What Size Tires Are On A Honda 300 Fourtrax?

Honda produced the revolutionary, high-performance FourTrax 300 44 (or TRX300FW) ATV from 1988 until 2000. It had a 282-cc air-cooled four-stroke mono-cylinder engine, was capable of incredible hauling, had a top speed of 45 mph, and had 20 horsepower. It replaced the 1986 FourTrax brand-making TRX250X, a 246-cc sport model with a five-speed transmission and adjustable suspension.

The Honda FourTrax, which was available in two variations, was the company’s highest-selling utility vehicle.

What size ATV tires come stock?

Understanding how to read tire sizes is just the beginning. You must learn how to use them properly. Is a quad’s appropriate diameter 26 inches? What size width do you require?

Tire Diameter Breakdown

Make sure you purchase tires that will actually fit on your stock vehicle when you’re thinking of replacing all of your tires.

The average ATV tire diameter falls between 20 inches for the smallest machines and 30 inches for the more heavily equipped manufacturer mud-fitted models.

Your quad will essentially fall into one of only a few categories:

  • quads for sports 20 to 25 inches
  • Factory-built 27 to 30 inch quads with mud or rock equipment
  • 24 to 28-inch utility quads

Remember that you should stay within a few inches of your factory tire size. You’ll start to rub on your fenders if you go too big (among other issues). If you choose to go smallwell, that is absurd.

Tire Width Breakdown

It’s simpler to grasp tire width. The best tire width for you will depend much on your riding style and personal preferences.

You typically get a flatter tread pattern and higher traction with a wider tire. You have a little bit more control with a skinny tire.

To get the most out of both tires, ATVs typically feature a wider tire on the back than the front. On a quad, the front tire is typically 7 to 8 inches wide, while the rear tire is often 10 to 11 inches wide.

You should take other factors into account in addition to adjusting your tire width to your riding style. Additionally, you must confirm that it will fit snugly on the wheel of your choice. There are two major methods for ensuring that it will fit.

  • Check the recommended wheel size from the tire manufacturer. They ought to list a selection of wheel widths that the tire is compatible with.
  • If you can’t discover that information, the usual recommendation is to choose wheels that are about two inches narrower than the width of your tire. This is a general recommendation, so it may not apply to all tires, but based on our experience, it usually does.

Wheel Diameter Breakdown

This one cannot be negotiated. The wheel diameter of your tire must match the diameter of your real wheel.

Since most off-road tires are made to fit those wheels, the majority of off-road wheels typically have a diameter of 10 to 12 inches. This is an excellent tire size because it provides ample of cushion between the tread and rim, resulting in smoother rides and more rim protection.

Of course, if you have bigger tires, you’ll wind up with bigger wheels, but that’s where we’re getting ahead of ourselves.

Are the bolt patterns on all Honda ATVs the same?

Honda: All non-sport ATVs and SxSs, save the Pioneer 1000 and Talon, are 4/110. The bolt pattern is 4/137.

With the exception of the 2019 YXZ, which has a 4/156 bolt pattern, all non-sport and contemporary ATVs and SxSs employ a 4/110 bolt pattern.

Are wheels made by Honda and Yamaha interchangeable?

Finally, the main event! We recently learnt about various bolt patterns and how to correctly measure them. Now that we have that settled, let’s address the question in the title: Do Yamaha and Honda Use the Same Bolt Pattern? The quick response is yes, they do. Most Yamaha ATVs and Honda vehicles follow the well-liked 4/110 pattern. So go ahead and evaluate the pattern of your ride.

It’s a match made in heaven if it is a 4/110 and goes with the wheels you wish to purchase! However, I want to emphasize one more that not all Hondas and Yamahas use the 4/110 pattern. This is particularly true for some earlier models, from a time when both brands experimented heavily with wheels, lugs, studs, and everything in between. However, you won’t often need to worry about any of that.

This is crucial: if there is a beautiful wheel out there that is reasonably priced but does not fit the hub on your Yamaha ATV, there is a fix. It’s referred to as an adaptor ring, and after you attach it to the hub, the pattern changes to fit that wheel.

How can I increase the speed of my Honda Fourtrax 300?

Here are The Best Techniques For Speeding Up Your ATV.

  • Improve Your Fuel.
  • Better Air Filter.
  • Throttle limiter screw adjustment
  • Modify tire weight, size, and pressure.
  • Add A Kit For Nitrous.
  • Exhaust system upgrade.
  • Gear Ratio should be changed.
  • Place a Big Bore Kit in place.

Can you use stock ATV rims with larger tires?

It’s important to keep in mind that the manufacturer selected the stock tire size particularly to meet the engine size, suspension geometry, driveline strength, and gearbox setup of that ATV model when you’re thinking about converting to larger tires.

Larger tires will throw the carefully calculated ratios between these parts out of balance, which could lead to decreased overall performance, premature wear, or even component failure all at once.

Most ATVs can accommodate tires that are one to two inches larger in diameter than the factory tires without requiring any modifications. However, even larger tires frequently need to be modified to avoid rubbing, torque loss, early driveline and drive belt wear, and the proper offset gear ratio.

In other words, if your factory tires are 26 inches in diameter, adding a 27 inch tire and possibly a 28 inch tire as well shouldn’t present any major problems that necessitate major modifications.

You are therefore better off staying as close to the standard tire diameter as possible if you want to improve off-road performance without spending a fortune on pricey modifications and improvements.

But what if you want to take it a step further? What potential problems would you encounter, and how would you handle them?

Why are the front tires of ATVs smaller?

Maybe you’re considering getting new ATV tires, or maybe you just observed that the front and rear tires are different when riding. They typically have the same diameter and height, although their width can differ.

ATV tires normally have the same height in the front and back, but have narrower front tires. An ATV’s narrower front tires boost mobility while reducing tire rubbing. The bigger rear tires also improve stability and traction, which improves performance and safety.

To be clear, while referring to the “smallness of the ATV front tires,” we are referring to the width measurement and how this affects the vehicle’s overall performance. It’s interesting to note that, despite the possibility, it is uncommon to have ATV tires of the same size on the front and back due to the numerous advantages of the staggered wheel layout. Learn more about the benefits of having smaller front tires for ATVs as well as the significance of ATV tire size by reading on.

How long do the tires on ATVs last?

Your ATV tires are not intended to endure indefinitely. Even the toughest, most specialized tires will eventually need to be replaced. But when it comes to our quads, most of us don’t have an unlimited budget, and tires are a significant expense (as much as we would love to).

ATV tires, regrettably, have no predetermined lifespan or mileage restrictions. Your tires can last from a year to five years, depending on the terrain you ride on and how frequently you ride (or longer). So how do you know when it’s time to eventually break down and get a new set?

Can my ATV have smaller tires?

However, the prerequisite will differ depending on the ATV in question. The majority of manufacturers, including Yamaha and Polaris ATVs, often leave adequate leeway for tire sizes to be increased by at least one size and maybe even two. Make sure that the plastic components, shocks, or exhaust are not rubbed by the new tires.

What has a bolt pattern of 4×110?

The 4×110 bolt pattern is most frequently linked with ATVs, and for good cause, let’s face it. There are models from the most well-known ATV manufacturers, including Honda, Suzuki Can Am, Polaris, Kawasaki, and Arctic Cat, that ride on 4×110 bolt pattern wheels.

Can a RZR ride on Polaris Ranger wheels?

Even while many folks had their doubts about fitting RZR wheels into their Rangers, many others supported the concept. Fortunately, it turned out that RZR wheels can fit your Ranger just well.

You should be aware that RZR wheels don’t always fit a Ranger. You’ll discover that the tires are substantially smaller and have less clearance than the factory wheels in the majority of vehicle and wheel models.

The wheels may rub against the suspension components if you utilize those two together, but you can still drive your car without any problems. The rubbing will typically be so faint that you might not even realize it.

However, if you steer your car too strongly to the left or right through sharp turns, the friction will be more noticeable.