To obtain your radio code, follow the instructions below. If you are still unable to unlock your radio, visit your nearby Honda dealer for assistance or call Honda’s customer care department at 1-800-999-1009.
In This Article...
Why is my Honda asking for the Honda radio code?
When you replace the battery, your Honda will frequently ask for a radio code. The radio will request the code each time the battery is disconnected or becomes entirely dead. The radio will typically automatically reset and resume functioning properly if you simply press and hold the power button for two seconds. You won’t need to enter the code. You will need to enter the Radio Code if this doesn’t work.
How to retrieve the Honda radio code.
- The owner’s manual or glove box are the first places to seek for the radio code. The code is on a sticker that is typically adhered to or put inside the glove box. You may also stick it in the owner’s manual. The radio serial number will also be printed on this sticker. A rendering of what it will look like is on the left.
- You can also take it to your neighborhood Honda dealer, who will be able to take care of it for you, to recover the radio code.
- You may also look it up online using the link below if you can’t go to a Honda dealer.
What is the Honda radio code?
The Honda Radio Code Retrieval Look inside your glove box for a sticker with the radio code; alternatively, consult the owner’s manual of your car on the sticker. The same credentials used for your Honda Navigation system will also be required for your Honda radio code, which has a specific serial number.
What should I do if the radio on my Honda says code?
Disconnect the black negative under-hood battery cable for one to three minutes to reset the system if the radio displays an error (ERR) message. RESTART THE RADIO AND LISTEN FOR THE WORD “CODE.” THE 5 DIGIT RADIO CODE MUST BE ENTERED. TURN OFF THE RADIO AGAIN.
Where can I get my radio code?
People frequently ask drivers for their car radio codes. There is still a strong probability that the code can be located while still in the driver’s seat, even if you purchased an older used automobile.
First, try these locations:
- former owner You might try contacting the prior owner if you purchased the car used. Check to see if they wrote down the code or saved an original copy.
- Dealership
- The solution might be kept by an authorized dealer. To establish that you are the vehicle’s owner, you’ll generally need to have your logbook or V5C paperwork on hand.
- vehicle manual
- The code may be located under the sections on security or the stereo in your car’s owner’s manual. Alternatively, some codes can be located inside the manual on a small piece of paper or a plastic card.
- Glovebox
- On a label in the glove compartment, there are some radio codes.
- site for the manufacturer
- You may find additional details on how to get the code on the manufacturer’s website. For assistance, you might be sent to a licensed dealer.
With no code, how do I open my radio?
Approach 1:
- Start the engine.
- If CODE appears on the screen, turn off the radio.
- For 40–50 seconds, hold down the Power/Volume button.
- In less than a minute, your radio ought to be unlocked.
How can I reset my radio now that the battery has been changed?
If none of these guides proves successful for you, your last resort is to stop by a nearby car radio installation shop. Depending on the model of your radio, they might be able to unlock it.
You’ll recall that I said I’d demonstrate how to bypass automobile radio codes. This trick was something I recently discovered, therefore I choose to share it with you in this blog. This hack has been tested on Honda and Acura vehicles, and it is effective. The Acura ILX, Acura TLX, Acura RDX, Honda Pilot, Honda Civic, and Honda Accord are the specific models that this technique will work on. These automobiles must be 2010 model year or newer.
- Make sure your ignition is in the ON position if you want to bypass the radio security codes on these cars.
- It must be held for around 40 to 50 minutes. Your automobile audio system will come on and bypass the code at this time.
- If CODE appears, turn on your audio system and check it. If it does, stop using it.
- The radio power button should then be pressed and held down.
The makers of your cars don’t want you to know about this trick. Yes, I did precisely that. How to unlock the Ford radio without a code is a different hack I want to share with you. The above trick and this one are similar. On a Ford BA, I watched it operate. However, you can give it a shot on other Ford models to see how it turns out.
- For roughly 50–60 minutes, press and hold both the SEEK and audio power buttons. Without requiring the radio code, it will then switch on.
- Check to see if your radio shows CODE or LOC when it is turned on. Turn off the radio if it does.
- You must turn your ignition to the ON position in order to accomplish this.
Why does the radio in my car say code?
A brief string of numbers known as a car radio code is connected to a security feature found in some head units. By rendering a stolen head unit useless when it is unplugged from the battery, it serves as a deterrent to theft. However, if your battery dies, this feature also activates.
How can I retrieve my Honda Accord’s radio code?
Verify the glove box. The serial number and code of the radio should be written on a sticker inside. Consult the owner’s manual. The radio code will be written down there.
Is the VIN number a source for radio codes?
You normally input your VIN, the radio’s serial number, and contact details like your phone number and email if the company that developed your car supports online code lookup. You could receive the code by email for your records.
How can I obtain the radio code for my Honda before removing the battery?
The body of your radio unit bears the serial number of your radio. You must take the radio out of the dash to get to it. If you’re unclear of how to remove the radio correctly, check your owner’s manual or take your car to a mechanic. Damage to the radio and dashboard may result from improper radio removal.
You can get your radio code in one of three ways after you have your radio serial number:
To Access Your Honda Radio Code via Phone
Dial 1-800-999-1009 to reach Honda America Client Services. Your VIN number, radio serial number, and ownership documentation will need to be provided.
To Access Your Honda Radio Code from a Dealership
Bring your radio’s serial number and ownership documentation to your neighborhood Honda or Acura store.
Once you’ve located your radio code, note it down for any future uses as it won’t change.
Why won’t my car radio operate now that I’ve changed the battery?
The anti-theft “feature” that activates if battery power is taken from the radio is the most frequent cause of a car radio ceasing to function after the battery has entirely died. If that happens, all you need to do to get back on track is input the proper auto radio code.
My Honda Accord is requesting a code; why?
Why would a Honda Accord radio code be required? Your Honda Accord’s radio will ask you to input a code if you replace your battery or it dies for some other reason. Typically, this may be fixed by holding down the radio power button for a short period of time until the radio turns on—no code required.
Check Your Ownership Booklet
A card, an owner’s manual, and a maintenance manual were all included in a booklet if you purchased your Honda brand-new. Your Honda radio code is printed on the card. “Anti Theft Identification Card,” it states. Additionally, it is printed with the serial number of your radio. The NAVI code and serial number are present if your Honda supports navigation as well.
Look In and Around the Glove Box
Before you acquired ownership of your automobile, the dealership may have affixed a label with the radio code in the glove box. A five-digit number on a little white label is what you’re looking for. It could be positioned on the side or inside the glove box, only being visible when the glove box is opened.
Find the Radio Code Online
If your car or materials don’t have the Honda radio code, you can look it out online. The VIN number of your automobile and the serial number of your radio are the two things you’ll need. Both are required.
Go to the webpage for Honda Radio-NAVICode. Enter the radio serial number, your name, your VIN, and whether your car has two devices (meaning NAVI or not). You’ll receive the Honda radio code after clicking SUBMIT.
Enter the Radio Code
The radio code is quite easy to enter. The radio preset buttons are all connected to the five digits. A “C” appears when you dial the first number in the radio code. For the remaining numbers, repeat the process. O, D, then E will be called, and the radio will start playing on the last number.