The location of the VIN stamp depends on the car model. The VIN is typically found either in the front left wheel well or the back left lower frame rail of ATVs manufactured from model year 2011 onward.
In This Article...
How can I determine the year of my Honda ATV?
Honda ATVs come equipped with a Vehicle Identification Number (VIN), which can be used to track an ATV’s history all the way back to the factory and even to the precise moment it left the assembly line. The year of manufacturing, make, and engine type are also included in the VIN, along with a check digit in the center to avoid vehicle identity fraud.
Items you will need
Locate the ATV’s VIN number. This is typically installed on the frame close to the bottom. It has 17 digits in total.
Take a look at the first three numbers. These stand for the WMI, or World Manufacturer’s Identifier.
The nation of origin is indicated by the first digit. If the first digit is a 1, the ATV was made in the United States. If it begins with a J, your Honda was manufactured in Japan.
Honda’s second digit will be an H. The vehicle type or production division is represented by the third digit. This may be an M, for example, for the motorcycle division, or a 3 or 5, for example, for an all-terrain vehicle.
Use the group of the following five integers (four through eight). The Vehicle Description Section of these numbers contains information on the ATV, including its series, model, and engine type.
Track down the ninth digit. Consider this number alone. It can be linked back to the ATV by the manufacturer and has been assigned to guard against fraudulent vehicle identification.
Verify that the 10th digit corresponds to the manufacture year. Before 2000, it was a letter; starting in 2000, it is a number. The letter W, for instance, will be at the tenth place on a 1998 model.
Using the 11th digit, identify the factory where the ATV was produced. A stands for the Ohio factory in the United States, B for the Aalstd factory in Belgium, C for the Saitama factory in Japan, D for Guadalajara in Mexico, E for Montesa in Spain, F for Atessa in Italy, K for Kumamoto in Japan, M for Hamamatsu in Japan, R for Manaus in Brazil, S for Suzuka in Japan, T for the Japanese Tochigi plant, and 4 for the South Carolina factory in the United States
To view the ATV’s special production sequence, use the last six digits. This can be used to recall products if only some of the production was impacted by a problem and can show you when your ATV rolled off the assembly line.
When was the Honda Foreman 500 manufactured?
High-performance all-terrain vehicle the Honda Foreman 500 was released in 2005. Its air-cooled, longitudinally mounted, OHV 500-class engine had a completely distinct driveline design from its smaller-displacement siblings.
It was longer than the Honda Foreman 450 and featured a wider front and rear track. Because of the 15% increase in power and the throttle position sensor, it also revved more smoothly than its predecessor. In addition, the Honda Foreman 500 featured an improved clutch that could manage the higher power output and the ease of electric starting.
Look for the ATV VIN
A unique identifier used to identify each individual motor vehicle, including all-terrain vehicles, is known as the VIN (also called three-wheeler, quadricycle, quad, four-wheeler or four-track). The letters O (o), I I and Q (q), which can be confused with the numbers 0, 1, and 9, are not part of this 17-character VIN. All ATV manufacturers adhere to a uniform format.
- The serial number is represented by the 12th through 17th characters.
- The tenth digit represents the year.
- The third character serves as a vehicle identification code.
- The country code appears as the first character.
- One of the manufacturing codes is 11.
- A verification of the accuracy of the previous characters’ manufacturer authorization is provided by the ninth digit.
- The manufacturer appears as the second digit.
- The engine size, engine type, and engine model are represented by the fourth through eighth characters.
Where to find the ATV VIN number
ATV locations differ depending on the manufacturer. It is frequently (though not always) found under the shifter on the left side of the frame, which is a rather simple place to look. Perhaps this explains why ATV builders frequent the area. Other places might not be as simple to find:
- through the plastic hood’s slit
- close to the left wheel (inside the left wheel well by the radiator or behind the left wheel well on the frame)
- the frame’s left side, next to the engine
- In the frame beneath the tail portion, engraved
The most popular manufacturers’ typical VIN positions are shown below (in no particular order):
embedded on the front crossmember, which is located in front of the rack. (Unless you are utilizing special skid plates, it should be simple to find.)
Near the front of the car, typically on the left side under the shift lever.
It is located on the front left wheel well on more models. Additionally, the left or right rear frame may contain it.
Usually written on a label found inside the passenger-side front wheel well or under the glove box.
The VIN is also listed in the following documents:
- Names of vehicles
- insurance documentation
- dealer’s original bill of sale
- registrations for vehicles
What occurs when you purchase a stolen quad?
ATVs are unfortunately fairly easy to steal, which is a sad fact. They can be readily loaded into the back of a truck or trailer and transported away, unlike cars which are constantly visible to the public and are the subject of police searches. This is unpleasant not just for the original owner, but also for the unwary buyer. If you find yourself in possession of a stolen ATV, it will probably be recovered by the authorities and given back to its rightful owner unless you are ready to conceal the stolen item, which you shouldn’t do.
Which Honda four-wheeler is the best one ever produced?
The Top Ten Honda ATVs Ever Built
- 1967 The Dream Group.
- The 1970 ATC 90 is No.
- beginning of an industry.
- The 1982 ATC200EMeet Big Red is number 2.
- No.3
- The first Honda four-wheeler was the 1984 TRX200.
- No.4
- the FourTrax 300 44Sales leader from 1988.
- No. 5: The FourTrax Foreman 44Job site manager from 1987.
Can I check the VIN to determine if it was stolen?
The public can use NICB’s VINCheck, a free service, to help determine whether a car has been reported stolen but not found or has been reported as a salvage car by participating NICB member insurance companies. A vehicle identifying number (VIN) is necessary in order to do a search. A 24-hour period allows for a maximum of five searches per IP address.
How can I keep from purchasing a stolen ATV?
ATV riding is a thrilling and enjoyable hobby, but it is also highly expensive. This is the reason why there is a thriving used ATV industry in any region where they are prevalent. After all, who can resist a good deal? However, the risk of purchasing an ATV that is damaged or stolen is real, and the repercussions can be severe (at the very least it will be taken away if found by the police).
Naturally, purchasing a new ATV or doing business with a reputable dealer is the best method to avoid purchasing a stolen ATV. However, this choice is also the most expensive, and if you’re buying for a family, the prices add up quickly.
The Honda Foreman had fuel injection in what year?
Throughout its run in production, the Honda Foreman 400’s configuration remained unaltered, although it saw a number of improvements, including the following:
- Both total length (from 76.5 to 77.2 inches) and height (from 42.5 to 45 inches) increased.
- On the 1995 model, the Goodyear Tracker ATT stock tires were replaced with Dunlops.
- Additionally, the seat height rose by 3 inches, from 30.9 to 33.9.
- Foreman models have access to EPS (Electronic Power Steering), TraxLok, and PGM-FI (Programmed Fuel Injection) from 1998 to 2004.
- With a revised dry weight of 573.3 lbs, the Foreman has gained weight as a result of minor dimensional adjustments.
- The speedometer on the dashboard was replaced by a complete LCD that displayed the trip meter, the odometer, and the speedometer.
- The 1998 Honda Foreman 400’s engine displacement went from 395 to 432.6 cubic centimeters, a little increase.
- From 4.33 to 5.9 inches more suspension travel was added at the front and rear.
RACK CAPACITY
Sporty, durable steel racks are included on the Rubicon: The rear rack can take up to a massive 187 pounds, and the front rack can hold a whole 99 pounds. Additionally, multiple tie-down options make securing your loads simpler than ever.
MAKE IT YOURS
A complete array of Honda accessories that fit your new Rubicon are the result of our engineering. Winches, heated grips, car protection, and more are all included. Additionally, you can simply and without using any tools attach and detach accessories like our cargo boxes thanks to our new Honda Pro-ConnectTM line. Find out more here.