My friend from out of state came to see me. He wanted to ride our motorcycles and four-wheelers around my city and for a while.
He checked off items on a pre-ride checklist as soon as he got here to make sure everything was prepared for our journey. He saw that his quad needed more oil, so he inquired if I knew of any motorcycle shops around where he could buy some ATV oil.
He should use the Mobile 1 synthetic motor oil I gave him. It’s not the same, he claimed, so he couldn’t.
Since I’ve spent the majority of my life riding four-stroke motorcycles and ATVs, I was unaware that the oil was different. I’ve only ever used 10w-40 designed for automobiles.
I added it to my article list and started searching for a solution, just like I do with every question that is posed. Here’s what I discovered:
If necessary, you can use automotive oil in an ATV or UTV. However, it’s not always advised. If you must, synthetic car oil in the weight of 10w-40 is your best choice. Your best bet is to use oils designed specifically for ATVs, motorcycles, and UTVs because they are designed to safeguard those smaller engines.
In This Article...
What is the ideal ATV oil?
Traditional automotive motor oils typically have a viscosity of 10W-30 or 5W-20, whereas Polaris, for example, employs a viscosity of 5W-50 for their off-road engines.
Will 10W30 work in my ATV?
You should treat it with respect. The engines are constructed to maximize the performance of the selected viscosity. According to the start temperature, 0W30, 5W30, or 10W30 would be suitable options because the manufacturer in the aforementioned example guideline demands grade 10w30.
A Honda 420 holds how much oil?
ADVICE: Despite Honda’s claims, we considered the Rancher 420’s 3 quarts of oil capacity to be a tad excessive. Replace the fill cap, add 2.5 quarts, let the engine run for a few minutes, and then check the level. Don’t screw in the fill cap before checking the oil level in the engine.
Honda advises using synthetic motor oil?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
Should I use Honda oil?
Do you have to use fluids from the Honda brand? Yes is the clear-cut response. Corrosion is the key, and Honda fluids are the best fluid to reduce corrosion and keep your Honda dependable.
Do Hondas require 100% synthetic oil?
According to Mel Yu, a car analyst for Consumer Reports, Honda is not alone. About 70% of new automobiles for the 2019 model year come with 100% synthetic or mixed oil.
Although some companies, like Honda, don’t specifically ask for synthetics in their engines, Yu notes that the low-viscosity lubricants those engines need are only available in synthetic form. Some companies employ “synthetic mix oil,” which combines synthetic and conventional oils. Blends are far less expensive but don’t offer all the advantages of synthetics, he continues.
Additionally, a lot of places that replace oil also sell synthetic oil as a substitute for regular engine oil.
The 2018 National Oil and Lube News annual study, according to Will Hixson, spokesman for the Automotive Oil Change Association, reveals that more than half of car owners select synthetics or synthetic mixes when they get their oil changed.
Does using synthetic oil make sense? The decision to is a good one, but only if your car has particular requirements.
Synthetic motor oil has some benefits over regular motor oil. They are intended to be more successful at:
preventing oil deterioration, allowing it to last longer than regular oil
How frequently should a four-wheeler have its oil changed?
How frequently should the oil be changed should be your first concern. The reply is that it varies according to your ATV. Generally speaking, you should change the oil in your ATV once a year, or every 100 hours of use. To learn more about your particular ATV, though, make sure to consult your owner’s manual. As you read the instructions, make a note of the recommended oil and filter types and purchase them. Don’t just assume what you should get; utilize the necessary ATV oil change supplies if you want to maintain your vehicle operating properly. Consult your owner’s handbook for guidance on this choice.
What kind of oil can be used in a 125cc ATV?
Regular 4-Stroke oil, such as 10W30, 10W40, or 15W40, is used in ATVs. After roughly an hour of use, when it has broken in, you can switch back to synthetic oil.
What about Lucas oil for ATVs?
Long-lasting oil that can withstand the high temperatures of slow-moving, hard-working air-cooled engines is Lucas Semi-Synthetic SAE 10W-40 ATV Engine Oil. It meets JASO requirements and goes beyond manufacturer specs.
Can I put 10W40 in my ATV instead of 10W30?
Along with 15W-40, 5W-30, and 0W-20, SAE 10W-30 motor oil is one of the low-temperature multi-grade oils that manufacturers frequently suggest. In cold weather, this engine oil performs as an SAE 10, whereas in normal operating conditions, it performs as an SAE 30. This type of oil won’t have any issues in subfreezing temperatures up to -30C/-22F. Even if you leave your wheeler outside the garage, cold-starting should be simple.
Similar to this, SAE 10W-40 motor oil works well in chilly climates. It performs better in higher temperatures but has the same low-temperature limitations as the 10W-30. When compared to an SAE 30 high-temp flow grade, this oil type remains thicker at 100C/212F and is more suited for warm climates. This oil’s higher glutinous content makes it more resistant to heat breakdown and less likely to develop deposits.
Low-viscosity oil grades 10W-30 and 10W-40 both contain polymers that, depending on changes in oil temperature, speed up or slow down the pace at which engine oil thickens or thins. Both of these can be found in their purest conventional form or in premium synthetic grades. For summer use, either 10W30 or 10W40 is OK, while 10W-40 motor oil will better safeguard your engine.