A Honda Accord’s timing belt typically has to be replaced every 60,000 to 100,000 miles. Asking your mechanic to inspect the water pump, timing belt, and pulleys simultaneously when it’s time to replace your timing belt is an excellent idea.
In This Article...
When should a Honda Accord’s timing belt be replaced?
The timing belt and water pump on your Honda should typically be inspected and/or replaced every seven years or 60,000–100,000 miles, according to the Honda maintenance plan.
Has the 2005 Honda Accord has a timing belt or chain?
All 2017 Honda Accords with four cylinders have timing chains, whereas Accords with six cylinders have timing belts. Both have engines that interfere. Check out the information in the table below.
How much does a 2005 Honda Accord timing belt replacement cost?
Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
How long do timing belts on Honda Accords last?
To replace your timing belt, however, you should generally wait somewhere between 60,000 and 100,000 miles.
Do I need to change the timing belt and water pump?
Many modern engines now use timing belts instead of timing chains. The appropriate sequential operation of the crankshaft, pistons, and valves is guaranteed by both belts and chains. Compared to chains, belts are more efficient, lighter, and quieter.
Unless your vehicle has a time chain, which doesn’t often need repair, both parts are essential to the vehicle’s correct operation and should be replaced on a regular basis. See how these parts function below, along with information on the internal parts of the timing belt and water pump system that are related to them.
For information on when to replace your water pump and timing belt, consult your owner’s manual, or stop by and speak one-on-one with one of our service specialists. In general, whenever the timing belt is changed, the idler pulleys, tensioner, and water pump should also be replaced. Since the water pump is often driven by the timing belt, now is the ideal time to replace it. In addition, the manufacturer advises it.
A WORD FOR THE SMART. When requesting a “over-the-phone estimate for replacing a timing belt and/or water pump,” use caution. Less reputable businesses will offer you what appears to be a wonderful price to entice you in and not disclose the “full picture” (see above). The vast majority of the time, it is cost-effective and complete maintenance to replace the timing belt, water pump, tensioner, and idler pulley (where equipped) all at once. This is because, if one element needs replacement, the others are typically not far behind. For details, consult your owner’s handbook.
Caveat Emptor (Buyer Beware)
Let’s get to it: The less honest repair shop provides you a lowball estimate to replace the timing belt or the water pump with little to no labor and little to no cost for parts. When they get you in and your car is disabled on the hoist, they dial your number and ask, “Guess what you need? You guessed it—you need the complete timing belt and water pump package, which also includes the new idler pulley and new timing belt tensioner that your quote ought to have originally included! Hello!
Because you frequently need to remove the water pump in order to access the timing belt, the labor cost difference to perform both units at the same time is practically nonexistent in most vehicles! When compared to having to pay all that labor AND the expense of a water pump in the not-too-distant future when the water pump blows up, the cost of most water pumps is small.
In our humble opinion, it is misleading not to provide you with an accurate estimate of the total cost to replace the water pump, the timing belt, and any other small ancillary parts at the same time.
How much does a Honda timing belt replacement cost?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
How can I tell if I need to replace my timing chain?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- The timing chain has noise.
- The engine shakes or rattles while it is idling.
- Starting the car is challenging.
- The check engine light is on.
- The vehicle won’t start
- Misfiring engines and sluggishness
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.
Honda stopped using timing belts in what year?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
How long does it take to replace the timing belt on a Honda?
Depending on the vehicle, it is a complex, time-consuming process that can take 48 hours. However, repairing the timing belt before it breaks will avoid engine damage and ultimately cost you less money.
Are new Honda timing chains required?
The timing chain is used each time you use the engine. When should a timing chain be changed? Unless there is a specific issue, the timing chain typically needs to be replaced between 80,000 and 120,000 miles.
What does a timing belt for a Honda Accord cost?
Timing belt replacement cost estimation for the Honda Accord. Timing belt repair for a Honda Accord typically costs between $555 and $737. While parts are priced between $209 and $300, labor costs are predicted to be between $346 and $437.
A timing belt’s lifespan is 200 000 miles.
That concludes our examination of the timing belt’s nature, operation, and significance. Can a timing belt travel more than 200 000 miles? Not at all. And to be honest, unless you have a junker that you don’t mind giving up, you really shouldn’t try this out in person. Expect severe engine damage if you continue to drive your automobile with a timing belt that is worn out, installed incorrectly, or otherwise flawed.
The cost of replacing your timing belt is by no means a cheap one. You’ll have to pay several hundred dollars, or in some cases nearly or more than a thousand. But this is little compared to the $2,000, $3,000, or even higher needed to rebuild a broken timing belt-related engine that has failed. Who would have thought that this tiny piece of rubber could fail and give you such heartache?
How long does a timing belt last?
According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
What happens when the timing belt fails on a Honda Accord?
With a broken timing belt, your automobile cannot operate. You won’t be able to drive at all by the time the belt snaps because the harm has already been done. The vehicle will need to be towed to an auto repair facility.
Should I change the thermostat when I replace the timing belt?
The best course of action is to replace the timing belt at the same time as the thermostat if the thermostat malfunctions and access to it requires removing the timing belt.
How can I tell if my timing belt needs replacement?
Your timing belt may be significantly damaged if you hear a ticking sound emanating from the engine of your car. Your car’s timing belt is connected to the crankshaft and camshaft of the engine through a number of pulleys. The connecting rods of the engine, which are connected to the pistons inside the combustion chamber, provide power. The rocker arm assembly and cylinder head valves are controlled by the camshaft, which delivers gasoline to the combustion chamber. The exhaust manifold is the next point of exit for the released gases. Your car’s timing belt may start to twitch inside the engine when it begins to wear out. This can potentially be a symptom of low oil pressure.
Can I replace my own timing belt?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- jar or bucket (for collecting coolant)
- Set of Allen keys
- new antifreeze/coolant
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- a fresh timing belt
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- tools for driving screws, such as Philips and slot drive
- a fresh water pump
- Wrench socket set
- leather gloves
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
- Before starting, make sure the engine is entirely cool.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.