Do this now!
- To release the parking brake.
- The wheels that will remain on the ground should be secured with wheel chocks.
- Find your jack point, then jack up the vehicle.
- Put your jack stand in the appropriate spots underneath the automobile.
- As closely as you can, lift or screw the support beam up to the contact point.
- Ensure that the jack stand is seated correctly.
- Lower the automobile onto the stand while gradually releasing the jack.
- To ensure stability and to fully secure the automobile into the stand, give it a firm but controlled shake.
- Put weight back onto the jack and raise it to the same level as the stand.
- For the other sides, repeat.
- Lift the vehicle off the jack stand.
- Lower the support beam by pulling the jack release.
- Take the jack stand off.
- Drop the automobile.
- Taking off the wheel chocks
- Done!
In This Article...
How are the front wheels jacked up?
Under the jack point that is placed close to the front tire, place a jack stand. Downshift the automobile. On the opposite side, repeat. Right now, you have both of the front wheels raised (on jack stands) and both of the rear wheels down.
Before jacking up the automobile, should I loosen the lug nuts?
Although changing a flat tire isn’t difficult, there are a few things you should know to ensure that the spare tire is installed correctly so that you can go to the tire shop without incident. Watch this Les Schwab Quick Tips video to learn how to do it by following along as we walk you through each step. We discuss:
- What to do before pulling out the tools.
- how to locate your car’s ideal jacking point.
- how much lug nuts should be loosened before lifting the automobile.
- how to properly install the spare tire.
- the right way to tighten lug nuts.
How to Change a Tire
- security first. Maintain a safe distance from oncoming traffic, put your car in park, engage the parking brake, and turn on your warning lights. It is preferable to ask for roadside help if you are unsure that you can avoid danger.
- Consult the owner’s manual. It should have directions for changing tires, including where the jacking point is.
- Bring out your spares and tools. Typically, they are kept in a compartment in the trunk. The jack should provide usage instructions as well.
- Make sure the jack is set up correctly. Ensure it is positioned correctly in the vehicle’s jacking point and is facing the right direction.
- Before jacking, loosen lug nuts by roughly a quarter turn.
- The car should be jacked up high enough so that the tire is off the ground.
- The lug nuts should be taken off and placed so they won’t roll away.
- Pull the flat tire off and place it behind the jack underneath your car, or if it’s too broad, try another position under the car. This is crucial in the event that the car slips off the jack.
- Make sure the valve stem is facing you as you install the spare.
- Hand-tighten the lug nuts while reinstalling them.
- Once the tire is in touch with the ground and partially loaded, lower the jack.
- To ensure that the wheel is properly installed, tighten the lug nuts in a star pattern rather than a circle pattern. This ensures that the wheel is straight and won’t pop into place while you’re driving, allowing some of the bolts to become loose and the vehicle to wobble, or worse, the nuts to break and the wheel to come off.
- The car should now be lowered all the way. You’re prepared to make a cautious trip to the nearest tire shop to get your regular tire changed or repaired.
Spares should only be driven for brief distances and at low speeds. Your spare tire’s speed rating can be lower than that of your primary tires. Have a tire specialist inspect your spare at the shop so that it is in working order for the next time you need it.
How do I lift my automobile to change the oil?
Place jack stands first in the front, then jack up the back and do the same at the back. Don’t hold the car up with a jack! You shouldn’t start changing your oil until you’re sure the car is securely parked on stands. When the vehicle is in the air, avoid leaning on it or entering the engine compartment.
Can you raise the oil change on one side?
Simply raise the front. The pan will drain much better because the drain plug is in the back of the pan. The oil tank and lines are drained by the front drain plug, who could care less how the car is jacked up. You only need to jack up one side, however it can be difficult to reach the oil filter below the car.
How long can an automobile be raised and lowered?
After employing a hydraulic lift or jack lift, a heavy object can be supported by a jack stand. In order to replace a wheel, change the oil, or inspect any other component underneath a car while working on it, you would use a jack stand. We have enquired as to the maximum amount of time a car can be supported by jack stands. Here is what they gave us.
A car can be left on jack stands for however long is necessary. For days, weeks, months, or even years, your car could be left on jack stands. As long as your car is jacked on a flat surface, everything will be OK. One thing to keep in mind is that it’s preferable to put your car on concrete rather than asphalt because asphalt is softer and your jack stands risk leaving a mark if left there for an extended period of time.
Since your tires will gradually lose air if you leave your car standing on its own and you run the risk of damaging your rim, leaving it on jack stands is a smart way to store your automobile. Additionally, check the vehicle’s security to ensure that even a small bump won’t cause it to overturn. Continue reading for more details about jack stands.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Are jack stands secure enough to work on?
Place your axle stands once you’ve raised the automobile to the proper height. Despite their name, they don’t need to be positioned beneath the axles; instead, they should be situated beneath a sturdy object that can support the weight of the automobile, like the jacking points.
Once in place, elevate the stands to the proper height, making that the locking pin or lever is in the proper location. Next, slowly drop the jack until the car is resting on the stand or stands.
To be safe, you can leave the jack there, but watch out that it doesn’t cause any unbalance with the car or interfere with the stands.
Give the vehicle a solid nudge before entering the vehicle.
If it moves, you must mount the stands in a different location.
It’s always a good idea to place the wheels beneath the car as an added measure of safety if you remove them while working underneath the automobile.
Do jack Stands need to be used?
Every garage or workshop needs jacks. They are effective equipment that makes carrying heavy objects look easy. However, users routinely overlook fundamental safety precautions due to how dependable modern jacks have become. They believe that nothing can go wrong and that utilizing a jack stand, for example, is a simple task that is a waste of time. That is the furthest thing from the truth.
Jack stands are a crucial component of lifting a vehicle. Jacks are intended to elevate a weight rather than support it. They lift using hydraulics, and if under constant pressure or poorly maintained, they are prone to failure. One blown seal is all it takes for the entire system to lose pressure, which lowers the load. The notion that it’s safe to leave a large truck on a jack for a long time without consequences is dangerous and could cost the user their life. In contrast, jack stands are designed specifically to carry static loads steadily while undergoing routine maintenance.
Users who neglect to use jack stands run the danger of suffering both financial and physical harm. Efficiency is the most frequent excuse cited for not using jack stands. They claim that properly setting a load on a stand is a waste of time (and, consequently, money). However, any perceived savings would be quickly offset by the expense of damage brought on just one car colliding with the ground, or worse, by a workplace injury. In fact, numerous fatalities that are blatantly related to not using jack stands are documented each year.
While it could initially seem ineffective or even uncomfortable, it’s crucial to keep in mind that jack stands are just as crucial as the jacks themselves. Your jack may fail at any time, even though it hasn’t done so previously. Always read the user manuals before using any of your equipment, and abide by all workplace safety regulations.
How is a 2016 Honda Accord’s tire removed?
WARNING! Anyone underneath the car may be gravely injured if it were to slide off the jack. Follow the tire-changing instructions to the letter, and avoid getting beneath the car when it is only being supported by the jack.
Step 1: Position the jack beneath the jacking point that is closest to the tire that needs to be changed.
Step 2: Rotate the end bracket in the direction of the arrow (clockwise) until the top of the jack touches the jacking point. Verify that the jack notch is receiving the jacking point tab.
Step 3: Jack up the car until the tire is off the ground by using the jack handle bar and the jack handle.
CAUTION! Use the jack without passengers or cargo inside the car. Utilize the jack that came with your car. Other jacks might not fit the jacking point or be able to support the weight (the “load”). For safe jack use, please adhere to the guidelines below:
- Never enter the car while the jack is being used.
- Use just where the surface is flat and hard.
- Never position anything above or below the jack.
- Only use at the jacking points.
- When the engine is running, do not use.
The 2019 Honda Civic’s jack points can be found where?
seasoned member I’m not sure about the front, but the back of the car has a jacking point in the middle, just inside the lower edge of the rear bumper. It is fastened to the gas tank’s back.
Is a jack included with a 2020 Civic?
seasoned member Nope. No jack. I purchased the Honda spare tire package, which includes all the tools required to fix a flat tire.
On a Honda Accord, how do you replace a tire?
How to Replace Honda Tires Place wheel wedges beneath the other tires and engage the parking brake. After removing the hubcap or wheel cover from the tire, release the lug nuts. Lift your car using the jack, then take out the lug nuts. Install the new or spare tire after removing the old one.