What Year Is My Honda Outboard?

Honda / By

Utilizing the key below, locate the model year code in your model number to ascertain the year.

Note: Yamaha stopped using the year in the model number starting in 2005. The transom bracket of motors manufactured after 2004 will display the production date.

There is no year information contained in the model or serial numbers of Chrysler Outboard engines.

See this graphic showing the years associated with Chrysler serial numbers. By hitting CTRL+F, you can determine the matching year by searching for your serial number.

There is no year information contained in the Force Outboard engine model or serial numbers.

See the Force serial number year chart, which is available here. By hitting CTRL+F, you can determine the matching year by searching for your serial number.

Nothing in the model or serial numbers of Mercury Mariner Outboard engines immediately indicates the year.

The starting serial number is determined by the first serial number sold within a year. The serial numbers that are between the first serial number of that year and the next belong to the same year. To discover the starting serial number for the range that includes your engine, look up the horsepower of your engine on the Mercury Mariner serial number year chart, which is found here.

How can I determine the year of my outboard motor?

  • Find the serial number on the outboard motor mounting bracket or the silver plug on the motor’s top.
  • Record the serial number.
  • As the key code, use “INTRODUCES” to decode the serial number.
  • To find the year, find the last three numbers.

How are the serial numbers on Honda engines read?

Look for a model number sticker on the engine to determine the model number. Model numbers for Honda engines always begin with the letter “G,” such as “G100,” “GX610,” or “GXV160.” The base engine model is this one. For the majority of your demands, the engine model and serial number should be sufficient.

How can I tell whether an outboard motor is a Honda?

Although every model name begins with “BF,” these two letters are absent from the engine.

The frame’s serial number is stamped into a piece of metal on or close to the stern bracket.

This could also be called a vehicle identification number or a product identification number (VIN).

Can you use a boat motor’s serial number to find it?

To determine the year your engine was made based on the serial number or model number, choose your boat motor manufacturer from the list above. It will be easier for you to order a manual and parts if you know the year of your engine.

On a boat motor, where is the serial number located?

We’ll need as much information as possible if we need to repair or replace the motor on your boat. It may be simpler to replace your motor with the appropriate parts if you know the make, model, and serial number. Contrast this with the brand, model, and year of your boat.

You’ll see a plate on the side of your motor. You can find the make, model, and serial number here. If it’s an outboard motor, the serial number is the only thing you’ll need.

The information is the same on each model plate, although the layout may change. The model and serial numbers are typically labeled, but if they are not, ask the repairer if you are unclear or get assistance from a dealer.

  • The serial number for Yamaha is on the far right of the second line, while the model code is the top number.
  • Evinrude – An Evinrude’s transom or mounting bracket is where the serial number is found. The serial number has a label. The model number is especially significant because it provides information about the motor’s type, year, and horsepower.
  • Honda: The model name typically begins with BF and is followed by the letters on the motor’s rear, such as BF50. The serial number, also known as the product identification number, has the format “BXXX-XXXXXXX.”
  • A Parsun’s plate can be found on the bracket’s left assembly or the upper portion of the bracket swivel. The serial number has the designation SN.
  • The second half of the number on the second line is the serial number for Suzuki.
  • Serial numbers for Mercury are typically labeled.

How is a Honda VIN number decoded?

See how each digit or segment in the 17-digit string is decoded in the VIN decoding diagram below.

The model and model year of the car, the make, the location of the vehicle’s manufacture, and other details are all indicated by a specific character or set of characters in a Honda VIN. Since the model year 1981, a VIN that adheres to the ISO standard has been utilized. The letters O (o), I I and Q (q), which resemble the numbers 0, 1, and 9, are absent from the VIN.

Here is an example Honda VIN that has been decoded using the aforementioned diagram and the Honda decoding chart: 1HGEJ8145WL012057.

  • Production Sequence 012057
  • faults and recalls
  • L for Plant (East Liberty, Ohio, USA)
  • fuel economy
  • (Civic EX 2/4 Door) 4 = GRADE
  • EJ8 = Civic 2/4 Door 1.6L Model
  • 1.0 = the country of manufacturing (United States)
  • H = The Manufacturer (Honda)
  • existing warranty
  • rating for safety
  • equipment information
  • market price
  • Security Code: 5
  • G = Type of Vehicle (Passenger car)
  • 1 denotes Body Type and Transmission (2 Door Coupe, Manual)
  • Model Year = W (1998)

How can I tell what Honda model I have?

  • Section for Vehicle Identification (digits 10-17). The vehicle’s distinctive serial number is the VIS.

The code can be used to find up relevant information from governmental organizations, insurance companies, and other institutions in addition to information included in the Honda VIN itself.

Where to find it?

The Honda VIN is located on the car itself:

  • On the engine block or other components found underneath the hood
  • Examine the driver’s side door frame, particularly the region where it connects to the car’s body.
  • Look for a metal plate on the driver’s side behind the windshield as you exit the vehicle.

If you can’t find your Honda VIN in the places mentioned above, you might be able to discover it on your car’s insurance and registration paperwork.

On a Honda engine, where is the model number located?

Version Number The model number is written on a sticker that can be found on the recoil or engine cover. Model numbers for Honda engines that begin with the letter G include G100, GX690, and GCV160. The base engine model is this one.

Motor Type Code The engine type code can be found imprinted onto the side of the engine right next to the serial number. Up to 4 characters may be used in engine type codes. Asterisks may be used as placeholders when a code is fewer than 4 characters long (for example, an engine stamped with QX** is a QX type engine).

How old is a boat motor, exactly?

Looking at a paper could be all it takes to determine the year your outboard motor was constructed. For certain motors, the hints are on the motor and are awaiting your use of a key word to solve them. Because neither the model number nor the serial number will provide you any information, you must ask the dealer for at least one if you want to know more than a general time period during which that particular model of motor was created.

If you reside in a state that mandates registration, check the registration certificate the state provided, or the title if you call Utah, Texas, Ohio, South Carolina, Oklahoma, or Missouri home. Both the registration and the title clearly state the model year or the date of manufacturing. This may be one of only two options available to owners of Honda outboard motors to locate the information without calling the Honda dealer.

Look for the details the dealer included about your motor in the operator’s manual for your motor. You must employ a different technique if you don’t have the motor operator’s manual that was packaged with your motor when it was brand-new.

Go to the motor and look for an embossed, metalized tag or plate with the manufacturer’s name prominently stamped at its top on the motor’s swivel bracket. The model year, or the year the motor was created, is also displayed on this manufacturer’s tag, with the exception of Honda motors.

Pull the motor’s top cowling away. This information is engraved on the top center of the engine block of some well-known outboard motor models, although it may also be on a tag that is often located on the right side of the engine block.

If you have an Evinrude or Johnson outboard, check the model number. The 10-letter word “introduces” provided the final two letters of the model number. Up until the letter “E,” which equals nine, each letter equals a different number: the first letter is “1,” the second, “2,” the third, etc. The numbers are the last two numbers of the motor’s year of construction, and the final letter of the word, “S,” stands for “0.” In 2009, a model with the number XXX-XX-XXX-XYX-X SE was created since “S” stands for “0” and “E” for “9.

Tips

  • Ask the closest dealer who carries the outboard motor brand you own if none of these options are available to you. Many outboard-parts websites offer a “lookup capability,” but their main objective is to sell components rather than provide information.

How do you gauge a Honda outboard’s shaft length?

The versatility of an outboard engine is one of its main advantages. With the right mounting, almost any type of boat can be propelled by an outboard motor. You will see outboards hanging on the sterns of anything from little canoes to large cruising sailboats, in addition to motorboats built for large outboards. A tiny auxiliary motor is commonly installed on single-engine boats for emergency use.

The shaft length of an outboard motor is one of the most important decisions you can make, regardless of the size of the boat you are operating. Since every boat is unique, there are several various standard lengths produced by the motor manufacturers. Looking at what you have and pulling out the measuring tape will help you determine the correct size. But how would you quantify it?

Measure the distance between the bottom of the mounting bracket, which sits on the transom, and the top of the cavitation plate, which is the horizontal surface of the lower unit just above the propeller, to determine the length of your outboard motor shaft.

There is an illustration that demonstrates where to take the measurements in the article further on. I’ll also go over the distinction between short and long shafts and how they differ depending on the kind of boat.