The timing belt and water pump on your Honda should typically be inspected and/or replaced every seven years or 60,000–100,000 miles, according to the Honda maintenance plan.
In This Article...
How long does a Honda Civic timing belt last?
To replace your timing belt, however, you should generally wait somewhere between 60,000 and 100,000 miles.
Does a Honda Civic require a timing belt replacement?
Although timing belts are important, they don’t necessarily need to be replaced on a regular basis unless specifically advised to do so in your Honda owner’s manual. Between 60,000 and 100,000 miles, some automakers advise changing the timing belt, while others don’t.
When should a Honda Civic’s timing chain be changed?
While everyone is aware that a car’s timing belt needs to be replaced at suggested service intervals, what about the timing chain? What distinguishes a timing belt from a chain?
A timing belt is a toothed belt that travels outside of the engine and is constructed of high-quality rubber. It is protected by a cover.
A bicycle chain-like timing chain is constructed of metal. Because it requires engine oil for lubrication, a timing chain operates inside the engine.
Depending on the vehicle, a timing belt normally needs to be replaced between 40,000 and 100,000 kilometers. The fix costs a few hundred dollars. It is not necessary to replace a timing chain unless there is an issue with it.
Does the timing chain have a mechanical immunity? No, it is not, to put it simply. Timing chain issues are prevalent, particularly in automobiles with heavy mileage.
A timing chain can wear out just like any other moving mechanical part within an engine. The engine oil lubricates a timing chain. The timing chain can wear down more quickly due to insufficient oil changes, low oil levels, or bad oil quality.
A chain tensioner maintains the correct tension on a timing chain. An oil pressure or spring-loaded device could be used to run a chain tensioner.
How much does it cost to replace the timing belt on a Honda Civic?
Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
Should I replace my timing belt ten years later?
This is where all of the maintenance and replacement inconsistencies are found. According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
Honda stopped using timing belts when?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
What does a Honda timing belt cost?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
How can I tell if I need to replace my timing chain?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- Starting the car is challenging.
- The check engine light is on.
- The engine shakes or rattles while it is idling.
- The vehicle won’t start
- The timing chain has noise.
- Misfiring engines and sluggishness
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.
Do I need to change the timing belt and water pump?
Many modern engines now use timing belts instead of timing chains. The appropriate sequential operation of the crankshaft, pistons, and valves is guaranteed by both belts and chains. Compared to chains, belts are more efficient, lighter, and quieter.
Unless your vehicle has a time chain, which doesn’t often need repair, both parts are essential to the vehicle’s correct operation and should be replaced on a regular basis. See how these parts function below, along with information on the internal parts of the timing belt and water pump system that are related to them.
For information on when to replace your water pump and timing belt, consult your owner’s manual, or stop by and speak one-on-one with one of our service specialists. In general, whenever the timing belt is changed, the idler pulleys, tensioner, and water pump should also be replaced. Since the water pump is often driven by the timing belt, now is the ideal time to replace it. In addition, the manufacturer advises it.
A WORD FOR THE SMART. When requesting a “over-the-phone estimate for replacing a timing belt and/or water pump,” use caution. Less reputable businesses will offer you what appears to be a wonderful price to entice you in and not disclose the “full picture” (see above). The vast majority of the time, it is cost-effective and complete maintenance to replace the timing belt, water pump, tensioner, and idler pulley (where equipped) all at once. This is because, if one element needs replacement, the others are typically not far behind. For details, consult your owner’s handbook.
Caveat Emptor (Buyer Beware)
Let’s get to it: The less honest repair shop provides you a lowball estimate to replace the timing belt or the water pump with little to no labor and little to no cost for parts. When they get you in and your car is disabled on the hoist, they dial your number and ask, “Guess what you need? You guessed it—you need the complete timing belt and water pump package, which also includes the new idler pulley and new timing belt tensioner that your quote ought to have originally included! Hello!
Because you frequently need to remove the water pump in order to access the timing belt, the labor cost difference to perform both units at the same time is practically nonexistent in most vehicles! When compared to having to pay all that labor AND the expense of a water pump in the not-too-distant future when the water pump blows up, the cost of most water pumps is small.
In our humble opinion, it is misleading not to provide you with an accurate estimate of the total cost to replace the water pump, the timing belt, and any other small ancillary parts at the same time.
What signs or symptoms point to a timing chain failure?
symptoms of a defective timing chain
- When the engine is running or idles, there is a rattle. Unusual rattling noises when the engine is started or when the brakes are applied are a common sign that a timing chain in a car is damaged.
- Engine Misfire.
- Engine oil with contamination.
- Check Engine indicator.
- not being able to start the engine.
How long does it take to replace the timing belt on a Honda?
Depending on the vehicle, it is a complex, time-consuming process that can take 48 hours. However, repairing the timing belt before it breaks will avoid engine damage and ultimately cost you less money.
Which is superior, timing chains or belts?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
Which Honda engines are equipped with timing belts?
By looking at the model year and trim level of your Honda Accord, you can typically determine if it has a timing belt or a timing chain. There are typically two different engines available in the Honda Accord model years, each with its own corresponding engine system. Fortunately, there is a helpful guide. Your Honda Accord features a timing belt if it was manufactured between 1997 and 2002. Your engine has a timing belt if you have a 4-cylinder model from 2003–2007; if you have a V6 model from those years, it has a timing chain. A 4-cylinder Accord from 2008 to 2012 will use a timing chain, while vehicles with V6 engines have a timing belt. The V6 vehicles have a timing belt from 2013 to 2017, but the 4-cylinder variants continue to use a timing chain. All of the available engines come with a timing chain as of the 2018 model year.
Can I change the timing belt on my own?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- a fresh timing belt
- a fresh water pump
- Wrench socket set
- jar or bucket (for collecting coolant)
- tools for driving screws, such as Philips and slot drive
- new antifreeze/coolant
- Set of Allen keys
- leather gloves
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- Before starting, make sure the engine is entirely cool.