the Can Am’s, despite the fact that their bolt patterns are identical. The same bolt pattern will therefore function, but if your spacer uses CanAm lugs, your Talon’s lug nut will not fit.
What is a Honda Talon’s top speed?
A race between these two side-by-sides would be tremendously entertaining to stage because they have nearly identical horsepower and attention to detail in terms of balance and capacity. Who would win, though? Is the Polaris RZR slower than the Honda Talon?
Honda limits the Talon’s top speed to 75 mph, whereas a Polaris RZR typically cuts out at 80 mph (depending on the model). A race’s outcome is still heavily influenced by the weather and the drivers themselves. It would be anyone’s game if the two actually engaged in a race.
What distinguishes the Talon 1000X and 1000R?
Now that we have examined each model separately, let’s compare them. Even though the two models are very similar, it is obvious that each is designed with a certain customer in mind. The major difference between each model is its suspension, which also defines its optimal application.
You get a wider front offset and more suspension travel with the 1000R. This makes it perfect for taking on high-speed tracking and smashing the major bumps.
You get closer front wheels and less suspension travel with the 1000X. This makes it easy to move and produces precision handling.
The Talon X is the best option if you want to go rock climbing or travel through wooded, narrow routes. The Talon R is a better option if you like to drive aggressively.
How quickly can the Honda Talon 1000 travel?
Surprisingly, the 2021 Polaris Ranger XP 1000 Trailboss accomplishes 64 mph, compared to the 2021 Honda Talon 1000X’s peak speed of 73. Even so, the utility rig is still quite rapid.
Can 14-inch wheels be used with a Honda Talon?
The editors of UTVGuide.net ran several hundred kilometers of difficult terrain on a brand-new Honda Talon equipped with STI X Comp tires mounted on HD9 Beadlocks. The whole report is available on the UTVGuide.net website, and you can view some of the highlights and pictures below.
said UTVGuide:
- The 14-inch tires that STI offers do fit after extensive testing in-car with both prototype Talon units and their own company-owned Talon 1000R.
- Since STI has done its research, they already sell offset-compatible 14 and 15-inch wheels that will fit the Talon X and R.
- It’s a fantastic vehicle with a lot to offer the enthusiast who spends most of their time outside of sand dunes. Among the features are the plush suspension, plenty of bottoming resistance, excellent turn-in, and a reliable motor.
What tire size does a Honda Talon 1000R come with?
The 28-inch height of the Talon Maxxis OEM tires. Without changing the suspension, the 32-inch-tall EFX tires we installed produce a lift of almost 2.5 inches.
Will a Honda Pioneer 1000 accommodate tires measuring 30 inches?
We intentionally arched the lower control arm in two places to maximize clearance and followed the angle of the axle for aesthetic appeal. Each control arm bolts on just like the factory arm thanks to our highly precise production process. With these Front Forward Arms installed, your Pioneer 1000 can run a 30 tire without a lift. What’s more, this kit is compatible with our 2-lift kit! Run 31 tires by adding the lift and front forward arms.
Maximum Clearance Front-Facing The front hubs are moved 1.5 inches forward by the Upper & Lower Control Arms to pass obstacles without elevating the ride or shifting the center of gravity. Heavy-duty 1.25 steel tubing is used to make the upper and lower control arms, which are then powder-coated in stock Honda black. With these arms, 30 tires may be run without a lift.
Precision cutting of the High Lifter logo into the bracing of the upper control arms lets other riders know you mean business when it comes to your Pioneer’s heavy-duty accessories. For a simple installation, you’ll use OEM ball joints and standard bushings.
Kit contains 4 powerful control arms. 1 bushing and sleeve kit for the steering stops on the upper and lower control arms Hardware and Guidelines
How reliable are Pioneer tires?
What quality are Tri-Ace Pioneer M/T tires? Yes, drivers of Jeeps, light trucks, and SUVs who require a cheap tire that is designed to perform in mud, dirt, rocks, and other off-road terrains can consider Tri-Ace Pioneer M/T tires.
What tires do Honda Talons come with?
Tires. The Talon-specific front 28x 9-15 and 28x 11-15 tires are the result of a collaboration between Honda and Maxxis to create the optimal traction, damping, feel, and wear characteristics.
A Honda Talon’s rims are what size?
Although you may use a variety of alternative size wheels on the Honda Talon 1000, going with the OEM 15″ wheels is the way to go if you want to maintain the factory look. This section contains a list of all of our 15-inch wheels “size. There is undoubtedly a wheel that will suit your needs among the wide selection of models we provide in both beadlock and non-beadlock wheels.
For reference, the Honda Talon’s bolt pattern is 4/137, and its factory wheels measure 15×6.5 up front and 15×8 back. most 15 aftermarket “You can run wheels that are 15×7 all the way around and will make up the difference.