In California, holding your phone while driving makes it simple to get a ticket. However, if you have access to Bluetooth, it is quite avoidable!
Fortunately, Honda’s HandsFreeLink system is simple to use and rearrange. To remove Bluetooth devices from your 2019 Honda Civic, just follow these easy steps:
- Your car’s phone button should be selected.
- By using the scroll wheel’s middle knob, select Phone Setup.
- Select the Connection option by scrolling to it.
- The next menu should have a Delete a Phone option; choose it.
- Select the phone you want to delete using your scroll knob after deciding which one it is.
- To confirm your choice, select Yes from the menu that appears.
- If the phone was deleted, a screen should show that it was done so.
With any luck, following instructions will enable you to remove a Bluetooth device from your 2019 Civic. Keep in mind that California is a hands-free state, and using your phone while driving could result in heavy fines.
Take a moment more to work with Jerry to determine the coverage you require because you are already taking the effort to remove Bluetooth gadgets from your car. The Jerry app, a registered broker, offers free personalized price comparisons from more than 50 leading companies, including Allstate and Progressive. Jerry can assist you in switching insurance policies and even in canceling your current one after you’ve found the one that best meets your needs.
In This Article...
Why can’t I use my phone to connect to my Honda?
Ensure that your equipment is completely charged.
Low-battery devices will have trouble sending a strong signal to the Bluetooth module in your Honda. Due to the fact that Bluetooth relies on radio waves, a device with a weak signal will have trouble connecting.
Is there another nearby Bluetooth-capable device?
It’s conceivable that interference from other devices is to blame if you are having trouble using Bluetooth to pair your device. Due to the fact that Bluetooth uses an unlicensed portion of the radio spectrum, this issue is actually fairly prevalent. Make sure Bluetooth is disabled on nearby devices before beginning troubleshooting.
Reset if you’re unsure.
Disconnect everything and start over is probably one of the greatest things to do if you are experiencing connection problems. We advise disabling Bluetooth on your device and deleting it from the list of previous infotainment connections on your Honda in order to accomplish this. Then switch your device and your Honda on and off. Try connecting again once your smartphone and Honda (car in accessories mode or engine starting) are both back on.
Is Bluetooth reception unreliable where you are?
Sometimes the interference is brought on by your location in the city or by a Bluetooth-enabled gadget inside the car. If you have done everything and are still experiencing issues, you might want to take a short drive away and attempt connecting again.
My Honda HandsFreeLink needs to be reset.
Your HandsFreeLink (HFL) system may need to be entirely erased on occasion.
You must carry out the following:
- Activate the chat button.
- Say “a system setup
- Observe the instructions.
- Say “clear
- obey the HFL instructions.
Why won’t my iPhone and Honda communicate?
How to Fix the Apple CarPlay Connection on Your Honda Restart both your automobile and your iPhone. Go to Settings > General > CarPlay to re-configure CarPlay. To forget this car, tap your car first. If connecting by wire, experiment using a different USB cable and USB port.
Why won’t my car’s Bluetooth function?
Is your vehicle’s Bluetooth not functioning properly? Do you use Apple or Android devices? Before you start pulling out your hair, try these techniques! You might want to go over how to couple with your automobile first.
The most common customer complaints we receive have to do with syncing Android contacts. The user cannot access contacts while the phone is pairing itself. No names, no numbers, or numbers only. How come? There is an easy answer!
ISSUE: Bluetooth commands in the car cannot be used to access contacts on an Android phone. Perfect pairing, but you can’t access your contacts or phone numbers.
Solution: When you first pair the phone with Android, make sure all of the dialogue boxes are checked. Has your phone been paired before? No need for concern! Simply remove the car from your phone’s list of associated devices, remove the phone from your vehicle’s list of paired devices, and RE-PAIR your phone!
Once pairing is complete, many Android devices, unlike Apple goods, will ask for different accesses.
The car might request access to contacts, SMS, audio recording, and other features; select “Allow” and then select “Do Not Ask Me Again” to dismiss the prompts in the future.
Many Apple users express worries that their car cannot access their contacts, much like Android users do. Although the phone is connected, the car doesn’t seem to be able to access contacts. The answer is simple!
ISSUE: Apple iPhone/iPad pairs with the car’s Bluetooth system without a hitch, but contacts cannot be accessed.
FIX: Ensure that the contacts can sync on your smartphone. Select “Settings,” then “Bluetooth,” and then look for the car that’s having trouble pairing. As soon as you tap the I button next to the car, make sure “Sync Contacts” is ticked in every box.
Important: You must still complete the process after choosing to “Sync Contacts”! Completely shut off the engine before opening and closing the driver’s door. Restart the engine after that, and then choose your phone from the list of linked devices! You ought to be prepared!
Do you still have issues getting your phone and car to sync via Bluetooth? There is one tried-and-true thing you can do even if your bluetooth isn’t functioning. Remove, Remove, Replace!
In many cases, it is simpler to simply unpair Bluetooth and re-pair than it is to try to diagnose a problem while paired. Here is how to accomplish it:
1) On your phone, go to the Bluetooth settings and completely erase the vehicle you want to connect to.
2) Go to the vehicle’s Bluetooth settings and completely erase the phone you’re attempting to connect.
Recouple the two! Enter the vehicle’s “Bluetooth” menu and let it look for a device. Turn on Bluetooth on your phone and wait up to 30 seconds for the vehicle to show up on the list. then stick to the directions!
DID YOU FIND THESE ADVICES USEFUL? ARE YOU STILL HAVING PROBLEMS? COMMENT BELOW AND LET US KNOW!
How can I connect my Honda Civic?
Honda Bluetooth Setup Guide in Steps
- Make sure your mobile device has Bluetooth turned on.
- Press the Home button in the upper left corner of the Honda multimedia screen to start.
- To confirm, press “Yes” after selecting “Phone.”
- Choose HandsFreeLink from the Bluetooth menu on your mobile device.
Why won’t my iPhone pair with the Bluetooth in my car?
- Turn off Bluetooth by going to Settings > Bluetooth. Turn on Bluetooth once more after waiting for roughly 5 seconds.
- For more details on how to pair with a Bluetooth device, consult the owner’s manual that came with your automobile. The majority of vehicles demand phone setup on the dashboard.
- Try renaming your device if you have many phones connected to your car stereo: Enter a new name by going to Settings > General > About > Name. Then attempt reestablishing contact.
What is the Honda CarPlay reset procedure?
Re-engage CarPlay
- Open the Settings app, then select General.
- Press CarPlay.
- To forget this car, tap your car first. If all else fails, try disconnecting and re-connecting your iPhone’s connection to your automobile.
- Reset your vehicle.
Why won’t my phone pair with my Bluetooth device?
If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.
How can I get HandsFreeLink unlocked?
Press and hold the talk button on the steering wheel while the ignition is in the ON (II) position. When you hear the beep, say “Security.” Security options include lock, unlock, and set passcode, according to HFL.
Why won’t my smartphone and automobile pair?
The Bluetooth system can be reset in a variety of ways. The “soft” reset can fix some Bluetooth connectivity issues. Remove the vehicle profile from your phone and turn off Bluetooth to reset the system. Remove your phone number from the system in your car. If there is a Bluetooth option for vehicles, disable it. Now that Bluetooth is enabled on both your phone and the car’s infotainment system, try to couple the devices once more.
How can I restart my car’s Bluetooth?
The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.
Install the Latest Updates
Make sure to use the most recent apps and iOS version. Numerous people reported that the issue was resolved for them with iOS 15.3 and later. Your gadget might act weirdly as a result of outdated software. Tap Software Update after choosing General under Settings > Settings > General.
Open the App Store and press your profile picture to update your apps. Then, select Update All under Upcoming Automatic Updates by scrolling down. Verify the GPS and navigational app updates.
Then restart your iPhone after turning Bluetooth off in Settings. If you detect any changes, check.
Route Call Audio to Bluetooth Headset
- Make your go to Settings.
- Enter Accessibility, then select Touch.
- After that, select Call Audio Routing.
- As the preferred location to receive your calls, choose Bluetooth Headset.
While this remedy might not completely resolve the issue for all users, it should drastically lower its incidence. Some calls on your iPhone might still be dropped, but the majority of them should work.
Forget All Bluetooth Devices
- Reset the settings.
- Find the Bluetooth menu by navigating.
- The Bluetooth devices linked to your iPhone should have an Info icon next to them.
- Then select Forget This Device.
This same holds true for the Bluetooth connection in your car. Reconnect your iPhone to your car’s Bluetooth after that.
Reset All iPhone Settings
To be sure they are not interfering with the Bluetooth connection in your automobile, reset all of your iPhone’s settings. Go to Settings, choose General, and then hit Transfer or Reset iPhone to accomplish this. Go to Reset All Settings after choosing the Reset option.
Remember to reboot your smartphone. You can alternatively remove your SIM card, wait a few minutes, and then re-insert the card. Get more assistance from Apple Support if the problem continues.
Conclusion
Update iOS and all of your apps to the most recent versions in order to resolve the problem where the iPhone 13 disconnects from your car’s Bluetooth during calls. Route Call Audio to your Bluetooth headphone after that. Additionally, unpair your iPhone from all Bluetooth devices and re-pair it with the Bluetooth in your car. Reset all iPhone settings if the problem continues, then get in touch with Apple Support.
Have you ever experienced an iPhone call drop when using Bluetooth in your car? Have you tried other methods of problem-solving? Tell us in the comments section below.