Extended Performance of Mobil 1 5 quarts of High Mileage 5W-20 Full Synthetic Motor Oil (Part No. 15020)
In This Article...
Automatic Transmission Oil Capacity
Depending on the automatic gearbox, the 2021 Honda Odyssey can hold 8.8 or 9 quarts (8.33 or 8.52 liters) of automatic transmission oil.
What distinguishes 5W-20 oil from 5W 30 oil?
Thus, 5w20 is a thinner oil during operation temperatures than 5w30 due to viscosity, whereas the latter is thicker. Most manufacturers today create engines that use 5w20 oil, thus it’s crucial to keep with this viscosity and not switch to 5w30.
What makes 0W-20 and 5W-20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
What occurs if I use 5W30 as opposed to 5W20?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.
Using the proper oil keeps your engine operating at its best.
use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
Is it acceptable to substitute 5W30 for 5W20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
I’m using 5W20; when should I move to 5W30?
As you have probably already deduced, 5W20 performs better in cooler climates. 5W30 will be the best bet if you need engine oil for summertime performance. Only your own mechanic or the car’s manufacturer should advocate switching to this sort of oil, though.
By using an oil that your engine isn’t made for, you run the danger of damaging it. Keep in mind that 5W20 motor oil will flow through your engine more readily than 5W30.
If nothing else is specified, keep to 5W20 during winter. Use 5W30 in the summer if doing so won’t cause any problems for you.
The amount of oil required by a 3.5 Honda engine
The 3.5-liter V6 engine in the 2022 Honda Pilots can hold 5.4 liters or 5.7 quarts of engine oil.
This unusual three-row SUV is loaded with fantastic amenities, gets great gas mileage, and has plenty of room for both passengers and goods. It’s a great choice for those who want all the convenience of a minivan without getting a minivan. Many individuals are unaware that changing their own oil at home might help them save money and maintain the condition of their Pilot.
Does 5w20 work well at high mileage?
designed for vehicles with heavy mileage ExxonMobil advises using Mobil 1 High Mileage 5W-20 motor oil in high mileage vehicles (even those that have previously used conventional lubricants of lower grade), such as: Cars. Trucks.
Will using the incorrect oil harm my engine?
The incorrect engine oil can harm an engine by improperly lubricating its parts. As a result, there will be metal-on-metal contact between the moving pieces. Soon after, friction develops, leading to engine component wear. Additionally, it might harm your engine’s pistons, oil pump, cylinder wall, bearings, and other parts. This will thus limit the engine’s life and almost probably result in an engine failure.
What happens if you fill your automobile with the incorrect type of oil?
The engine may seem noisier or start making a ticking noise if you applied the incorrect oil since the parts are working harder to get the engine moving. If the oil is too thick and cannot flow around your engine as easily as it should, this can also be a problem in cold weather, making it more difficult to start the automobile.
Because using the incorrect oil can create leaks, you might see a few oil stains in your garage or under your car, or you might smell burning when driving. Engine parts may not be adequately lubricated if the oil isn’t performing as it should, resulting in friction and the potential for burning the oil. This is unquestionably a red flag that needs to be addressed right away.
The fact that you feel like you need to fill up the automobile more frequently may possibly be related to the oil. Your engine will have to work harder and burn gasoline more quickly if the oil you’ve used is too heavy and thick to function properly.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
Is 0W oil preferable to 5W?
The ability of a multi-grade oil to be pumped and flow at cooler temperatures is indicated by its first number; the “W” stands for winter. As a result, a 0W oil will be able to flow more quickly and reach crucial engine components better than a 5W or a 10W oil, especially at extremely cold temperatures and during engine startup.
The viscosity measurement value under engine operating circumstances is represented by the second number. For your engine to be properly lubricated and protected, this viscosity value is essential.