Look for rust at the battery connector.
Cleaning the connectors fixed a situation where the bike would operate but not charge.
In This Article...
How do you use a screwdriver to start a motorcycle?
The first two hot wiring techniques mentioned above are useful, but you can also attempt alternative methods. Even though it is trickier than the other two, this one will work. To correct it, more tools are needed. Bring a wire, a flathead screwdriver, and a hammer. You may accomplish it with the aid of these equipment, and the procedure is comparable to hotwiring a car.
Step 1: Remove Ignition Cap
The resources you obtained earlier will be used here. The ignition cap must be taken off in the first stage, which requires the use of a hammer and screwdriver. Hammer the screwdriver into the ignition because it can be difficult to get it out. The screwdriver can be inserted and repeatedly wiggled to test if it comes off.
Step 2: Move Battery Power To The Motorcycle’s Ignition
You must be careful because this portion is more difficult. To prevent harm, take your time working on it. The wires should be visible when the ignition cap has been removed. The power from the battery must now be transferred to the ignition using cables.
During this step, exercise particular caution since if you don’t remove the cap properly, you risk damaging your ignition. It is not advised to utilize this technique. Only take it into consideration in an extreme emergency.
What should you do if your bike key is lost?
It may happen that the code on the ignition cylinder is unreadable or that you are unable to locate it. The next course of action in such a circumstance is to detach the ignition cylinder and take it to the locksmith. The ignition cylinder is held in place by two bolts that are easily detachable and a wiring harness. Some motorcycles, like Harley-Davidson, have teeny screws holding the wire in place that may be removed with a screwdriver. The lock’s pin is then turned by the locksmith by placing a blank key into the lock. He or she has an understanding of where the necessary cuts and fills are to create the key that suits the motorcycle.
Does the Honda key fob require reprogramming after a battery change?
You’ll need to reprogram your Honda key, which is likewise an easy and quick process, when the battery in your key fob needs to be changed.