Your SRS, or Secondary Restraint System, is a crucial safety element because it’s made to control the airbags. Have a mechanic inspect your car and ask them if there are any recalls on it to make sure there are no current problems before you reset the SRS light yourself.
Here’s how to turn off the SRS light on a 2002 Honda Accord if you’ve made sure there aren’t any other issues:
- Fuse box is located underneath the steering wheel. To access the fuse box, remove the panel.
- After removing the panel, several wires and connectors ought to be visible. Find the Memory Erase Signal (MES) connector, which is often a two-hole hold plug in green or yellow. Take out the plug.
- Untwist a metal paper clip to create a U shape. Fill the two-hole plug with the paper clip. This will cause the MES connector to short circuit.
- Put your car keys in the ignition to start the engine while keeping the paper clip in the two-hole plug. Never start the vehicle. The SRS light will flash briefly before going out. The two-hole plug and paper clip should be unplugged.
- The SRS light will turn on once more after the paper clip is taken out. To turn off the SRS light, re-insert the paper clip into the two-hole plug. Take remove the paper clip after turning off the light.
The SRS light will blink twice, indicating that the SRS system and light have been successfully reset. However, if your light returns after the system has been reset, you should get in touch with a professional right once.
Consider reviewing your auto policy to ensure you are paying the lowest prices possible for your coverage while you are taking the time to fix your SRS light. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
In This Article...
What does the Honda Accord’s SRS light mean?
In my shop, I had to deal with this only last week. The supplemental restraint system’s SRS light serves as a warning light (airbags). A system issue is indicated by the presence of an SRS light. The fuse for the SRS unit is the first item I would check. This can only be verified with some form of scan instrument. A Solus Pro was mine. The first portion of the numerical error code is displayed by the scanner’s slow flash, and the second portion is displayed by the scanner’s quick flash. You should examine the code and go from there, in my opinion. It will probably display a “non-functional” code; this is a regular issue. In the 2000 Accord EX that I worked on last week, I had to completely replace the SRS unit.
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
If the SRS light is on, will the airbags deploy?
When the airbag light comes on, the vehicle’s airbag system is malfunctioning. Due to this flaw, the airbag is unlikely to deploy after an accident. As a result, it is not advised that you use the car until the system has been fixed.
Never disregard the important caution. There’s no need to gamble with the car, even though it doesn’t make it unsafe to drive.
The light does, however, show that the SRS parts are not functioning properly. This may potentially indicate that the airbags won’t activate in the event of a collision. You shouldn’t wait until you are involved in an accident to determine whether the airbags will keep you safe.
Will the airbag light be reset if the battery is disconnected?
The clock spring, sometimes referred to as a spiral cable, coil assembly, contact reel, or cable reel assembly, is a significant part that, if destroyed or damaged, can result in the airbag light turning on. Not only is it one of the most frequent causes of a flashing airbag light, but it is also one of the most costly to fix (at least $400). If you change the clock spring yourself, you can save money as long as you use extreme caution and follow the manufacturer’s recommendations.
If you believe it to be the issue, you will need to gain access to the interior of the steering wheel(view on Amazon) to make the necessary repairs. This shouldn’t be a cause for concern because the full procedure just requires 10 stages and takes under 20 minutes to complete:
How to Fix a Clock Spring
- Wait for the capacitors to drain for at least ten to fifteen minutes after removing the negative battery line from the terminal. (Note that merely disconnecting the battery terminals from the car will not cause the airbag light to turn off.)
- Hold the center of the wheel (where the airbag is located) in place while the wheels are straight and look for the screws. After that, unscrew them.
- Pull the airbag away from you to remove it, then unplug the connectors (you may use a pick to slide the yellow clips out when doing this). The screws holding the steering column trim in place are also visible while turning the steering wheel from left to right.
- Mark the location between the steering wheel and steering column trim with two pieces of painter’s tape when the steering lock is activated. When later putting the steering wheel back in its original position, this reference point will be useful.
- With a breaker bar, loosen the steering wheel nut without taking it off entirely.
- Once the wheel is free, take off the nut and wheel to reveal the clock spring.
- Disconnect the harnesses at the bottom or back to remove the clock spring. Put a fresh clock spring in its place. Bend the tab until it snaps to release it.
- When reinstalling the steering wheel, use your tape marks as a guide to align it correctly.
- Install the harnesses and the airbag after tightening the steering column nut with a torque wrench (or your hands and a breaker bar).
- Reconnect the negative battery terminal and reinstall the trim piece on the lower steering column (see on Amazon). After completing the last step, your airbag light should stop flashing.
What does an SRS light mean?
When the SRS light comes on while you are driving, there is a problem with the airbag system of the vehicle. Additionally, it implies that if you are in an accident, the airbags might not deploy. Take your automobile to have the SRS sensor checked as soon as possible if the light illuminates.
The Mercedes-Benz S-Class used a driver-side airbag for the first time in a production car in 1981. Since September 1998, front driver-side and passenger-side airbags have been a requirement for all vehicles and light trucks sold in the US.
An airbag is referred regarded as a passive safety device because the mechanism doesn’t require any activity from the driver to operate. However, the technology and methods that activate airbag deployment have become more complicated over time.
There are numerous varieties of airbags in contemporary vehicles, and each one needs precisely calibrated sensors to deploy. This technology helps to prevent any unnecessary deployment of the SRS system in the vehicle, but it also implies that the system may need to be checked out every so often.
Airbags save lives, and while the original driver-seat airbag has been improved, they are still ineffective if the sensors are malfunctioning. Don’t disregard the SRS light on the dash if it comes on. Your automobile will believe there is a problem until the system has been professionally evaluated, and you could endanger both your safety and the safety of your passengers.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
What does the internal SRS unit failure mean?
If the SRS unit displays the code 5-1 Internal Failure, the car has been in an accident, and the ACM airbag control module has crash information recorded in it. Any diagnostic scan tool won’t be able to clean or remove this code. The message “cannot run routine” will appear.
Can the airbag light self-reset?
It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals operate on the airbag system. To reset the airbag light, adhere to these instructions:
Step 1: Check the passenger airbag switch
There is a “passenger seat Airbag on/off button” in some autos. When attempting to remove the airbag light, you ought to start by doing this. It’s possible that someone turned it to Off by accident before you, which will cause the airbag light to remain on in most cars. If you open the passenger door or glove box, you might be able to view this button, which is often located on the passenger side of the dashboard.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
Step 4: Clear the trouble codes
It’s time to reset the engine light when you have completely installed the new parts and are confident that everything is installed correctly. There is no other way to accomplish this; you must use an OBD2 scanner. Make that the airbag light is reset and that it no longer appears on the dashboard. If the problem persists, read the codes again and look for any error codes.
Step 5: Restart your car & test-drive.
Restart your engine and take a test drive if your dashboard’s airbag light appears to have disappeared. After a test drive, if the airbag light has disappeared, there is a good likelihood that the issue has been resolved. Reread the codes and carry out the steps again if the issue reappears.