The 2020 and 2021 Honda CR-V (as well as the Hybrid variants), according to the Honda owner’s handbook (2020 Honda CR-V p. 586; displayed below), use either Honda Genuine Motor Oil or high-grade 0W-20 commercial engine oil.
In This Article...
Is synthetic oil required for a Honda CRV?
Honda began using a 2.4-liter four-cylinder in 2007; the engine was unchanged even after the vehicle underwent a redesign in 2012. In that scenario, you should use a quality 5W40 synthetic or semi-synthetic oil from a reputable brand.
Is synthetic oil required for my Honda?
According to Mel Yu, a car analyst for Consumer Reports, Honda is not alone. About 70% of new automobiles for the 2019 model year come with 100% synthetic or mixed oil.
Although some companies, like Honda, don’t specifically ask for synthetics in their engines, Yu notes that the low-viscosity lubricants those engines need are only available in synthetic form. Some companies employ “synthetic mix oil,” which combines synthetic and conventional oils. Blends are far less expensive but don’t offer all the advantages of synthetics, he continues.
Additionally, a lot of places that replace oil also sell synthetic oil as a substitute for regular engine oil.
The 2018 National Oil and Lube News annual study, according to Will Hixson, spokesman for the Automotive Oil Change Association, reveals that more than half of car owners select synthetics or synthetic mixes when they get their oil changed.
Does using synthetic oil make sense? The decision to is a good one, but only if your car has particular requirements.
Synthetic motor oil has some benefits over regular motor oil. They are intended to be more successful at:
preventing oil deterioration, allowing it to last longer than regular oil
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- API Service SN that Saves Resources
- GF-5 ILSAC
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- exceeds ILSAC GF-5 requirements for new car warranties
- Excellent pumpability at low temperatures
- prevents the buildup of sludge and varnish
- designed specifically for Honda and Acura automobiles
- Excellent thermal breakdown and viscosity resistance at high temperatures
- Low volatility for less reliance on oil
- reduces wear to extend engine protection
How frequently should a Honda CR-V have its synthetic oil changed?
For standard oil, Honda advises changing the oil and filter in your 2020 Honda CR-V every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Is 0W-20 equivalent to 5W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Can I substitute 0W-20 oil for 5w20 oil?
My car is intended to use 5W-20 motor oil, a reader writes. I unknowingly purchased 0W-20 and changed my oil without realizing it. Is it okay to keep using the 0W-20?
Our response: 0W-20 is typically a completely suitable replacement for 5W-20. Both goods are 20-weight motor oils when used in normal conditions. However, if the car is still covered by warranty, employing 0W-20 might not be appropriate in your situation (see more below).
What happens if I use conventional oil rather than synthetic?
Since I’ve been working as a technician for eight years, I’ve always been told that switching from synthetic to traditional oil is not possible. I have witnessed the harm that returning to conventional causes. Is it accurate to say that switching back to conventional won’t harm your engine?
Answer
Although moving back and forth between fully synthetic and conventional oil won’t harm the engine, synthetic oils normally offer more protection than conventional lubricants. Naturally, this is based on the state of the engine at the time and the caliber of the regular oil being used.
If I don’t use synthetic oil, what happens?
Regular oil can be used following synthetic oil because they both have the same application. It’s a common fallacy that once you switch to synthetic oil, you can never go back to using traditional oil. There is a slight difference between these two sorts of oils. Both conventional and synthetic oils are created with lubricants to maintain a stable and smooth engine performance.
You might wonder what would happen if you used ordinary oil rather than synthetic. The health of the car will not be harmed by switching from synthetic to normal oil. You will only notice the altered engine performance as a noteworthy consequence. In terms of quality, synthetic oil far outperforms normal oil. As a result, the engine’s consistent performance will alter.
People believe it is impossible to switch from synthetic to ordinary fuel because the engine’s performance declines. Experts advise staying with synthetic oil rather than upgrading. This is because using synthetic oil will prolong the life and maintain the health of the engine in your car.
There are a few things to think about if you decide to go from synthetic to normal oil. Since you are introducing a whole new oil type to the engine, it is advised to switch gradually. To start, replace synthetic oil with semi-synthetic oil.
Making the switch from synthetic to semi-synthetic prepares the engine for regular oil. Later in the second phase, you can fully introduce the usual oil. As you switch the oil type, it is also advised to change the oil filter.
If you’re thinking about switching from synthetic to conventional car oil, it’s important to take your automobile model into account. When switching oil types, newer automobiles have the advantage. When transferring from one oil type to another, older models of automobiles may experience some leakage issues. Therefore, it’s crucial to speak with the vehicle’s manufacturer before changing the oil.
Can I combine ordinary and synthetic oil?
Whenever you have a crucial question regarding motor oil!
You’ve arrived at the proper location. Because Jiffy Lube is an oil expert. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.
How frequently should 0W 20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- Enhanced Protection for Performance and Turbocharged Parts
- increased protection against engine wear
- Better Performance at Low Temperatures
- Enhanced Protection at Higher Temperatures
- Synthetic Oil Maintains Cleaner Engines
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
Is 0W 20 only available in synthetic form?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.