A little gadget connected to the brake pedal mechanism is called a brake light switch. The brake light switch, despite its diminutive size, has a significant function in contemporary automobiles.
If a brake light switch is malfunctioning, many vehicle functions, such as Push-Button Start, Antilock Brakes, and Vehicle Stability Control, will not function.
There are two main purposes for the brake light switch. When a driver depresses the brake pedal, it first activates the brake lights. Second, it informs the car’s computer that the brakes are being used. Driving a car with a broken brake light switch is VERY RISKY.
The brake light switch is typically located just over the brake pedal. It has a one-way or two-way electric switch within. Brake lights that don’t turn on or that stay on all the time are the most typical signs of a broken brake light switch.
In This Article...
How can you tell if the brake light switch is malfunctioning?
Although brake light switches are made to last as long as your car, they could eventually get broken. If you experience any of these signs, think about changing the broken brake light switch:
Your Brake Lights Don’t Light Up
When you depress the brake pedal, your brake lights should illuminate to alert the driver in front of you.
The back brake lights won’t turn on if your brake switch isn’t working properly, which presents a serious safety risk because the vehicle behind you won’t be aware that you’re slowing down.
Now, this can mean that a brake light bulb in the back has burned out or that your brake light switch is broken. Consider having your car inspected by a mechanic to swiftly identify the problem.
BrakeLights Stay On Continuously
There may be a fault in the electrical circuit inside the rear brake light switch if your brake lights remain on even when you are not pressing the brake pedal.
Drivers behind you may become confused if your brake lights are constantly on even if you may be driving properly since your taillight suggests that you are about to slow down.
Additionally, if your rear brake light is left on all the time, it can quickly drain your car’s battery and harm the brake lamp or bulb.
It’s best to call a repair right away to replace the brake light switch if you have a problem with your brake lights so that no other electrical components are harmed.
Bad Cruise Control
If your car has cruise control, a broken or misaligned brake light switch can turn it off.
The switch for the cruise control and the rear brake lights is frequently shared. Therefore, if the brake lamp switch fails, your cruise control will probably too.
This does not imply that the brake light switch issue is the only reason the cruise control malfunctions. A blown fuse in the electronic control module or a malfunctioning speed sensor might also cause it to occur.
Therefore, get your brake light switch checked by a repair as well when your cruise control is acting up.
Car Won’t Turn On
All you have to do in these cars is depress the brake pedal to start the engine.
If the brake light switch isn’t communicating a precise signal to the vehicle’s computer confirming that the brakes are applied, your car may not start.
When this occurs, contact a mechanic or auto repair agency right away to have your brake light switch replaced.
Is AutoZone a brake light switch replacement shop?
Problems with the brake light switch or turn signals A replacement switch can be placed after you check the connection to the switch for corrosion or other problems and buy it at your neighborhood AutoZone.
What exactly does TCS on a 2003 Honda Accord mean?
Page 1 of the Traction Control System (TCS). A traction control system (TCS) is built into your Honda to help you retain grip while moving slowly over uneven or slippery terrain.
How do you repair a Honda Accord’s TCS light?
Maintaining control of your Honda Accord requires the TCS, or traction control system. The TCS switch eventually wears out, however this is rarely a serious indication that there are issues with your braking system.
Simply changing the TCS switch above your brake will resolve the TCS light issue on a Honda. As follows:
- The TCS’s electrical harness should be disconnected. To turn off the TCS switch, remove the screw.
- The TCS light should be gone after you start the engine.
- Buy a fresh TCS switch. Typically, it will set you back $30.
- Install the new TCS switch tightly, then swap out the electrical harness.
- Place a substantial object on the brake pedal of your vehicle. This will put some space between the brake pedal and the switch that is directly above it.
You can always take your automobile to a repair if you don’t feel confident replacing the switch. On the other hand, budget $50 to $100 for the replacement.
TCS is essential to your safety, but car insurance is just as crucial. However, don’t spend more than is necessary. Download the Jerry app instead to frequently search for and contrast quotes.
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and canceling your previous policy if you discover a fantastic deal. Customers save, on average, $900 annually.
What does a 2001 Honda Accord’s TCS light mean?
Wheel speed sensors, the ABS system, and electronic controllers are all necessary for traction control. The TCS warning light will illuminate if there is a problem with your vehicle’s traction control system and recorded diagnostic fault codes will indicate this. These codes will offer the vital information needed to identify and fix the TCS system’s malfunction. It’s the same with the check engine light; although codes have been stored to identify the general location of the problem, a mechanic still needs to run a diagnostic to find the exact issue. If you request it, a qualified Mechanic from YourMechanic will be sent directly to your location to perform traction control system and check engine light diagnostics and notify you of any necessary repairs. Please don’t hesitate to get in touch with YourMechanic again if you have any additional queries or worries; we’re always happy to help.
Car Won’t Start
Using the conventional keyed ignition, a broken brake light switch won’t prevent you from starting the vehicle. Driving a car with a push-button start, though, could get you into trouble.
You might not be able to start the engine because you have to depress the brake pedal. It won’t start if the system doesn’t detect that you are pressing on the pedal.
Does the switch for the brake lights have a fuse?
It’s unlikely that all three of your brake lights’ separate bulbs have burned out if none of them are functioning. The likelihood that you have an electrical system issue is much higher. Be at ease. It could appear difficult and pricey. Most likely, the electrical system issue is simply a blown brake light system fuse.
As each component of the car’s electrical system is protected by a fuse from amperage overload, the remainder of the car isn’t damaged if one goes out. If the fuse blows, electricity cannot reach the lights, even if everything else is in working order.
The power distribution center, which is either hidden behind the hood or under the dashboard, is where you’ll find the brake light system fuse, as well as all other fuses. The power distribution center is a new concept to you? It is merely another name for a fuse box. Locate the fuse that corresponds to the brake lights using the owner’s manual for your automobile.
For the next step, you must connect a test light (you can get one at any auto parts store). Turn the ignition of your car to the “on” position, take hold of the test light, connect it to a ground source, such as the dash or the car’s body, and gently touch the tester’s tip to each end of the fuse. Now, lightly depress the gas pedal. The test light should be on. If so, the fuse is working properly, and the broken brake light bulb is most likely the source of the issue. However, if the connection is only pressed on one side of the fuse and the test light turns on, the fuse is bad. No matter where the test light is linked to the fuse, if it doesn’t illuminate at all, you must replace the fuse. Verify that the replacement’s amp rating matches that of the original fuse.
But hold on—you’re not done yet! You must retest it after installing a new fuse. If both lights turn on, the fuse is operational, and the issue has been resolved. Be mindful that an electrical problem further up in the system may be indicated by a blown fuse. The replacement fuse will also blow in this scenario, therefore you need get in touch with an electrician to find the precise location of the problem.
When you press the pedal and the new fuse doesn’t light, the circuit is shorted out. That is a more difficult and expensive repair that must be done by a qualified mechanic.
What is the price of a new brake light switch?
Depending on the make and model of the car, a replacement brake light switch typically ranges in price from $30 to $75. The cost of the repair will normally increase by $80 if the brake light switch needs to be repaired. You can perform a brake fluid replacement on your own.
Why do my brake lights not function yet my running lights operate?
The most frequent cause of brake lights working but tail lights not is an improperly placed or damaged light bulb. A blown fuse, poor wiring, or corroded sockets or plugs are other potential causes. Another potential culprit is a broken control light switch.
These are the most frequent causes, though there are other ones as well. Here is a more thorough list of the most frequent reasons why brake lights will illuminate but not the taillights.
Is it possible to receive a fine for a broken brake light?
Drivers might not notice if your brake light is off, which could result in a collision. Driving while your brake light is out is prohibited. However, if you are stopped by the police, they can be understanding and let you leave after giving you a warning.
What symptoms indicate a blown fuse?
Take the fuse out of the holder. The fuse holder cap may occasionally need to be unscrewed using a tiny screwdriver.
Examine the fuse wire. The fuse has to be replaced if there is a clear gap in the wire or if there is a dark or metallic stain inside the glass. Follow steps 4 and 5 if you can’t tell whether the fuse is blown. Go to step 6 if it is certain that the fuse has blown.