To remove the 17 mm hex oil drain plug from the back of the oil pan, which is facing the back of the vehicle, use a box end wrench. The wrench should only be turned about halfway.
Place an oil drain pan underneath the drain plug, then manually unplug it until oil starts to drain from the oil pan.
Search for sparkly flecks in the oil as it drains. Metal flakes in your oil may be a sign that your engine has a significant issue.
In This Article...
On a 2001 Honda Accord, how do you reset the maintenance needed light?
Maintenance Light Reset Instructions for the 2001 Honda Accord
- Cut the engine off.
- The SELECT/RESET button on the instrument panel should be pressed and held.
- When the indicator resets, hold the button down for at least 10 seconds.
- To make sure the indication has been reset, turn off the ignition and then start the vehicle.
Can I use 5w30 for 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.
Is 5W 20 oil suitable?
Since 5W-20 has a low viscosity, it is best suited for vehicles that travel frequently in colder climates and low temperatures. It can assist with engine deposits and wear and tear issues and is appropriate for light-duty gasoline and gasoline engines.
In addition to performing exceptionally well at low temperatures, 5W-20 oil also benefits:
- Better fuel economy is the result of its lower energy consumption, which also results in less exhaust pollutants.
- Because of its thinner oil viscosity, engine components like the crankshaft and pistons experience less friction and drag. As a result, there is a reduction in oil use and an increase in fuel economy.
- Since the oil flows more freely from the oil pan to the rest of the engine at low temperatures, it offers better start-up performance at those levels.
Although 5W-20 oil has several advantages, you should only use it when your mechanic and the manufacturer of your car recommend it. The performance of your engine might be seriously harmed by using the incorrect motor oil.
Let’s now examine some additional frequently asked questions and their responses regarding 5W-20 oil.
What volume of fuel can a 2002 Honda Accord hold?
oil that should be used in my 2002 Accord Filtered, 4.5 quarts Check the oil level after refueling. 4.2 quarts without a filter Check the oil level after refueling.
Should I check my Honda Accord’s oil when it’s hot or cold?
When the oil is warm, such as during a fuel stop, is the ideal time to check the engine oil level. Wait for the oil to return to the oil pan for about five minutes after turning off the engine. The dipstick should be removed, cleaned, and then fully reinserted.
What happens if I over-oil my car?
It will be easier to comprehend how using too much engine oil is a bad idea if you have some background information.
Oil is necessary for optimal lubrication and smooth movement in all of the hundreds of precisely engineered pieces that operate in concert at high speeds and temperatures. The “Oil under the hood” cap on an engine is used by you or your mechanic to add oil to the crankcase. When the engine is not running, the oil collects in the oil pan. An oil filter removes impurities that can potentially cause damage as the engine is started. The oil then flows throughout the engine.
The level in the oil pan rises when too much oil is applied. This enables the crankshaft, a rapidly moving lobed rod, to make touch with the oil and basically aerate it. A foamy, frothy fluid that is unable to adequately lubricate the engine is the end consequence. Imagine this as the process your engine uses to whip cream. Nobody wants their engine to be lubricated with whipped cream.
Another issue is that the additional oil puts too much pressure inside your engine, and that pressure will try to escape through various gaskets and seals. Leaks and expensive repairs will result if any of those fail.
How can I tell if the oil in my dipstick is low?
Push the dipstick all the way down into the tube while carefully inserting it. Now take it out and attentively inspect the tip; it should be covered in oil. Your car has enough oil if the oil level is between the two lines. It’s time to add a quart if it’s at or below the low mark.
What size washer is a Honda drain plug?
Drain plug Crush Washer 94109-14000 Every time you change the oil in your Honda or Acura car, it is advised to replace this 14mm crush washer on the Oil Drain Plug bolt! This stops those bothersome oil drops in the driveway that everyone hates.