What Oil Does A 2017 Honda Civic Use?

Depending on the model you choose, there are a number of engine sizes available for the 2017 Honda Civic. There are three different turbocharged four-cylinder engines available: two 1.5L four-cylinder engines, a 2.0L four-cylinder engine, and the conventional 2.0L (122 ci) engine.

The full-synthetic 0W-20 motor oil is the suggested oil type for each engine in the 2017 Civic. The 2.0L models’ capacity is 5.7 quarts, compared to 3.4 quarts for 1.5L (91 ci) variants.

Never forget to consult the original owner’s handbook of your automobile for more details on the proper oil to use. Any authorized Honda service expert will be knowledgeable enough about your car to know which oil is appropriate for it.

What kind of oil is suitable for the Honda Civic?

You need synthetic 0W-20 grade oil for your Honda Civic. The lower viscosity that synthetic oil can achieve is what the Honda engine requires to operate. Both conventional oil and mixed synthetic chemicals are not intended for use in your car.

Tools Needed:

Now you may install the engine oil funnel where your oil cap threads by grabbing it from the package. You can pour oil into the funnel fast because of its wide design without worrying that it may run over the top. Simply place the 1 quart bottles of fresh oil upside down in the funnel and allow the liquid to drain in while you open the next container.

Add the recommended oil amount from the manufacturer. It is 3.7 qts for the 1.5L. It is 4.4 qts for the 2.0L.

Check the dipstick after adding this amount of oil to see whether you are close to the recommended level. When in doubt, it is preferable to add oil gradually and check frequently as opposed to overfilling.

Remove the funnel once the dipstick’s reading is accurate. You can clean it by wiping it with a rag.

Motivx Pro Tip: After turning on your Honda, let it run for a short while to develop oil pressure and fill the oil filter. When the dipstick reaches the full mark, turn off your engine and fill off the oil.

Can synthetic oil be used in Honda Civics?

No, synthetic oil won’t harm your engine, unlike what many people think. However, it used to be accurate. Esters, which are chemical components that would wear down the seals in ancient engines, were present in the first synthetic oil when it was initially introduced decades ago. However, you no longer need to be concerned with esters wrecking havoc on your old engine seals thanks to continually advancing synthetic oil technology.

The bottom conclusion is that your older Honda Civic engine is now fully safe to use synthetic oil!

Your Owner’s Manual

Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.

Location

Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:

  • If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
  • In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.

Viscosity

The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.

Quality Testing

Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.

The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.

Manufacturer Requirements

If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.

Fuel Economy

Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.

What is engine oil 0W-20?

A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.

In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.

Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.

How frequently should a 2017 Honda Civic have its oil changed?

One of the most essential and important procedures for your car is an oil change. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. For standard oil, Honda advises replacing your 2017 Honda Civic’s oil and filter every 3,000–5,000 miles.

How much does a Honda Civic oil change cost?

An oil change for a Honda Civic typically costs between $98 and $111. Between $39 and $49 is the expected cost of labor, and between $59 and $62 is the estimated cost of parts.

How can the oil life on a 2017 Honda Civic be reset?

You are in charge of resetting the oil life sensor after changing the engine oil in your CR-V. Failure to do so will result in the CR-V system reporting inaccurate data, which could later cause major mechanical problems.

Your Honda CR-oil V’s life reset is a straightforward procedure. This is how you do it for the 2018 and 2019 models.

For Models With Driver Information Interface

Scroll until you find Maintenance Minder if your model has this interface. After that, scroll through the maintenance options until you find the one you want to reset, then hold the Enter button down for up to 10 seconds.

For Models With the Information Display

Once the engine oil life choice displays, you must continue to hold down the TRIP knob from the instrument panel until the display begins to blink. After that, turn the knob for a little while to reset the display to its maximum brightness.

For Models With Display Audio

Select Settings from the Home screen, then select the Maintenance Info option. Select Reset Items and then choose the items you want to reset from the list.

For Older Models

You must turn the ignition to the first position on vehicles manufactured between 2007 and 2017 without starting the engine. Once Engine Oil Life is displayed, press the Trip stem to toggle it, then keep it there for 10 seconds until the display begins to flicker. Hold the stem for a further five seconds to complete the oil life reset.

Honda advises using 100% synthetic motor oil?

Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.

Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.

For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.

0W-20 oil: is it synthetic?

High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.

Do Hondas require 100% synthetic oil?

According to Mel Yu, a car analyst for Consumer Reports, Honda is not alone. About 70% of new automobiles for the 2019 model year come with 100% synthetic or mixed oil.

Although some companies, like Honda, don’t specifically ask for synthetics in their engines, Yu notes that the low-viscosity lubricants those engines need are only available in synthetic form. Some companies employ “synthetic mix oil,” which combines synthetic and conventional oils. Blends are far less expensive but don’t offer all the advantages of synthetics, he continues.

Additionally, a lot of places that replace oil also sell synthetic oil as a substitute for regular engine oil.

The 2018 National Oil and Lube News annual study, according to Will Hixson, spokesman for the Automotive Oil Change Association, reveals that more than half of car owners select synthetics or synthetic mixes when they get their oil changed.

Does using synthetic oil make sense? The decision to is a good one, but only if your car has particular requirements.

Synthetic motor oil has some benefits over regular motor oil. They are intended to be more successful at:

preventing oil deterioration, allowing it to last longer than regular oil

Can I Use 0W-20 Instead Of 5W-20?

The thin oil viscosity grade 0W-20 is frequently used in freezing temperatures. Diesel and gasoline engines are often advised to use it for cold starts and reduced oil usage.

Similar in viscosity to 0W-20 and suitable for low-temperature environments, 5W-20 has a little thicker oil viscosity than 0W-20.

While switching back and forth between the two may not immediately harm your engine, it will have a negative impact on your oil change schedule and overall engine performance over time.

Therefore, unless absolutely necessary, you shouldn’t change your oil’s viscosity from that suggested by the manufacturer of your vehicle.

Can I Mix 0W-20 And 5W-20 Oil?

One thing to note is that SAE 0W oil is usually synthetic. 5W-20 may be conventional, synthetic, or a blend of both. Even if both of your oils are totally synthetic, combining them may still have an impact on how much gas your car uses and how efficiently it uses that gas.

It’s also possible that the additives in your 0W-20 and 5W-20 oils are incompatible with one another, such as viscosity modifiers and corrosion inhibitors. It is therefore better to avoid combining or switching them.

Are 0W-20 And 5W-20 Available As Synthetic Oil?

The base oils and additives in 0W SAE oils are always synthetic or semi-synthetic. Due to their decreased viscosity, these oils must be extremely dependable in freezing weather environments.

The behavior of conventional oil can vary and it degrades very quickly. In order to ensure that 0W-20 oil will flow in freezing temperatures, it typically contains a base oil that is either entirely synthetic or semi-synthetic.

Since 5W-20 is also available as conventional oil, it has a slightly greater viscosity level and is therefore more adaptable in terms of oil types.

However, the conventional and synthetic versions of this oil have noticeable variances. Better still is 5W-20 synthetic motor oil, which has longer oil change intervals and better fuel economy.