Learn the answers to some of the most frequently asked questions regarding Honda pressure washers. You can contact us whenever you need more assistance. We’re pleased to answer inquiries about individual items, but depending on the query, you might need to get in touch with the manufacturer.
In This Article...
Does Honda make a pressure washer?
It’s interesting to note that Honda doesn’t manufacture pressure washers under its own name in the US. The WS1010 and WS1513 are two models that are offered in Japan, but for whatever reason their American power equipment section has chosen not to market them.
How much does a Honda pressure washer cost?
The ultra-powerful GX690 OHV V-Twin engine powers the most costly, over $10,000 Honda pressure washer, which costs $329 and employs the GCV160 engine. Having said that, a Honda-powered pressure washer typically costs between $400 and $500.
How to start a Honda pressure washer?
The size and model will determine this. The startup process for the GX series is the same across all sizes, but even between the two sizes, the controls are different for the GC series. Specific instructions are listed below in the list:
- Beginning any GX (or GXV): There is a fuel valve, throttle adjustment, and power switch. Turn on the power switch, pull the recoil starter, and then open the fuel valve, choke, and throttle in that order. After the engine has warmed up, close the choke and, if necessary, adjust the throttle.
- Start a GC160 (or GCV) as follows: Both a power switch and a fuel valve are absent. Instead, the throttle is adjusted via a silver lever (which automatically turns the power on and activates the fuel pump). Pull the recoil starter, open the choke, and fully extend the lever. After the engine has warmed up, close the choke and, if necessary, adjust the throttle.
- Start a GC190 (or GCV) as follows: There is no fuel valve or throttle adjustment. In its place, a red ON/OFF power switch is present (which activates the fuel pump and automatically adjusts the throttle). Pull the recoil starter, open the choke, and turn the switch. Close the choke after the engine has warmed up.
What kind of gas does a Honda pressure washer use?
For both the GC and GX series, unleaded fuel with an octane level of 87 or higher is advised. Fuels containing ethanol, such E85, are often not authorized unless specifically indicated.
What kind of oil does a Honda pressure washer use?
For general, all-temperature use in both the GC and GX series, SAE 10W-30 oil is advised. Although typically not necessary for optimum performance, synthetic oil is advised.
What is the leading manufacturer of pressure washers?
An experience that can only be had with a pressure washer is watching years of mildew be blasted off a piece of patio furniture (also called power washers). The Ryobi RY142300 2300 PSI Brushless Electric Pressure Washer is the best pressure washer for the majority of households, according to our analysis of eight pressure washer models over the course of two weeks and more than 80 hours of research. All of the electric washers we examined performed well in terms of cleaning, but the Ryobi stands out from the competition due to its robust motor, longer hose, larger wheels for easier movement, and longer guarantee.
Does Simpson make use of Honda motors?
We will contrast Simpson with two other pressure washer manufacturers. Greenworks and Generac are the two brands we’ve selected to contrast Simpson with.
Greenworks
The Greenworks GPW1501 is likely the most powerful pressure washer available that is electric and smaller in size. The system has an output standard that is above its range. It has a 1500 PSI pressure rating at 1.2 GPM. Due of its small size, it is very affordable, portable, and simple to operate. With its numerous quick-connect nozzles, you may use it on a wide variety of surfaces. Numerous gadgets with corded and cordless options are available on this pressure washer.
Generac
The petrol-powered Generac 7122 pressure washer is excellent value. The Generac 7122 SpeedWash is the answer to your search for an ordinary washer that performs as well as a professional washer. The many forms of dirt and grime on your walls, walkways, hot tub, and gutters have no chance against this pressure washer’s 3200 PSI at 2.7 GPM pressure level.
Verdict
We provided you with two distinct brands of pressure washers that are powered by gas and electricity. The Simpson electric washer (which we have featured in our top recommendations) does modest duties, such as cleaning decks, BBQ grills, and other items, pretty well, even if Greenworks is one of the best for electric-powered ones.
It is rather obvious which pressure washer is superior between the Generac and the Simpson MSH3125 MegaShot Gas Pressure Washer (both of which are among our top recommendations). The Simpson model completes the task with ease and sports a Honda engine with higher PSI and GPM. The Generac is lighter, though, which would make it easier to transport while working.
How long is the lifespan of a Honda pressure washer?
The house, decks, sidings, driveways, and a variety of other surfaces and items can all be cleaned with pressure washers. Knowing if pressure washers are durable makes sense because they can be expensive investments. The value of a pressure washer is another subject I frequently get asked.
What is the lifespan of pressure washers?
The majority of well-known pressure washer manufacturers typically offer a 500-hour warranty on their equipment. The average person uses it for 50 hours a year. Therefore, a pressure washer that is properly maintained ought to survive for at least ten years. Of course, this varies from brand to brand and from individual to individual.
You may learn more useful facts about the lifespan of pressure washers from this page. I’ll demonstrate how you can make your pressure washer and pressure washer pump last longer.
Who produces the best engines for pressure washers?
However, class-leading performance is not inexpensive. It’s pricey for an electric pressure washer at around $400. But this is the most effective cleaning without a gas engine for the powerplant.
What PSI should a pressure washer have?
In general, I advise using a pressure washer with 1.4 to 1.6 GPM and 1200 to 1900 psi of pressure. Start with a lesser pressure and gradually raise it as necessary. Use a white or green nozzle.
An efficient and effective way to clean your car is using a pressure washer. Electric and gas pressure washers are the two different types of power washers. I suggested utilizing an electric pressure washer to wash your automobile. Greater psi are used by gas power washers. Make sure the pressure is set to a lower setting if you use one.
Does Simpson use Honda motors in their pressure washers?
This Simpson pressure washer has a Honda engine, so it may be used for basic maintenance around the house or to remove years’ worth of rust stains off sidewalks.
What does the acronym Honda GCV mean?
Product Power. The all-new GCV Series engines will be on sale in September 2018 for manufacturers (OEMs) of various power products in Europe, according to a statement released by Honda Motor Co., Ltd. today.
How much PSI will I require to wash my driveway?
There are numerous pressure washer choices to think about, including:
- electric and gas models
- large, professional-grade machinery
- walk-behind surface cleaners with wheels
- There are different pressures (PSI)
- small, lightweight devices that you connect to a garden hose
What PSI pressure washer do I need to clean concrete?
Use a power washer with a minimum pressure rating of 3000 psi and a minimum flow rate of 4 gallons per minute to efficiently clean concrete (gpm). Although stubborn pollutants like paint and substantial tire-skid markings may require higher pressures to be removed, the majority of power-washing contractors concur that 3000 psi will work for practically all cleaning tasks.
Flow rate and nozzle type
The pace of cleaning is determined by flow rate once a suitable water pressure has been reached, particularly how quickly pollutants are washed from the surface. Higher flow rates are needed for heavily filthy concrete. The use of a power washer with a volume output of 5 or 6 gpm is advised by numerous contractors. Higher flow rates are less important while cleaning vertical surfaces since gravity aids in the removal of pollutants.
Using a rotational nozzle rather than a regular fan nozzle will also speed up cleaning. Standard nozzles deflect the water at an angle, which slows it down and creates a fan pattern. Unreflected water jets exit rotary nozzles with a higher speed because they travel in a round path.
What is the best pressure washer for driveways?
The Simpson Cleaning MegaShot Gas Pressure Washer, which has a maximum psi of 3,200 and can handle driveways, outdoor furniture, cars, and more, is the greatest pressure washer on the market. But pick the Karcher K5 Premium Electric Power Pressure Washer if you’re searching for something designed exclusively for autos (view at Amazon). It makes car washing simple because to its built-in detergent tank.
What PSI am I going to need to clean my deck?
You will be best served by utilizing the lowest pressure level that is still functional when washing a hardwood deck. This is typically between 500 and 600 psi for soft timbers like cedar or pine. It may reach pressures of 1200 to 1500 psi for harder timbers.
Pick the appropriate tip to employ as well. Generally speaking, a fan tip or revolving tip (applied cautiously) will work best for cleaning wood. Always start the water pressure in a safe location, away from people and glass windows, and at least two feet from the wood deck. Then, gradually increase the distance from the deck to a range of roughly a foot to 18 inches. Never approach the deck closer than 12 inches, unless you’re using low pressure.
Keep in mind to start in a place that would be simple to fix or replace. Consider beginning with a stair tread, which is easier to replace than a whole deck board. Once you’re certain that the pressure is set correctly, start from the house and move outward while maintaining a constant distance and sweeping along the grain of the wood. Before staining your freshly cleaned deck, you will need to sand it if the cleaning raised any soft wood fibers.
Trusted By DeWalt and Briggs & Stratton
Some of Simpson’s products are sold with DeWalt stickers since the company has a license to use the DeWalt trademark. Here is the press release that provides further information. They have been doing this since 2009. They use industrial power washers made by Briggs & Stratton in the same way.
This is one more justification to purchase a Simpson. Anyone could get a license from DeWalt and Briggs & Stratton to use their names in the pressure washer industry. Any business would be fortunate to have those labels placed on its equipment. However, they both went with Simpson.
Why? Simpson met their criteria for quality, according to their team of engineers, technicians, and researchers in the Licensing and Product Development Divisions. Very good!
Value For Money
The cleaning business is well renowned for its Simpson brand. DeWalt, however, enjoys far greater credibility when it comes to sales in establishments like Home Depot, Lowe’s, and Walmart. People are willing to pay more because they are renowned for providing high-quality goods.
The cost of Simpson units with DeWalt branding is over two times as much as the cost of Simpson units with Simpson branding. Therefore, when you purchase a Simpson, be aware that DeWalt’s beautiful yellow branding and label will increase the price of the same unit by a factor of two.