The Civic LX Hatchback has 16-inch alloy wheels with 215/55 R16 all-season tires on them. 235/40 R18 all-season tires are mounted on 18-inch alloy wheels on the Civic Sport Hatchback. The Civic EX-L Hatchback comes equipped with stylish 17-inch alloy wheels that are shod in 215/50 R17 all-season tires as standard.
In This Article...
What kind of tires fit a Honda Civic?
Which tire size fits a Honda Civic? Depending on the model level, the 205/55R16 or 215/40R17 tires are standard on the majority of Civics. Nevertheless, some of the sportier variants have bigger, more aggressive tire sizes, including 235/40R18 tires or even 245/30R20 tires.
Can my Honda Civic have larger tires?
You can select a different size and offset for your replacement wheels, but they must have the same bolt pattern as your factory-installed wheels. In general, we DO NOT advise getting a wheel that is wider or taller than your factory wheel by more than 2 inches.
Can a Honda Civic be fitted with 17 tires?
17.5″ wheels In this generation of Honda Civics, 17×8 wheels can be mounted flush or almost flush with offsets ranging from +45 to +35.
Are the wheels for the Honda Civic interchangeable?
It depends is the simplest way to respond to this query. The number of lugs and bolt pattern varies somewhat between each vehicle’s years. For instance, the 2006 Honda Civic will accept the wheels from a 2003 Honda Accord but not a 2005. Understanding bolt patterns and other aspects of wheel size when it comes to any vehicle is covered in more detail below.
What is Bolt Pattern?
When determining whether specific wheels will fit your car, the number of lugs is crucial. The most popular ones are 4-, 5-, 6-, and 8-lug. Simply counting the number of lugs on the wheels will get this figure. Once this has been established, the diameter between the bolts, which is typically stated in millimeters, must be measured. The distance between the two opposite bolts is measured. For a guide on how to calculate the distance based on the quantity of lugs on your wheel, see the illustration below.
What is the diameter of my wheels?
This only refers to the wheel’s overall size. For instance, if a wheel is specified as 17×8.5 +35, it has a 17-inch diameter. We shall discuss width and offset, the other 2 numbers, in more detail later. When turning a vehicle with larger wheels and tires, you must account for clearance to ensure that none of the other sections of the vehicle are touched. These must be done when the vehicle’s suspension is depressed and on the ground because it will behave significantly differently from when it’s on a jack and raised above the ground.
What is the width of my wheels?
A wheel’s width can be calculated by taking measurements from the inside of one wheel lip to the other, across the wheel. This is crucial for figuring out which tires will fit your wheels and whether the wheels will fit within the wheel wells.
What are my wheels offset?
The distance from the wheel’s center line to the mounting face’s back is known as the wheel offset. Wheel offset comes in three flavors: positive, zero, and negative. A hub mount for a wheel with a positive offset will be shallow and placed closer to the street side of the wheel. A hub mount with a zero offset will be positioned directly in the center of the wheel. A hub mount with a negative offset will be deeper and located closer to the rear of the wheel.
Which wheel sizes will fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
What is the price of 4 new tires for a Honda Civic?
The cost of a Honda Civic tire typically ranges from $150 to $350, however high-performance tires can cost well over $500.
How can the size of your tires be determined?
The outer and inner “walls on the sides of a tire are known together as a tire’s sidewall. There are three primary portions to the information on each sidewall, each of which is distinct:
Department of Transportation Safety Code
By doing this, you may be sure that your tire conforms with all DOT safety regulations. Your tire’s identification number, which starts with the manufacturer and plant code where the tire was made, appears after the DOT emblem (two numbers or letters). The tire’s production week is indicated by the ninth and tenth characters. The final number or numbers denote the year the tire was made.
The National Highway Traffic Safety Administration (NHTSA) created the Uniform Tire Quality Grading (UTQG) to evaluate tires using government-approved test procedures and grade each tire on three key factors:
Treadwear: This is the tire’s rate of wear, which is only comparable to tires from the same manufacturer. The starting point grade is 100. On the government’s plan, a tire with 200 would therefore theoretically last twice as long as a tire with 100.
Grades for traction are AA, A, B, and C. (with AA being the highest grade). They serve as a measurement on a predetermined government track of the tire’s ability to stop straight on wet pavement. For use on roads, tires with ratings lower than C are not suitable.
Temperature: The degrees of temperature are A, B, and C, from highest to lowest. These show how well the tire can dissipate heat during controlled indoor testing. Any tire with a C or lower rating is inappropriate.
The initials M and S (M +S) signify that the tire satisfies the requirements set forth by the Rubber Manufacturers Association for a mud and snow tire. There are three possible letter combinations for the letters: M+S, M/S, and M&S. These tires are all-season.
- Typically, those components include all the details about your tire’s size, characteristics, and recommended tire pressure.
- You can find this information on the tire information sticker on your driver’s side door or in the glove box of your car in the owner’s handbook.
A detailed explanation of the numbers and letters may be found under the “Find your tire size on your tire” link.
Which tire manufacturer does Honda use?
One of the most reputable brands in the world, Honda has a long history. Honda’s success has been largely attributed to its lineup’s diversity, which includes coupes, sedans, hybrids, CUVs, SUVs, and trucks. Choose Bridgestone when it comes to your Honda tires.
For your Honda tires, whichever model you drive, Bridgestone is the best option. Potenza tires are designed for speed and give control, reactivity, and remarkable handling if you’re seeking for high performance. For Honda drivers who prefer a smooth ride, Turanza tires are the best option. Our Ecopia series offers all-season performance, a comfortable ride, and improved fuel efficiency for your Honda. For your Honda vehicle or SUV, Dueler tires work to maximize strength and durability so you can traverse rough terrain. In the event of a puncture, our DriveGuard run-flat tires are designed to keep you moving for up to 50 miles at a speed of up to 50 mph. You’ll want Blizzak for your Honda tires when it’s cold outside and the worst of the winter driving conditions are here.
Bridgestone tires are equipped with the technology to meet your needs. To locate the ideal set of tires for your Honda vehicle, truck, or SUV, check out our tire catalog.
* The degree of tire damage, the quantity of pressure loss, and the driving environment all affect how easily DriveGuard tires can be repaired. For further information, speak to a Bridgestone dealer.