NOTE: Watch out for the spring in the filter cover behind the filter popping out with the old filter. To help you install the replacement filter correctly, Honda labels which side of the oil filter faces out.
Step 8: Replace the oil filter cover, then hand-tighten the 8mm bolts. To prevent leaks, use your socket and ratchet to evenly tighten each screw.
NOTE: The spring beneath the oil filter may require some pressure to be applied to the lid in order to thread the 8mm bolts.
9. Use the fill port on the left side of the engine, which is located opposite the dipstick port on the right, to add Honda 10W-30 motor oil to the engine.
NOTE: The Honda Rancher 350 only requires slightly more than 2 quarts of oil, so start with that amount.
Step 10. After letting the engine run for a while, check the dipstick to determine the exact oil level. If necessary, top off the oil to the proper level.
In This Article...
How much oil does a Honda Rancher require?
Oil the engine once more. ADVICE: Despite Honda’s claims, we considered the Rancher 420’s 3 quarts of oil capacity to be a tad excessive. Replace the fill cap, add 2.5 quarts, let the engine run for a few minutes, and then check the level. Don’t screw in the fill cap before checking the oil level in the engine.
What symptoms indicate a low transmission fluid level?
While you wait, it’s a good idea to become aware with the warning indications that your transmission fluid may be running low.
- Noises.
- Burning odor
- Leaky transmissions.
- Gears That Slip.
- Slow Engagement of Gears.
- Poor Vehicle Acceleration
- The warning light for the check engine or transmission is on.
Are there transmission fluids on four-wheelers?
Since the transmission is a part of the engine in some ATV and UTV models, the same oil will be used in both. Others, however, have a separate transmission that calls for a different type of oil. You should always check the level of your gearbox oil before a ride, just like you would with the engine oil.
When should I change the oil in my ATV?
How frequently should the oil be changed should be your first concern. The reply is that it varies according to your ATV. Generally speaking, you should change the oil in your ATV once a year, or every 100 hours of use. To learn more about your particular ATV, though, make sure to consult your owner’s manual. As you read the instructions, make a note of the recommended oil and filter types and purchase them. Don’t just assume what you should get; utilize the necessary ATV oil change supplies if you want to maintain your vehicle operating properly. Consult your owner’s handbook for guidance on this choice.