Honda ATVs come equipped with a Vehicle Identification Number (VIN), which can be used to track an ATV’s history all the way back to the factory and even to the precise moment it left the assembly line. The year of manufacturing, make, and engine type are also included in the VIN, along with a check digit in the center to avoid vehicle identity fraud.
In This Article...
Items you will need
Locate the ATV’s VIN number. This is typically installed on the frame close to the bottom. It has 17 digits in total.
Take a look at the first three numbers. These stand for the WMI, or World Manufacturer’s Identifier.
The nation of origin is indicated by the first digit. If the first digit is a 1, the ATV was made in the United States. If it begins with a J, your Honda was manufactured in Japan.
Honda’s second digit will be an H. The vehicle type or production division is represented by the third digit. This may be an M, for example, for the motorcycle division, or a 3 or 5, for example, for an all-terrain vehicle.
Use the group of the following five integers (four through eight). The Vehicle Description Section of these numbers contains information about the ATV, including its series, model, and engine type.
Track down the ninth digit. Consider this number alone. It can be linked back to the ATV by the manufacturer and has been assigned to guard against fraudulent vehicle identification.
Verify that the 10th digit corresponds to the manufacture year. Before 2000, it was a letter; starting in 2000, it is a number. The letter W, for instance, will be at the tenth place on a 1998 model.
Using the 11th digit, identify the factory where the ATV was produced. A stands for the Ohio factory in the United States, B for the Aalstd factory in Belgium, C for the Saitama factory in Japan, D for Guadalajara in Mexico, E for Montesa in Spain, F for Atessa in Italy, K for Kumamoto in Japan, M for Hamamatsu in Japan, R for Manaus in Brazil, S for Suzuka in Japan, T for the Japanese Tochigi plant, and 4 for the South Carolina factory in the United States
To view the ATV’s special production sequence, use the last six digits. This can be used to recall products if only some of the production was impacted by a problem and can show you when your ATV rolled off the assembly line.
Where is the four-VIN wheeler’s located?
The front of the ATV frame has a stamp with the frame/VIN number, as seen in the picture. On the right side of the engine casing is where you may see the engine’s serial number.
Do four-wheelers have VINs?
The 17-digit VIN serves as a code or ID for a particular vehicle. ATVs and vehicles both use the same code. It depends on the manufacturer, but generally speaking, the VIN is imbedded on the frame, on the left side of the ATV, underneath the shifter, in an open area.
Honda
For Honda ATVs, the VIN is typically incorporated into the front crossmember, which is typically constructed behind the front rack. If you are utilizing bespoke skid plates, though, you might not be able to see it clearly. But you can rapidly unwind it to reveal the VIN.
The VIN is situated on the crossmember constructed at the front of the Honda Rancher ATV.
Kawasaki
On the left side of the frame, underneath the engine, is where the Kawasaki AVN’s VIN is permanently affixed. However, if your nerf plates are fastened, you can have trouble seeing the VIN. Be careful when searching for the VIN because it is simple to confuse it with the engine number even though they are two distinct things.
How can you determine a four-year wheeler’s using its VIN number?
The car model-year is indicated by the tenth character of the 17-character VIN. Vehicles manufactured in 1981 or after must comply with this specification.
What occurs when you purchase a stolen quad?
ATVs are unfortunately fairly easy to steal, which is a sad fact. They can be readily loaded into the back of a truck or trailer and transported away, unlike cars which are constantly visible to the public and are the subject of police searches. This is unpleasant not just for the original owner, but also for the unwary buyer. If you find yourself in possession of a stolen ATV, it will probably be recovered by the authorities and given back to its rightful owner unless you are ready to conceal the stolen item, which you shouldn’t do.
Look for the ATV VIN
A unique identifier used to identify each individual motor vehicle, including all-terrain vehicles, is known as the VIN (also called three-wheeler, quadricycle, quad, four-wheeler or four-track). The letters O (o), I I and Q (q), which can be confused with the numbers 0, 1, and 9, are not part of this 17-character VIN. All ATV manufacturers adhere to a uniform format.
- The engine size, engine type, and engine model are represented by the fourth through eighth characters.
- The manufacturer appears as the second digit.
- The country code appears as the first character.
- The tenth digit represents the year.
- One of the manufacturing codes is 11.
- A verification of the accuracy of the previous characters’ manufacturer authorization is provided by the ninth digit.
- The serial number is represented by the 12th through 17th characters.
- The third character serves as a vehicle identification code.
Where to find the ATV VIN number
ATV locations differ depending on the manufacturer. It is frequently (though not always) found under the shifter on the left side of the frame, which is a rather simple place to look. Perhaps this explains why ATV builders frequent the area. Other places might not be as simple to find:
- close to the left wheel (inside the left wheel well by the radiator or behind the left wheel well on the frame)
- through the plastic hood’s slit
- In the frame beneath the tail portion, engraved
- the frame’s left side, next to the engine
The most popular manufacturers’ typical VIN positions are shown below (in no particular order):
embedded on the front crossmember, which is located in front of the rack. (Unless you are utilizing special skid plates, it should be simple to find.)
Near the front of the car, typically on the left side under the shift lever.
It is located on the front left wheel well on more models. Additionally, the left or right rear frame may contain it.
Usually written on a label found inside the passenger-side front wheel well or under the glove box.
The VIN is also listed in the following documents:
- Names of vehicles
- registrations for vehicles
- dealer’s original bill of sale
- insurance documentation
Where on a four-wheeler can you find the year?
Note: In order to avoid confusion with other numbers or letters that look similar, VINs do not contain the letters I I O (o), Q (q), U (u), or Z (z), nor does the number 0.
Check out the eleventh digit. The ATV was manufactured in the year indicated by this digit. A=1980, B=1981, Y=2000, 1=2001, 9=2009, and A=2010, for instance. The codes of the other digits in the VIN allow you to determine the year the ATV was manufactured even though this letter or number (the “A,” for instance) can repeat.
WMI
The nation of origin or ultimate processing facility is indicated by the first digit of the VIN number. For instance, the numerals 1, 4, and 5 denote the United States, whereas 2 denotes Canada and 3 denotes Mexico. WMI ratings are given to nations and companies by the Society of Automotive Engineers. The manufacturer’s identifying digit follows, such as “G” for General Motors, “C” for Chrysler, and “B” for BMW.
The type of vehicle, such as whether it is a truck, SUV, or automobile, may be determined by the third digit when coupled with the first two. A Chevrolet truck’s VIN, for instance, would begin with “1GC.” G for General Motors, C for Truck, and 1 for the US, the nation of origin
Vehicle Identification Section (VIS)
Model year is the tenth digit. Years can be quickly determined using the table below. Therefore, if the 10th digit is a “D,” the car is a 2013 model.
What number of digits make up a VIN?
All road cars had to have standardized VINs by 1954, when the National Highway Traffic Safety Administration (NHTSA) started enforcing them.
The majority of people think that a VIN is just a collection of random letters and numbers. However, these symbols are highly structured codes with distinct meanings. The VIN, which consists of 17 characters, is used on vehicles manufactured from 1981 to the present (letters and numbers). The length and format of the previous VIN differed between automobiles.
The lower-left corner of the dashboard, in front of the steering wheel, is frequently where the VIN can be found. Looking through the glass on the car’s driver’s side will allow you to read the number.
The VIN may also be visible in the following places:
- wheels towards the back. Attempt to stare directly above the tire, up.
- The area in front of the car’s frame, close to the reservoir housing the windshield washer fluid.
- in the doorjamb on the driver’s side. Look underneath the door, where the side-view mirror would be if the door were closed.
- The engine block’s front. By opening the hood and inspecting the front of the engine, you should be able to see this with ease.
- the spare tire’s base.
- passenger-side doorpost. Look close to the location where the door latches and a little distance from the seatbelt return when you open the door.
The country where the car was made is indicated by the first character of the VIN. VINs with the first three digits 1, 4, and 5 are produced in this country. The third number or letter is used by the car maker to specify the type of car, truck, bus, etc. that is being manufactured. The model year is indicated by the 10th character of the VIN.