NOTE: The black grommet on the oil filter should face you as you install it because it is directional.
Step 9: Replace the oil filter cover and tighten the bolts using an 8mm socket.
Although there isn’t a set torque here, you shouldn’t overtighten them.
Step 11: Replace the dipstick and start the engine. This will circulate the oil and allow you to check the level. To do this, take the dipstick off, clean the oil off of it, and then set it on the crankcase without tightening it. If more oil is needed, top it off, and you’re done.
For all versions of Honda ATVs, the procedure for changing the oil is the same or very similar. However, you may view the Honda Rancher 350 oil change video below if you want to see how this task is carried out on a different make and model.
In This Article...
What sort of oil is used by ATVs?
This can be one of the trickier ATV-related subjects when it comes to oil. To someone who is unfamiliar with the ATV oil industry, there would be a lot to learn about when it comes to certifications, friction, and clutches. To help you obtain a clearer response, I have addressed a few common queries about ATV oil below. I hope this clarifies the fundamentals for you.
Can You Use Regular Motor Oil in an ATV?
Regular engine oil should not be used in an ATV. The more complex friction ratings required by your ATV won’t be met by regular motor oil, which is designed for cars and trucks. It is recommended to use ATV-specific oil, or at the very least oil that is similar to ATV-specific oil.
The above list of suggested ATV-specific lubricants includes Honda GN4 Motoroil, YamaLube OEM 4 Stroke, Valvoline for ATV/UTV, and Lucas Oil 10720. Before using a certain kind of oil on your ATV, make sure to check for the required oil rating (JOSA MA, JOSA MA2, or JOSA MB).
Can I Use Synthetic Oil In My ATV?
For your ATV, synthetic oil is frequently the best option. If you use your ATV frequently, synthetic oil will help it run as smoothly as possible. Higher temperatures don’t harm synthetic oil as much, and it maintains its cleanliness longer. If you ride more than once a week, you won’t need to change your oil as frequently.
You have the final say on whether to use synthetic or non-synthetic oil in your ATV. However, you should take into account that synthetic is advised and will ultimately provide you with the greatest outcomes. It is unclear why you would make a different decision given that it can help your ATV maintain its peak performance level.
How much oil is required by a four-wheeler?
It will say engine oil and 2.6 US quarts under specs. Find the appropriate funnel that fits the hole and add the required quantity of oil to this gray cap.
Is GN4 artificial?
Did you know that when Honda released the first GN4 back in 1975, it established the benchmarks for motorcycle oils? The best value for money is provided by this motor oil if you own a light-duty Honda motorcycle.
The Pro Honda GN4 is a mineral oil with a petroleum basis that is designed for light-duty use in 4-stroke scooters, ATVs, and motorcycles. This is not the proper oil for you if you like to race in your Honda. You require the Pro Honda HP4S for that.
The initial motorcycle oil created especially for motorcycles is called ThePro Honda GN4. The mixture includes a special additive package that goes above and beyond what is needed for motorcycles with a shared engine and tranny sump configuration.
The GN4 now offers improved shear resistance, more consistent viscosity, and a cleaner burn thanks to further development.
Your motor will shift smoother right away if you previously used synthetic oil in your vehicle and opt to switch to the Pro Honda GN4. Additionally, it will be much quieter. This is especially true if your Honda’s service manual specifically suggests the GN4.
For high-performance motorcycles, there are once more superior oils. However, if you’re a casual rider and your motorcycle advises using a premium mineral-based oil, you can’t go wrong with the Honda Pro GN4.
A Honda Rancher has an oil filter, right?
In our Rancher front crankcase cover schematic, the filter is labeled as #4 and is located on the right side of the engine. Get a rag below it so you won’t make a mess if some oil leaks out. Pull the filter out after removing the three 8mm bolts that secure the lid to the filter.
Will 10w30 work in my ATV?
You should treat it with respect. The engines are constructed to maximize the performance of the selected viscosity. According to the start temperature, 0W30, 5W30, or 10W30 would be suitable options because the manufacturer in the aforementioned example guideline demands grade 10w30.
Use 10W30 or 10W40, please?
Yes, to answer briefly. You can use either oil without any risk because they are both designed to operate equally well. Viscosity and base oil are two aspects of the two oils that differ from one another.
Viscosity describes how fluids move via pipes. A fluid is more difficult to move via a pipe or an engine the greater the viscosity value. The viscosity of an oil is inversely proportional to its thickness; in general, thicker liquids have lower viscosities than thinner liquids.
The heat index value indicates how effectively these oils flow at operational temperatures and during hot weather. The ability of a particular type of FZPNP or API Certified engine oil to keep your car’s components from being harmed by excessive pressure and high-temperature variations will depend on how highly rated it is.
The thickness at operating temperatures of the oils is the only distinction between 10W30 and 10W40. Since both formulations have a viscosity of “10 when reacting with air or other gases, they will both flow equally effectively at cold starts (surplus).
Use 10w30 oil to hasten the warming up of your engine. As it chills down with a lot less energy than standard oils do on hot summer days while they’re overheating, this will lessen the high temperatures and drag caused by cold weather.
This winter, replace your vehicle’s old high-performance fluids with new ones that are made specifically for these seasons to ensure that it runs smoothly.
You’ll immediately notice a difference in the acceleration time, allowing us to return to our cars without incident after spending the entire day outside. Whether something happened while I was simply going down the street or whether I had been traveling too far from home.
Summer is not the appropriate season to use 10w40 oil if you wish to prevent metal-on-metal contact between moving parts. It’s vital to keep our cars cool with a yearly tune-up as in hot temps even light greases might start melting and running out of control.
It’s a good idea to start with the proper fluids when you’re prepared for some winter driving.
Unless we have snowy circumstances, 10w30 is perfectly suitable for the summer and will help keep everything running smoothly throughout the entire season (which would be bad news).
The base oil lubricates moving parts in your car’s engine and makes an oil useful for lubricating them. Petroleum distillates are included in 10W30 while synthetic base oils including polyalphaolefin (PAO) and synthetic mineral oils are present in 10W40 (SMO). Although the physical characteristics of these two oils differ, they both have comparable chemical bases and behave similarly in your engine.
What is the ideal ATV engine oil?
Traditional automotive motor oils typically have a viscosity of 10W-30 or 5W-20, whereas Polaris, for example, employs a viscosity of 5W-50 for their off-road engines.
How frequently should four-wheeler oil be changed?
How frequently should the oil be changed should be your first concern. The reply is that it varies according to your ATV. Generally speaking, you should change the oil in your ATV once a year, or every 100 hours of use. To learn more about your particular ATV, though, make sure to consult your owner’s manual. As you read the instructions, make a note of the recommended oil and filter types and purchase them. Don’t just assume what you should get; utilize the necessary ATV oil change supplies if you want to maintain your vehicle operating properly. Consult your owner’s handbook for guidance on this choice.
Should I run my ATV with synthetic oil?
My friend from out of state came to see me. He wanted to ride our motorcycles and four-wheelers around my city and for a while.
He checked off items on a pre-ride checklist as soon as he got here to make sure everything was prepared for our journey. He saw that his quad needed more oil, so he inquired if I knew of any motorcycle shops around where he could buy some ATV oil.
He should use the Mobile 1 synthetic motor oil I gave him. It’s not the same, he claimed, so he couldn’t.
Since I’ve spent the majority of my life riding four-stroke motorcycles and ATVs, I was unaware that the oil was different. I’ve only ever used 10w-40 designed for automobiles.
I added it to my article list and started searching for a solution, just like I do with every question that is posed. Here’s what I discovered:
If necessary, you can use automotive oil in an ATV or UTV. However, it’s not always advised. If you must, synthetic car oil in the weight of 10w-40 is your best choice. Your best bet is to use oils designed specifically for ATVs, motorcycles, and UTVs because they are designed to safeguard those smaller engines.