All engines in the 2019 Honda Civic require 0w-20. This viscosity works best for the car because it appropriately cools and lubricates the engine. It is noted in the Honda Civic owner’s manual that there are some circumstances in which 5w-20 oil may be used. For instance, if no alternate product is offered, on a limited basis.
In This Article...
What kind of oil will work with a Honda Civic?
You need synthetic 0W-20 grade oil for your Honda Civic. The lower viscosity that synthetic oil can achieve is what the Honda engine requires to operate. Both conventional oil and mixed synthetic chemicals are not intended for use in your car.
Is synthetic oil required for Honda Civics?
- How You Drive Your Civic: Even in stop-and-go traffic, do you frequently idling your Civic? Don’t be natural. It’s because air flow is necessary for your engine to stay cool. Synthetic oil, as opposed to regular oil, might aid in keeping your engine cool while it is idle. If you utilize your Civic for activities other than commuting, like racing, synthetic oil is a wonderful alternative because it provides greater protection.
- Your engine’s age and condition: Synthetic oil contains uniform molecules, which makes it more likely to pass through engine rings and cylinder walls. You should continue using conventional oil if your engine is already prone to leaks and/or excessive oil usage. Why spend more money on synthetic oil if it would merely leak out more quickly?
- Where You Live: Because synthetic oil is considerably more adaptable than conventional oil in extremely cold and thin air, it works best if you live in a hot, cold, or high altitude climate.
- How Frequently You Drive Your Civic: If you don’t drive your Civic very often, synthetic oil will benefit you because traditional oil has a tendency to degrade quickly, even when not being used, whereas synthetic oil will last over time.
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- API Service SN that Saves Resources
- GF-5 ILSAC
- designed specifically for Honda and Acura automobiles
- Low volatility for less reliance on oil
- exceeds ILSAC GF-5 requirements for new car warranties
- Excellent thermal breakdown and viscosity resistance at high temperatures
- prevents the buildup of sludge and varnish
- reduces wear to extend engine protection
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- Excellent pumpability at low temperatures
Is 0W-20 equivalent to 5W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Utilize Hondas synthetic oil?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
Who manufactures Honda synthetic oil 0W20?
Idemitsu is a pioneer in the development of synthetic oils with lower viscosities, such as 0W-20.
Idemitsu and Honda teamed up to create a lower viscosity oil almost 20 years ago in order to improve the fuel efficiency of their hybrid automobiles. Honda started to fill their new Insight Hybrid at the factory with Idemitsu 0W-20 after extensive testing and refinement. Unique additives were utilized in this lower viscosity, higher quality synthetic oil to improve stability and decrease volatility—the traditional downsides of low-viscosity oil.
Honda soon started putting Idemitsu 0W-20 in non-hybrid vehicles in 2005. As soon as other automakers noticed, all the big Japanese brands swiftly followed suit. Nissan and Toyota both started utilizing it in 2006.
In 2010, Idemitsu introduced 0W-20 to the US. Since that time, it has been the factory-fill oil in countless American-made Honda, Toyota, and Nissan automobiles. Additionally, US automakers are increasingly considering 0W-20 as a feasible option in response to increasing regulatory pressure to improve fuel efficiency.
Therefore, why wouldn’t you choose Idemitsu Lubricants for your vehicle if these reputable manufacturers do?
Is a synthetic blend or full synthetic product preferable?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- easier to oxidize and acidify
- faster to degrade and lose protective properties
- Less stable chemically
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- safeguarding against extreme temperatures
- preventing sludge and deposit accumulation
- minimizing wear
- preventing oil deterioration
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.
How often should the oil be changed in a 2019 Honda Civic?
For standard oil, Honda advises changing your 2019 Honda Civic’s oil and filter every 3,000–5,000 miles. One of the most fundamental and natural procedures for your car is an oil change. Change synthetic oil every 7,500 to 10,000 miles regularly.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Better Performance at Low Temperatures
- Synthetic Oil Maintains Cleaner Engines
- Enhanced Protection at Higher Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
How frequently should 0W 20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
Is 0W 20 only available in synthetic form?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
What happens if I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
What happens if I substitute 0W-20 for 5W-20?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.