Use Honda Heavy Duty Brake Fluid DOT 3 at all times. If it is unavailable, you should only temporarily substitute DOT 3 or DOT 4 fluid from a sealed container.
In This Article...
What might I substitute for gear oil?
Alternatives to Gear Oil Fluid for manual transmission (MTF) An adequate MTF for your make and model is an obvious replacement for the American Petroleum Industry Gear Lubricant (API GL-4 or GL-5) commonly used in your vehicle. Motor oil used in automatic transmissions (ATF).
When should I replace the fluid in my Honda Civic’s manual transmission?
The majority of automotive professionals agree that changing the gearbox fluid should be done between 60,000 and 100,000 miles. If your car has a manual transmission, it might need to be changed earlier, at about 30,000 miles.
Honda MTF 3’s viscosity is what?
Honda’s MTF-3 oil, which was specially created using cutting-edge oil technology, ought to be your one and only option for changing transmission fluid. Honda recommends changing parts every 50–75,000 miles, although we normally advise replacing parts in Type Rs and other high-performance Hondas every 20–25,000 miles.
MTF-3 is 75w-80 viscous and fulfills GL-4 specifications. Particularly K20 gearboxes are notorious for becoming “notchy” over time. In some circumstances, new MTF-3 might significantly enhance the shift stroke.
Which manual transmission oil is the best?
Top Fluids for Manual Transmission
- Honda Genuine Fluid 08798-9031 Fluid for manual transmissions.
- Fluid for manual transmissions from Valvoline, 1 QT.
- GL-4 Manual Transmission and Transaxle Lubricant by Red Line SAE 75W80.
- XT-M5-QS Full Synthetic Manual Transmission Fluid from Ford Genuine Fluid.
What is gear oil for synchromesh?
The high-performance multi-vehicle manual transmission lubricant called Valvoline Synchromesh MTF was created to suit the rigorous requirements of passenger automobiles with manual transmission gearbox applications in specific General Motors and Chrysler vehicles with synchronizers.
Can I use motor oil as fluid for my manual transmission?
The viscosity of manual gearbox oil was initially quite low. Changing gear became more challenging as a result, especially in cold climates. Automatic transmission fluid is now used in an increasing number of manual and automated manual transmissions to prevent this.
Heavyweight hypoid gear oil, ordinary motor oil, and automatic transmission fluid are all acceptable fluids for manual transmissions.
Is it possible to add gear oil to a manual transmission?
Your manual gearbox’s life and performance depend on the choice of gear oil or transmission fluid. (Image/Tremec)
Choosing the proper gear oil for your manual transmission is more difficult than it might seem, as we covered in our piece Automatic Transmission Fluid 101.
We developed this helpful primer (pardon the oil pun!) to assist you in making wise choices because there are dozens of different types of gear oils, each with its own unique designation and function.
Remember that the majority of contemporary manual gearboxes have gear oil service intervals that are considerably north of 50,000 miles, with many of them using “lifetime oils.”
However, gear oil is changed by drivers to improve transmission performance, such as easier shifting or increased longevity under harsh situations. Continue reading if you can relate.
Your manual transmission’s gearbox frequently uses gear oil, also known as gear lubricant, and older transfer and differential cases also frequently use it. There are other options for a manual transmission besides gear lube, though. In truth, many contemporary manual transmissions are actually designed to work with automatic transmission fluid rather than gear oil. Whatever kind of fluid or oil your manual transmission employs, its main job is to avoid metal-to-metal contact between the meshing gears by lubricating.
Is better gear oil thicker oil?
- Due to their enhanced cooling capabilities and thinner films that better coat quickly moving components, lower-viscosity gear oils provide superior protection and lubrication for high-speed gearboxes that are operating under relatively light loads.
- Higher viscosity gear oils are better suited for slower gears that work under higher pressures and loads because they provide thick films, improved wear resistance, and corrosion prevention. Additionally, they better seal the components, allowing for longer change intervals.
Is GM and Pennzoil Synchromesh the same thing?
Chevron/Texaco manufactures almost all of the fluids used by General Motors. Before the merger, Texaco
Quaker State and Pennzoil are now part of the same corporation. Under both brands, quarts are available. Additionally, it is sold under the Pennzoil name in buckets.
All Synchromesh fluid is produced in accordance with the same GM guidelines. Both have been utilized by locals, and I don’t believe anyone has noticed a difference.
How often should a Honda Civic have its gearbox fluid changed?
How Frequently Should Transmission Fluid Be Changed? Every 30,000 to 60,000 miles, you should change your transmission fluid since fluids degrade over time.