The timing belt and water pump on your Honda should typically be inspected and/or replaced every seven years or 60,000–100,000 miles, according to the Honda maintenance plan.
In This Article...
Honda timing belts’ actual lifespan is how long?
To replace your timing belt, however, you should generally wait somewhere between 60,000 and 100,000 miles.
How much does it cost to replace a Honda’s timing belt?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
Honda stopped using timing belts when?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
How much does a Honda timing chain replacement cost?
A timing chain replacement typically costs between $1,000 and $2,500. (parts and labor included.) The precise sum depends on the make and model of your car as well as your particular region.
Although some timing chain kits can cost up to $500, the timing chain itself is only $100 to $250. All of the gears, tensioners, and sometimes even the water pump are included in a good timing chain kit.
Costs of labor might range from $400 to $1500. It takes a lot of time and effort to replace the timing chain because it requires disassembling many engine components.
Additionally, if the timing is set incorrectly, the engine could sustain serious damage and require rebuilding or replacement. This explains the high labor cost and highlights the necessity of hiring a qualified mechanic to complete the work.
How many miles will a timing belt last?
That concludes our examination of the timing belt’s nature, operation, and significance. Can a timing belt travel more than 200 000 miles? Not at all. And to be honest, unless you have a junker that you don’t mind giving up, you really shouldn’t try this out in person. Expect severe engine damage if you continue to drive your automobile with a timing belt that is worn out, installed incorrectly, or otherwise flawed.
The cost of replacing your timing belt is by no means a cheap one. You’ll have to pay several hundred dollars, or in some cases nearly or more than a thousand. But this is little compared to the $2,000, $3,000, or even higher needed to rebuild a broken timing belt-related engine that has failed. Who would have thought that this tiny piece of rubber could fail and give you such heartache?
How long does a timing belt last?
According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
Am I able to replace the timing belt myself?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- a fresh water pump
- leather gloves
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- tools for driving screws, such as Philips and slot drive
- new antifreeze/coolant
- a fresh timing belt
- Wrench socket set
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- jar or bucket (for collecting coolant)
- Set of Allen keys
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
- Before starting, make sure the engine is entirely cool.
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
Timing belts are they covered by Honda warranty?
Every new Honda vehicle comes with a 3-year, 36,000-mile Limited Vehicle Warranty and a 5-year, 60,000-mile Limited Powertrain Warranty as standard equipment. A typical new car warranty should cover timing belts and other regular engine components.
Honda has a Limited Warranty on Replacement Parts that is valid for a year even if you have to pay for them out of pocket. For replacement parts bought from and installed by a Honda dealer, labor and component replacement are covered by the guarantee. The worldwide warranty for each Honda Genuine Remanufactured Part is three years or 36,000 miles.
Which Honda engines are equipped with timing belts?
By looking at the model year and trim level of your Honda Accord, you can typically determine if it has a timing belt or a timing chain. There are typically two different engines available in the Honda Accord model years, each with its own corresponding engine system. Fortunately, there is a helpful guide. Your Honda Accord features a timing belt if it was manufactured between 1997 and 2002. Your engine has a timing belt if you have a 4-cylinder model from 2003–2007; if you have a V6 model from those years, it has a timing chain. A 4-cylinder Accord from 2008 to 2012 will use a timing chain, while vehicles with V6 engines have a timing belt. The V6 vehicles have a timing belt from 2013 to 2017, but the 4-cylinder variants continue to use a timing chain. All of the available engines come with a timing chain as of the 2018 model year.
How much does a timing belt replacement cost?
The engine of your car cannot function without a timing belt. Timing belt preventative maintenance is far less expensive than waiting for it to break. O’Leary’s Automotive provides skilled mechanics who can assist if you need high-quality timing belt repair in Wilmington, North Carolina.
The camshaft and the crankshaft are two different types of shafts found in your engine. These shafts are made to start the engine cycle and deliver torque while controlling the pistons in the engines. The camshaft and crankshaft are controlled by grooves or teeth on the timing belt. This makes it possible for the engine valves to open and close precisely when necessary for efficient operation.
Timing belts comprised of chains and gears are used in some automobiles. Although these timing belts are more resilient, they need lubrication to function. The timing belts in many modern automobiles are comprised of a rubber composition. These timing belts tend to wear out more quickly but are quieter and more energy-efficient.
Warning Signs a Timing Belt Replacement is Needed
The majority of timing belts require replacement every 60,000 to 90,000 miles. Because it is crucial to the engine’s functionality, the timing belt acts inside the engine. Don’t put off changing the belt until it breaks. Your engine won’t start if your timing belt breaks.
You might observe one or more of the following if your timing belt is broken or worn out:
- lower oil pressure
- the engine’s smoke
- Rumbling or rough idling coming from the engine
- damaged pistons or valves
- engine stalls
Timing Belt Repair & Quality Auto Repair in Wilmington, NC
It is best to have a qualified, quality auto repair technician evaluate your car as soon as possible if you have encountered one or more of the aforementioned symptoms. Expect to pay between $300 and $500 for the service if your timing belt needs to be replaced. Many automobiles’ timing belts require some disassembly and reassembly since they are not always easily accessible. Smaller engines in economy cars result in less work. However, larger trucks, SUVs, or premium cars can take a lot longer.
Which is superior, timing chains or belts?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
What signs or symptoms point to a timing chain failure?
symptoms of a defective timing chain
- When the engine is running or idles, there is a rattle. Unusual rattling noises when the engine is started or when the brakes are applied are a common sign that a timing chain in a car is damaged.
- Engine Misfire.
- Engine oil with contamination.
- Check Engine indicator.
- not being able to start the engine.
How can I tell if I need to replace my timing chain?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- The timing chain has noise.
- The check engine light is on.
- Misfiring engines and sluggishness
- Starting the car is challenging.
- The engine shakes or rattles while it is idling.
- The vehicle won’t start
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.