Advanced Full Synthetic 0W-20 Motor Oil, 5 Quart, Valvoline (Part No. 881150)
In This Article...
Need synthetic oil for a 2017 Honda Accord?
For the 2017 Accord’s engine to run at its best and last the longest, full synthetic oil is advised. Depending on the engine, a car’s oil capacity ranges from 3.7 quarts for a 2.0L (122 ci) four-cylinder engine to 4.4 quarts for a 2.4L (144 ci) four-cylinder engine to 4.2 quarts for a 3.5L (213 ci) V6 engine.
It’s a good idea to educate yourself on potential vehicle maintenance requirements so that you can keep your 2017 Honda Accord in top condition for as long as feasible. We’ll examine the distinctions between synthetic and conventional oil changes in this post, as well as the reasons why it’s crucial to understand how much oil your car requires for maximum performance.
The amount of oil a 2017 Honda Accord consumes
The 2.4-liter, four-cylinder engine of the 2017 Honda Accord can hold 4.4 quarts, or 4.2 liters, of oil.
Remember that an engine’s oil capacity is not the same as its displacement. Oil capacity is the amount of oil needed for a proper oil change, whereas displacement is the amount of oil required for the cylinders to operate.
Do not mistakenly believe that the terms “engine displacement” and “oil capacity” are synonymous.
What kind of oil does a 2017 Honda Accord need?
Now that we know exactly how much oil your Accord requires, let’s speak about the kind of oil you must use. Don’t just walk into the auto parts store and grab the first jug you see because not all engines utilize the same type of oil.
You must use premium-grade 0W-20 oil in your 2017 Accord as per Honda’s advice.
But what do those characters represent? Winter is indicated by the W, and the numbers refer to the viscosity (thickness) of the oil.
The 0 before the W denotes that the oil has the right viscosity at 0F and below, while the 20 denotes that it can continue to function properly even at very high temperatures of up to 212F. Your engine will endure less wear and tear if you use this type of oil.
As a point of reference, if you ever see oil labeled as detergent motor oil, it contains chemicals to lessen corrosion accumulation in your engine.
I need an oil change for my Honda Accord, what kind?
For traditional oil, Honda advises having your 2019 Honda Accord’s oil and filter replaced every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- exceeds ILSAC GF-5 requirements for new car warranties
- designed specifically for Honda and Acura automobiles
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- prevents the buildup of sludge and varnish
- reduces wear to extend engine protection
- Low volatility for less reliance on oil
- Excellent thermal breakdown and viscosity resistance at high temperatures
- Excellent pumpability at low temperatures
Honda advises using synthetic motor oil?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
What is engine oil 0W 20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
How often should the oil be changed in a Honda Accord?
We advise changing the oil in vehicles utilizing synthetic oil every 7,500 miles or every six months, whichever comes first. Oil changes for traditional oil-powered vehicles should be performed every 3,000 miles or three months, whichever comes first.
Is 0W 20 equivalent to 5W 20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
How is synthetic oil produced?
Even if synthetic oil has certain man-made components, it is still oil. A base oil, powder additives, and a carrier oil that ensures an uniform dispersion of the additives are used to create synthetic oil.
Oil used for refining is used to make both synthetic and conventional motor oils. Most synthetics start out as highly refined crude oil that is extracted from the ground. It comes from the same place as regular oil. Other synthetic oils employ a synthetic oil or intentionally created chemicals as their basis oil. The degree of refining is where synthetic oil and conventional oil differ most significantly.
The base oil is one of a number of “oil classes, ranging from mineral oils produced from crude (Group I and II) to wholly synthetic, compound-based oils” (Group V). All oil grades are produced using performance-enhancing additives.
Scientific control over molecular size and purity is also a product of refinement procedures and constituents. This can improve performance by decreasing sludge buildup and friction.
Synthetic oil technological advantages include:
- improved performance in cold and harsh conditions
- less contaminated and cleaner oil
- Less friction is caused by uniform molecule size.
- Additives can clean engines and provide boost protection.
- Engineering and refinement lessen deposits
The first synthetic oil was created in 1929. It has been improved with technology and resources to accommodate aircraft, high-performance automobiles, and typical consumer vehicles. Nazi Germany campaigned for synthetic oil to power their troops, for example, when the Allies forced oil shortages on Germany during the Second World War. During the American Energy Crisis of the 1970s, there was a significant effort made to increase fuel efficiency by developing superior synthetic oils.
Technological advancements have also increased the demand for synthetic oils. High-performance machinery and vehicles, such as sound-beating airplanes and industrial plants, must function in harsh environments. Highly refined engine oil allows improved temperature resistance.
What does a Honda Accord have a high mileage?
This question can be viewed in two different ways, and as a result, there are two potential responses. Some people define a high-mileage car as one that has been driven much more than typical.
An average US driver logs 14,000 miles a year. The Honda Accord is a high mileage Honda if the odometer shows a reading that is significantly higher (after dividing it by the Accord’s age). Similar to this, a low mileage Accord is one that has been driven considerably fewer miles than its average yearly mileage.
On the other hand, some individuals think that an Accord’s actual mileage is a good predictor of whether it is a high mileage car or not. Some people think that once a car has been driven 100,000 miles, it has reached the end of its useful life.
However, because to improvements in manufacture, assembly, and quality control, modern cars can travel 200,000 miles without experiencing any major problems if they are properly maintained.
An Accord should last up to 300,000 miles or more, which translates to about 22 years of use. Therefore, an Accord that has traveled more over 300,000 miles or 22 years can be deemed excessive mileage.
How much of the oil should I change in a Honda?
Once the 15% mark is reached, your Honda Maintenance Minder System will additionally notify you by displaying a yellow wrench icon. This does not imply that the car is dangerous to operate. Simply put, it signifies that the engine will soon require a new oil change due to the oil’s extreme degradation.
When is the ideal time to replace the oil on a brand-new car in 2022?
It’s crucial to be aware that every automobile has its own owner’s manual and that different oil change intervals may be suggested for different car brands.
Typically, it was recommended to obtain an oil change for any car after 3000 miles. This may sound extremely low, but many automakers nowadays have improved engine components and oil chemistry to allow automobiles to travel between 7000 and 10,000 miles before requiring their first oil change.
Most auto dealers now understand that the ideal time to get an oil change on a brand-new automobile is between 500 and 2000 miles. When compared to the first 7000 miles, there appears to be a significant difference.
This advice is given out of caution because newer cars require more care and attention in the beginning of their use than a car that has been on the road for five years.
The various recommendations demonstrates that for the most current information and advice on how to take care of your engine, a new automobile owner should always look to the specifics in the owner’s handbook.
How frequently should 0W 20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.