I’m happy to see you carrying out some preventative maintenance! If you want to keep your ATV functioning properly for a long time, it is imperative that you take care of it.
For your motorcycle, Honda GN4 10W-30 4-stroke oil is a fantastic option. If you can’t find that, any 10W-30 or 10W-40 motorcycle oil will do.
Never use automobile oil in your Rancher, please. The clutch will slide and deteriorate more quickly than usual as a result.
Your Rancher’s oil should be changed according to Honda’s recommendations every 12 months, 100 hours, or 600 miles, whichever comes first.
Have fun four-wheeling, but have you considered your insurance before you head out onto the trails?
ATV insurance is offered by numerous auto insurance providers, including Progressive and Allstate. Jerry can assist you in comparing costs and coverages, and for the greatest savings, you may even combine your ATV and auto insurance policies.
Jerry is your all-star auto insurance agent for life. Jerry is an app, so there’s no need to sit across from him at a desk! After signing up, you’ll receive competitive rates from a wide range of leading suppliers in less than a minute. Save money with Jerry and don’t lose coverage.
In This Article...
A Honda Rancher 350 should be filled with what kind of oil?
NOTE: Watch out for the spring in the filter cover behind the filter popping out with the old filter. To help you install the replacement filter correctly, Honda labels which side of the oil filter faces out.
Step 8: Replace the oil filter cover, then hand-tighten the 8mm bolts. To prevent leaks, use your socket and ratchet to evenly tighten each screw.
NOTE: The spring beneath the oil filter may require some pressure to be applied to the lid in order to thread the 8mm bolts.
9. Use the fill port on the left side of the engine, which is located opposite the dipstick port on the right, to add Honda 10W-30 motor oil to the engine.
NOTE: The Honda Rancher 350 only requires slightly more than 2 quarts of oil, so start with that amount.
Step 10. After letting the engine run for a while, check the dipstick to determine the exact oil level. If necessary, top off the oil to the proper level.
How much oil does a Honda Rancher require?
Oil the engine once more. ADVICE: Despite Honda’s claims, we considered the Rancher 420’s 3 quarts of oil capacity to be a tad excessive. Replace the fill cap, add 2.5 quarts, let the engine run for a few minutes, and then check the level. Don’t screw in the fill cap before checking the oil level in the engine.
Do ATV oil and automobile oil differ from one another?
Right, it’s the same thing. The short answer is no. Compared to an automobile, the oil environment for ATVs and UTVs is much worse. ATV/UTVs have greater RPMs and run hotter. Therefore employ a common sump for the engine, clutch, and transmission, and they have a lower oil capacity.
How can the oil light on a 2004 Honda Rancher be reset?
For the majority of Honda four-wheelers, the reset technique is the same.
- Without starting the engine, turn the ignition on. Today’s Video
- To select the trip meter, press and hold the button.
- Keep holding down the “Reset” button.
- When the oil light goes out, let go of both buttons. you might enjoy. how to perform an MTD snowblower oil change.