By looking at the model year and trim level of your Honda Accord, you can typically determine if it has a timing belt or a timing chain. There are typically two different engines available in the Honda Accord model years, each with its own corresponding engine system. Fortunately, there is a helpful guide. Your Honda Accord features a timing belt if it was manufactured between 1997 and 2002. Your engine has a timing belt if you have a 4-cylinder model from 2003–2007; if you have a V6 model from those years, it has a timing chain. A 4-cylinder Accord from 2008 to 2012 will use a timing chain, while vehicles with V6 engines have a timing belt. The V6 vehicles have a timing belt from 2013 to 2017, but the 4-cylinder variants continue to use a timing chain. All of the available engines come with a timing chain as of the 2018 model year.
In This Article...
Which Honda engines are equipped with timing chains?
All Honda Accord engines have a timing chain of the model year 2018 and forward. Timing chains were used on 4 cylinder Accord engines from 2003 to 2017 whereas timing belts were used on V6 engines. Timing belts were standard on all Accord engines built in 2002 and earlier.
The 2015 Honda Civic’s timing belt or chain, which is it?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed.
Timing belt or chain: which is superior?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
When should a Honda Civic timing chain be changed?
Older cars might have a timing chain, which is comparable to a motorbike chain and has a lifespan of about 60,000 miles. For robustness and long life, more recent models use timing belts consisting of polyurethane and Kevlar. Although they can last up to 100,000 miles, it’s always a good idea to change them before that.
A 2010 Honda Civic should have a timing belt, right?
Honda has been selling the Civic, a subcompact automobile, since 1972. They are known for being frugal and dependable while still being sporty.
All Honda Civic engines have a timing chain and are interference from 2006 to 2021.
Timing chains and interference are used in the 2002–2005 Honda Civic’s 1.3L and 2.0L engines.
The Honda Civic 1.7L engine features a timing belt and is interference from 2001 to 2005.
From 1988 to 2000, all Honda Civic engines were interference-type and had timing belts.
In contrast to the 2005 Honda Civic DX D17A1 1.7L 117 hp 4-Cyl option, the 2021 Honda Civic 2.0L Turbo option uses a timing chain.
A timing belt is there on a 2005 Honda Civic, right?
For robustness and long life, more recent models use timing belts consisting of polyurethane and Kevlar. Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
How can I tell if I need to replace my timing chain?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- The engine shakes or rattles while it is idling.
- The vehicle won’t start
- The check engine light is on.
- Misfiring engines and sluggishness
- Starting the car is challenging.
- The timing chain has noise.
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.
How much does it cost to repair a timing chain?
How much does it cost to replace a timing chain? Timing chains can be changed by a professional for $1,600 to $1,800 or you can do it yourself for $600 to $800. The cost is significant because it’s challenging to replace this component.
Which pre-owned automobiles have timing chains?
Timing chains are being installed in more and more vehicles. The majority of Mercedes and BMW vehicles come with timing chains.
A non-exhaustive list of vehicles that can have timing chains installed is provided below:
- Skyactiv-G engine in Mazda
- 159 Alfa Romeo
- Duster, Sandero, and Sandero Stepway from Dacia
- Corvette by Chevrolet
- a lot of Mercedes
- Every SAAB has a turbocharged engine.
- Jazz Honda
- many BMWs
- Every Cadillac
You may physically inspect your car’s timing belt or chain by removing a cover at the end of the engine, consulting your owner’s manual, or asking your mechanic. The timing chain is easily identified by its metal links when the cover is removed with the proper tool, whereas the belt is comprised of rubber and is considerably more flexible.
Ask your mechanic: “How do I tell whether my automobile has a timing belt or chain? if you are still unclear.
You won’t typically need to replace your car’s timing chain. Poor lubrication is likely to have ruined a chain that has to be replaced.
If the timing chain is determined to be damaged, it’s critical that you hire a reputable expert to handle the repair. In extreme cases, the mechanic will even need to completely remove the engine to get to the timing chain. If the timing chain breaks, it may harm other engine components like the valves, making the repair more involved and pricey.
How much does a timing belt replacement for a 2015 Honda Civic cost?
Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
How can timing chain failure be avoided?
- Check your timing chain cover for leaks frequently.
- Make that the engine oil is not running low.
- Avoid letting the engine get too hot; if it does, don’t drive.
Can I drive on a bad timing chain?
The timing chain expands over time, as was already mentioned. Even though you can still drive with an old timing chain, we advise replacing it as soon as you observe stretch or other signs of failure.
A faulty chain can jump many teeth or entirely break if you drive on it for an extended period of time and it continues to strain, which can seriously harm your engine’s internal components.
Should the timing chain or the engine be replaced?
A: In general, a timing chain should last the lifespan of an engine if the oil was changed routinely and the engine has a timing chain.
How is a timing chain checked?
Remove all of the spark plugs and the distributor cap to properly assess the degree of timing chain wear. Turn the crankshaft at least two full revolutions backward of rotation with a wrench on the harmonic balancer bolt to release any slack in the timing chain.
How can I lengthen the lifespan of my timing chain?
Timing chain vibration is prevented by using chain guides and silencers. Each of these parts ages as well. How can you tell if the timing chain needs replacing?
When the timing chain is worn, the engine frequently feels sluggish, has little power, or is difficult to start. Perhaps the Check Engine light will also come on. This is due to the fact that as the chain ages, it stretches and the ignition and valve timing advance more.
Numerous noises coming from the engine’s timing chain cover area can also be caused by a worn timing chain, chain guides, or chain tensioner. The timing chain noises can be whirring, whining, buzzing, whining, or rattling.
If the timing chain needs to be replaced due to wear, a new tensioner, guides, and other chain drive mechanism components are often included with the kit. The motors of many cars have two or even three chains, and frequently your auto repair shop will advise replacing all the chains at once.
Depending on the vehicle model, timing chain replacement costs might range from $370 to $1,500.
Finding the right process to set the timing when a new chain is inserted is necessary if you intend to replace the timing chain yourself. This kind of information can be found in the service handbook for your car.
It’s rather simple to replace the timing chain in old-style pushrod engines. If you drive a new front-wheel drive vehicle with a transversely positioned engine, you may not have such luck because the engine compartment may be relatively small. In a V6 engine, it becomes considerably more challenging.
Maintaining your engine properly and changing the engine oil at specified intervals will help you avoid timing chain issues. Oil filters and engine oils of the highest caliber should be used. The timing chain will always be lubricated if the oil level is maintained at the right level. Given that many modern engines are known to use oil, this is extremely crucial. A timing chain in a well-maintained engine can last up to 300,000 miles or even more.