It can be quite tempting to simply turn the mower on its side to make cleaning the grass easier, but wow! not so fast. A clogged grass chute is a real pain in the jacksie. Both correct and incorrect methods can be used.
How should I tilt the lawnmower? When tipping a lawnmower, the carburetor side should always be facing upwards and the handlebars should be parallel to the ground.
In this brief post, I’ll demonstrate how to tilt your lawnmower over correctly and explain why it’s crucial to do so.
This article does a good job of explaining how to tilt your lawnmower; but, if you want video instructions, see “Correct method to tilt mower video” and, if your mower won’t start after being tilted wrongly, watch “How to unflood a mower engine video.”
In This Article...
How should a Honda lawnmower be tilted?
99% of the time while I’m performing maintenance, I like to tilt my lawn mower on its side. However, you must be careful which side you tilt it on (you knew there would be one).
The wrong way to tilt it can result in bad consequences. Finding the side of your mower that houses your air filter and carburetor is crucial in this situation. I’m unable to specify if it’s on the right or left side because this will depend on the particular mower. However, they are typically quite clear and easy to spot.
This side (the one with the air filter and carb) needs to be facing up when you tilt your mower up. That is extremely crucial. Oil will leak from the breather tube between the crankcase and the air box if the carb is pointed downward, and you’ll end up with oil all over the place.
What occurs if the lawnmower is tipped incorrectly?
There are likely a few issues you will need to deal with if you find yourself in a circumstance similar to the one we just discussed.
Change Your Air Filter
You can’t leave your air filter in place if it is entirely covered in oil. The appropriate volume of air must travel through the filter in your mower’s engine for the fuel and air to burn together. That can’t happen with an oil-soaked filter; it will choke your engine and cause your mower to either sputter and struggle to maintain constant power or not start at all. Additionally, your mower may start up before cutting out or blowing black smoke (quite a frightening sight!).
The issue has an easy fix. Replace your air filter. To prevent leftover oil from getting into the new filter, make sure you also clean all oil residue from the case/cover.
Clean the Carburettor
It may be that oil is obstructing or partially blocking the carburetor if you’ve changed the filter yet your mower won’t start or isn’t operating smoothly. It needs to be cleaned as thoroughly as you can.
Spraying carburetor cleaner into the carburetor’s throat is the first thing I’d do because it’s far less time-consuming and difficult, and then I’d try to start the lawnmower. Any remaining oil might be removed if you can get the engine to start.
If that doesn’t work, you’ll need to take the carburetor apart and thoroughly clean it, but I wouldn’t try this unless you’re confident with this kind of situation. If not, I’d advise you to locate a nearby repair facility and ask them to take a look.
Remove Spark Plug and Clean
You should take out your spark plug and clean it if your mower won’t start because the combustion chamber flooded. You ought to be good to go after waiting a little while before rejoining.
How can you tell if a mower blade is turned around?
If you don’t know what you’re doing, your chances of getting it right are 50/50. These are not poor odds, however. But there are a few very straightforward techniques you may employ to always get it properly. Even though I’m not much of a gambler, a 100% probability of winning sounds appealing.
Here are some of my go-to methods for determining which side a lawn mower blade attaches:
It’s Stamped on Your Blade
One of those may be these “moments of duhhh Many mower blades feature something similar “Grass Side is indelibly engraved on the blade. Check to check if your blade fits this description. If so, you’ve just struck gold because you are certain of which side is up. There are several techniques to determine which side of the lawn mower blade is up even if there is nothing stamped on the metal.
Sharp Side of Your Blade Closest to Ground
You’ll see that your blade has a cutting edge on one side and a dull side if you look at it. Typically, the raised edge on the blunt side will resemble wings. What is this raised edge? “lifts your clippings into the deck’s air vacuum once they have been cut, allowing you to direct them into your grass catcher or out the discharge chute. So, when mounting your blade, you must ensure that this “The sharp side of the blade is the side that is closest to the grass, and the wings are pointing upwards towards the underside of your deck.
Sharp Side of the Blade Moves Towards You
There is a short test you can perform after attaching the blade and tightening the bolt on your tipped-over mower to determine if you have an upside-down mower blade or not. Move the mower’s blade toward you while it is turned on its side; the blade’s direction will depend on whether the mower is turned to the right or left. The blade should be rotated clockwise if it is on the right side and counterclockwise if it is on the left.) When doing this, the leading edge should be the blade’s sharp edge. If it does, your lawn mower’s blades are positioned correctly. If not, you must turn it around.
Can you work on a riding lawnmower by turning it on its side?
You want to inspect your zero-turn or lawn tractor’s undercarriage, then. You might believe that finding the ideal approach to tip the mower off its upright position is necessary in order to accomplish this. Although you can tip one, should you?
It is feasible to tip a riding lawnmower onto its side, but you must be extremely careful when doing so and which side you flip it onto. You must locate the carburetor before you turn the mower on its side. To be clear, it is not ideal or advised to tip a riding lawn mower over.
Let’s examine both sides of the issue at hand. Mowers, especially sophisticated ones like almost any riding mower, could and should be tipped.
Why does my lawn mower emit white smoke?
Q: Recently, when I turned on my mower, I immediately shut it off since it began to emit smoke. What causes my lawn mower to smoke? Does it pose a fire risk? I need to know what to do to avoid damaging the machine.
A: There are a variety of causes for your lawn mower to smoke, many of which don’t call for professional assistance. By judging the color of the cloud emanating from the engine, a homeowner can typically determine the cause of a burning lawn mower and make the necessary repairs before any long-term harm is done. Remember that while all lawn mowers powered by internal combustion engines have the same basic components, the placement of those components varies greatly depending on the manufacturer and model. If you’re unsure of how to access a certain component of your lawn mower’s engine, consult your owner’s manual.
White or blue smoke may indicate an oil spill on the engine.
It’s conceivable that some oil from your freshly changed mower’s oil leaked into the engine if the engine is producing white or blue smoke. Similar to how mowing on a slope steeper than 15 degrees or turning the mower onto its side could have caused oil to leak over the engine. Although the smoke may appear unsettling, it is perfectly safe. Restart the mower to fix the issue and give the oil a chance to burn out. Check your owner’s manual to learn how to minimize the chance of oil leaks if you frequently tip the mower for cleaning or repair.
What occurs if you turn your lawnmower on its side?
My lawn mower won’t start after I changed the blade, or “My lawn mower won’t start after I tipped it over.”
Mowers frequently stop operating when people tip them to change out the blades or perform other types of maintenance.
There are typically three reasons why that occurs:
Possible cause 1: In some models, fuel can leak into the carbon in the cap when you tip the mower, which hinders the fuel system’s ability to vent. This may result in the engine not starting or just running for a short time before cutting out.
Possible reason number two: The breather tube that connects to the carburetor has oil inside of it. Oil may then seep into the air filter, creating a restriction that prevents the mower from starting or causes it to burn fuel too richly. This is probably the reason if the mower’s exhaust is emitting black smoke.
Thirdly, the carburetor’s fuel tank may leak, flooding the engine and preventing it from starting.
How to stop this from taking place again:
Read your lawn mower’s owner’s manual for instructions on how to tilt or reposition it for maintenance before beginning any type of repair.
What happens if lawn mower blades are overtightened?
Unfortunately, if you’re not careful, you could overtighten the blade on your lawnmower. In rare circumstances, this might even harm the blade directly. If it’s too tight, the blade can potentially break when it strikes a hard object.
In addition, the bolt holding the blade in place may suffer damage.
If you exert too much force, the bolt’s head may break off completely. You already know how difficult it is to remove a broken bolt if you’ve ever had to.
It’s crucial to remember that just because a bolt doesn’t break doesn’t mean it wasn’t overtightened. With excessive force, you could even break or distort the washer. Additionally, don’t forget that every time you overtighten the bolt, a small portion of its threads are lost. You won’t be able to tighten it at all if you carry on doing that.
As you can see, overtightening the blade on your lawn mower can result in a lot of problems.
Which takes me to my following point: