These versions, the CB400F (2013–2016), CB400X, and CBR400R, are offered for sale in Japan with 399 cc engines of lower displacement. [1] New European licensing rules that established a mid-range class of motorbikes with low power also came into effect at the same time as their launch. [2] The new 500 twins are completely new, unlike the older CB500 parallel-twins that were withdrawn in 2003. They are produced in Thailand, a country where Honda had previously solely produced motorcycles with lesser displacements. [3]
The same 471 cc (28.7 cu in) 180 crank straight-twin engine, which is below the A2 European driving license limit in capacity and power, is used in all variants.
[4] The majority of the cycle elements are the same, as well as the six-speed gearbox. The CB500X is taller and has more ground clearance due to its larger fuel tank and extended front suspension travel.
The CBR500R was the sole model used in the 2013 and 2014 European Junior Cups at the time of its release. Since 2014, Honda has collaborated with local organizers to create national CBR500R Cup competitions in Brazil and France. The races, which take place on a variety of courses, are available to amateur riders aged 13 and older. [5] [6] [7]
In This Article...
Which motorbike brands are produced in Thailand?
Thailand is a significant hub for the production of motorcycles, ranking fifth in terms of production capacity (2 million units), after China (23 million units), India (20 million), Indonesia (8 million), and Vietnam (3 million).
Thailand encouraged the purchase of motorcycles with four-stroke engines rather than two-stroke ones at the start of the 1990s in order to decrease the problem with emissions. As a result, manufacturing increased and reached a capacity of 1.75 million units annually. Motorcycle sales, the first form of personal transportation, grew alongside the nation’s development.
The industry began to export and develop in accordance with the global demand in the years that followed, learning new technologies and adopting cutting-edge regulations for safety and emissions. At the same time, Free Trade Agreements (FTA) were being introduced, which led to the cancellation of industrial protection measures.
There are now 7 motorbike manufacturers in Thailand, and their combined annual manufacturing capacity is 3 million motorcycles. They are BMW, Triumph, Ducati, Yamaha, Suzuki, Kawasaki, and Honda. Because of their proximity to manufacturing hubs and seaports where such CBUs are exported, the majority of them are found in the Central and Eastern regions.
What country produces the Honda CBR650R?
Honda Motorcycle and Scooter India (HMSI) said on Friday that it has started shipping its newest middle-weight motorcycle, the CBR650R, from Honda BigWing in Gurugram.
The premium bike division of Honda Motorcycle and Scooter in India is called BigWing.
According to a press statement from Honda, the CBR650R replaces the CBR650F in the sporting middle-weight lineup and was unveiled at the 2018 Milan Motorcycle Show.
“We are pleased to start delivering to our booking customers and wish them a nice trip. The motorcycle has gotten positive feedback, and we are convinced that when everything is put together, it will give young, enthusiastic riders a new experience “the HMSI senior vice president for sales and marketing, Yadvinder Singh Guleria.
Customers all throughout the nation have responded extremely well to the model, which is priced at Rs 7.70 lakh (ex-showroom across India), according to the press statement.
What is the price of a 2022 Honda CB500X?
The Honda CB500X is an incredible value when it comes to entry-level adventure-style motorcycles, costing just $7,199. The bike is more comfortable on asphalt than in the dirt, but it can also easily handle gravel routes. Honda improved the fork, the braking system, and a few other chassis-related features for 2022.
What Honda models are produced in Thailand?
The Accord, CRV, City, Jazz, and Civic sedans are made for Australia at the Honda Automobile Thailand Co (HATC) factory in Ayutthaya, Thailand. We fly the Civic Hybrid, Accord Euro, Odyssey, and Legend out of Japan.
Honda motorcycles are produced there, right?
More than 200,000 Honda motorcycles are exported from China to the Middle East, Africa, and Japan. 2005 will see the addition of neighboring Asian nations to the destination. These motorcycles are constructed with components from many nations.
Where are KTM motorcycles manufactured?
The engine facility in Austria’s Munderfing, close to Mattighofen, is where each and every KTM gets its heart. Every day, close to 200 people labor here to create between 300 and 400 engines.
Where are bikes made by Yamaha made?
Asia is the region where most of the manufacturing facilities for the Yamaha Motor group are located. Each of these plants is outfitted with casting machinery that adhere to international standards and is built up with adaptable production layouts. Any of these Yamaha factories may make cast parts with the same high standards of quality by utilizing the same molds/dies, manufacturing processes, and alloys.
Can the CB500X travel off-road?
The Honda CB500X is capable of navigating several difficult terrains in 2022. Undoubtedly, if you want a dirt bike, you should purchase a dirt bike, but if you need a competent touring bike that can handle the rougher terrain required of extended road travels, the CB500X is a good option.
It helps that Honda makes their 500cc motorcycles simple to ride on purpose.
Brakes and the clutch don’t require a lot of force.
Let’s examine the specific factors that contribute to the Honda CB500X’s surprisingly impressive off-road performance.
The CB500X has a top weight.
The CB500X’s height isn’t much different, but because of its light weight and lack of a top-heavy feeling, I felt quite at home riding it. It was highly spirited on the road and seemed to have more than 47 horsepower at its disposal.
Where are Honda CR-V models built in Australia?
It serves as the center of the newest automotive empire in the world, one that sends an increasing number of vehicles, including Honda vehicles, to Australia. By the end of July, 96,603 Thai-built vehicles had been sold in Australia this year alone, up from 82,656 in 2009.
In 1998, Honda Australia became the first firm to import passenger automobiles from Thailand, but it took another 12 years for the Japanese manufacturer to feel confident enough in the quality of Thai-built goods to make a statement about them.
However, over 80% of Honda cars sold in Australia today are built in Thailand. The City, Jazz, Civic sedan, CR-V, and Accord are among them. The Accord Euro, Legend, and Odyssey are still produced in Japan, while the Civic hatch is built in the UK.
Not only Honda, but “more and more manufacturers are coming here to make automobiles,” according to business spokesman Mark Higgins. They consist of the majority of pick-up trucks marketed in Australia, the Mazda2, and – very soon – more small cars from Suzuki and Ford, led by the upcoming Fiesta.
With 778 automobiles, the Thai-Honda adventure officially began in 1998. Exports rose considerably to 14,071 in 2005 thanks to the Free Trade Agreement between Australia and Thailand and the relocation of jazz production from Japan to Bangkok.
Honda shipments from Thailand to Australia were 51,424 in 2007, however they sharply decreased amid the global financial crisis. They are anticipated to number 40,197 this year. However, that amount still represents a negligible part of the Thai Honda factory’s 240,000 yearly production capacity.
About 5000 Thai workers and 80 Japanese managers are employed at the plant, which has an area of 851,800 square meters. They work two to three shifts every day, receive two weeks of annual leave, and Honda pays for their food.
Although Thailand’s oppressively hot and humid heat is tempered in the body and frame plant by opening up a complete wall to prevailing winds rather than employing air conditioning in an effort to save electricity, working conditions are still not ideal.
Makoto Morii, vice-president of Honda Automotive Thailand Corporation, claims that the facility is only 50% automated, compared to Japanese plants that are 90% automated. “Because the pay is lower here, we use more hand welding. We can hire more people here rather of spending money on expensive machinery,” he says.
Additionally, he defends the degree of human participation and has high regard for his Thai employees. The level of mechanical proficiency among Thais and Japanese is comparable. He claims that compared to robots, people are more flexible.
He acknowledges, though, that complete automation will be necessary for the company to begin producing more complex hybrid vehicles. He acknowledges that we don’t have a plan for expanding the factory.
Why is Honda not well-liked in Australia?
The business noted that the decline in Honda’s sales for the second consecutive month was due to a combination of factors, including a limited supply of new cars due to the global semiconductor shortage that has crippled most automakers and sporadic lockdowns in various Australian cities.
VIN Number Breakdown
The World Manufacturer Identifier, Vehicle Descriptor Section, and Vehicle Identifier Section are the three groupings of the 17 numbers and letters (17 places) that make up a VIN. To enable you to decode any VIN number, we will go over each of the 17 locations here. You’ll master VIN decoding in no time!
Position 1
You can find out where in the globe your car was built by looking at the first letter or number of the VIN. To determine where in the globe your VIN was created, compare the letter or number below to the initial number or letter of your VIN.
Africa is where items A through H are manufactured. Asia is where J, K, L, M, N, P, and R are produced. Europe is where S, T, U, V, W, X, Y, and Z are produced. The first five are produced in North America. Oceania produced numbers 6 and 7. 8 and 9 were produced in South America.
Position 2
The second letter or number in the VIN, when combined with the first letter or number, identifies the nation where the car or truck was built. You might be astonished to learn that not all GM automobiles are built in America, and not all Japanese cars are made in Japan, etc. Anyway, there are over 600 VIN nation codes, and over 80 countries produce automobiles and trucks. Visit to examine all the codes and discover the factory that built your automobile or truck. What country built my car or truck?
Position 3
The car manufacturer specifies the type of vehicle by using the third number or letter. Any vehicle could be used—a car, truck, bus, etc. To learn what the third place in the VIN for your specific vehicle represents, visit the website of the automobile manufacturer for your model. Each vehicle manufacturer uses a distinct set of codes for this.
Which Honda continues to be produced in Japan?
Hybrid vehicles for the American market, including the Civic Hybrid, Insight, and FCX Clarity, are made in Japan. Except for the FCX Clarity, which is made only in Takanezawa, Japan, all of these vehicles and the Honda Fit series are made at the Honda production site in Suzuka, Mie.