The location of the VIN stamp depends on the car model. The VIN is typically found either in the front left wheel well or the back left lower frame rail of ATVs manufactured from model year 2011 onward.
In This Article...
How can I determine the year of my Honda ATV?
Honda ATVs come equipped with a Vehicle Identification Number (VIN), which can be used to track an ATV’s history all the way back to the factory and even to the precise moment it left the assembly line. The year of manufacturing, make, and engine type are also included in the VIN, along with a check digit in the center to avoid vehicle identity fraud.
Items you will need
Locate the ATV’s VIN number. This is typically installed on the frame close to the bottom. It has 17 digits in total.
Take a look at the first three numbers. These stand for the WMI, or World Manufacturer’s Identifier.
The nation of origin is indicated by the first digit. If the first digit is a 1, the ATV was made in the United States. If it begins with a J, your Honda was manufactured in Japan.
Honda’s second digit will be an H. The vehicle type or production division is represented by the third digit. This may be an M, for example, for the motorcycle division, or a 3 or 5, for example, for an all-terrain vehicle.
Use the group of the following five integers (four through eight). The Vehicle Description Section of these numbers contains information on the ATV, including its series, model, and engine type.
Track down the ninth digit. Consider this number alone. It can be linked back to the ATV by the manufacturer and has been assigned to guard against fraudulent vehicle identification.
Verify that the 10th digit corresponds to the manufacture year. Before 2000, it was a letter; starting in 2000, it is a number. The letter W, for instance, will be at the tenth place on a 1998 model.
Using the 11th digit, identify the factory where the ATV was produced. A stands for the Ohio factory in the United States, B for the Aalstd factory in Belgium, C for the Saitama factory in Japan, D for Guadalajara in Mexico, E for Montesa in Spain, F for Atessa in Italy, K for Kumamoto in Japan, M for Hamamatsu in Japan, R for Manaus in Brazil, S for Suzuka in Japan, T for the Japanese Tochigi plant, and 4 for the South Carolina factory in the United States
To view the ATV’s special production sequence, use the last six digits. This can be used to recall products if only some of the production was impacted by a problem and can show you when your ATV rolled off the assembly line.
ATV VIN: How many numbers are there?
The 17-digit VIN serves as a code or ID for a particular vehicle. ATVs and vehicles both use the same code. It depends on the manufacturer, but generally speaking, the VIN is imbedded on the frame, on the left side of the ATV, underneath the shifter, in an open area.
Honda
For Honda ATVs, the VIN is typically incorporated into the front crossmember, which is typically constructed behind the front rack. If you are utilizing bespoke skid plates, though, you might not be able to see it clearly. But you can rapidly unwind it to reveal the VIN.
The VIN is situated on the crossmember constructed at the front of the Honda Rancher ATV.
Kawasaki
On the left side of the frame, underneath the engine, is where the Kawasaki AVN’s VIN is permanently affixed. However, if your nerf plates are fastened, you can have trouble seeing the VIN. Be careful when searching for the VIN because it is simple to confuse it with the engine number even though they are two distinct things.
When was fuel injection introduced on the Honda Foreman?
Throughout its run in production, the Honda Foreman 400’s configuration remained unaltered, although it saw a number of improvements, including the following:
- Both total length (from 76.5 to 77.2 inches) and height (from 42.5 to 45 inches) increased.
- The 1998 Honda Foreman 400’s engine displacement went from 395 to 432.6 cubic centimeters, a little increase.
- With a revised dry weight of 573.3 lbs, the Foreman has gained weight as a result of minor dimensional adjustments.
- Foreman models have access to EPS (Electronic Power Steering), TraxLok, and PGM-FI (Programmed Fuel Injection) from 1998 to 2004.
- The speedometer on the dashboard was replaced by a complete LCD that displayed the trip meter, the odometer, and the speedometer.
- On the 1995 model, the Goodyear Tracker ATT stock tires were replaced with Dunlops.
- Additionally, the seat height rose by 3 inches, from 30.9 to 33.9.
- From 4.33 to 5.9 inches more suspension travel was added at the front and rear.
What’s the weight of a Honda Foreman 450?
- Suspension Independent double-wishbone front suspension with vertical upper and lower control arms that increase the negative. 5.9 inches of travel are permitted, and it increases stability and ensures constant wheel alignment. The 5.9 inches of travel provided by the two shock absorbers in the rear suspension, which includes a swing arm and a steel finish, makes it ideal for hauling or hard work.
- Engine
- It is propelled by a four-stroke, air-cooled, longitudinally mounted single-cylinder OHV engine, which helps to minimize overall weight. It features a 68 millimeter stroke and a 90 millimeter bore. A Keihin carburetor powers the 433 cubic centimeter engine, which has an 8:5:1 compression ratio. The fuel tank can hold 3.2 gallons/12.1 liters of fuel.
- BrakesThe rear brakes are single-sealed mechanical drums, while the front brakes are dual-sealed hydraulic drum brakes. The Complete Front Brake Fix Kit (see on Amazon) has everything you need, including grooved brake shoes, wheel cylinders, and hardware, should you need to rebuild your front brakes.
- Electronic Capacitor Discharge Ignition (CDI) with a pull starter method is used for ignition.
- Dimensions
- It measures 45.3 inches in breadth and 77.28 inches in total length. It has a ground clearance of 7.7 inches and is 45 inches high off the ground. The seat is 33.6 inches high. The combined curb weight, passengers, and cargo can increase the GVWR from its dry weight of 595 lbs. to 1,102 lbs. Not to mention that its 11.5 foot turning radius offers for easy handling.
- Exterior
- Your quad can be left indoors, outside, or in the garage as long as it has a steel frame and a durable, lightweight, and hygienic plastic body. Additionally, it has full flooring, which are a terrific safety element. But you may purchase a Weatherproof ATV Cover if you wish to further shield it from the sun, snow, and debris (view on Amazon).
- Dunlop 25 X 8-12 tires are mounted on the front wheels; Dunlop 25 X 10-12 tires are mounted on the rear wheels. The wheelbase of the car is 50.2 inches.
- Lighting
- Multi-reflector lenses are used in all three lights—a 45-watt handlebar light, two lights installed on the front fenders—for better light dispersion.
- DrivetrainThis ATV has a five-speed transmission with an optional Electronic Shift Program (ESP), which makes it fun to ride and includes a reverse gear. Two handlebar-mounted buttons allow riders to shift with the simplicity of a push-button in place of a foot-shift lever.
- When necessary, the driver has the option to switch between lighter steering (2WD) and maximizing available traction (4WD) thanks to the TraxLokTM revolutionary mechanical system.
What occurs when you purchase a stolen quad?
ATVs are unfortunately fairly easy to steal, which is a sad fact. They can be readily loaded into the back of a truck or trailer and transported away, unlike cars which are constantly visible to the public and are the subject of police searches. This is unpleasant not just for the original owner, but also for the unwary buyer. If you find yourself in possession of a stolen ATV, it will probably be recovered by the authorities and given back to its rightful owner unless you are ready to conceal the stolen item, which you shouldn’t do.
How is the 13-digit VIN number located?
The 13 to 17 digit number that the manufacturer issues to each unique car is known as the Vehicle Identification Number (VIN). A car’s country of manufacture, engine size, model year, and trim level can all be learned by decoding the VIN. Usually, a plate located on the dashboard near the windshield or on the driver-side door jamb has the VIN stamped into it. It is also embossed on the firewall of the engine.
The VIN number has how many digits?
All road cars had to have standardized VINs by 1954, when the National Highway Traffic Safety Administration (NHTSA) started enforcing them.
The majority of people think that a VIN is just a collection of random letters and numbers. However, these symbols are highly structured codes with distinct meanings. The VIN, which consists of 17 characters, is used on vehicles manufactured from 1981 to the present (letters and numbers). The length and format of the previous VIN differed between automobiles.
The lower-left corner of the dashboard, in front of the steering wheel, is frequently where the VIN can be found. Looking through the glass on the car’s driver’s side will allow you to read the number.
The VIN may also be visible in the following places:
- The engine block’s front. By opening the hood and inspecting the front of the engine, you should be able to see this with ease.
- passenger-side doorpost. Look close to the location where the door latches and a little distance from the seatbelt return when you open the door.
- the spare tire’s base.
- The area in front of the car’s frame, close to the reservoir housing the windshield washer fluid.
- in the doorjamb on the driver’s side. Look underneath the door, where the side-view mirror would be if the door were closed.
- wheels towards the back. Attempt to stare directly above the tire, up.
The country where the car was made is indicated by the first character of the VIN. VINs with the first three digits 1, 4, and 5 are produced in this country. The third number or letter is used by the car maker to specify the type of car, truck, bus, etc. that is being manufactured. The model year is indicated by the 10th character of the VIN.