5 Quart SYNTEC Synthetic Motor Oil, 0W-20.
In This Article...
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- Excellent thermal breakdown and viscosity resistance at high temperatures
- reduces wear to extend engine protection
- exceeds ILSAC GF-5 requirements for new car warranties
- designed specifically for Honda and Acura automobiles
- prevents the buildup of sludge and varnish
- Low volatility for less reliance on oil
- Excellent pumpability at low temperatures
- Resource conservation to safeguard emissions systems and improve fuel efficiency
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
How often should an oil change be performed on a 2014 Honda Accord?
One of the most essential and crucial procedures for your car is an oil change. Honda advises changing the oil and filter in your 2014 Honda Accord every 3,000 to 5,000 miles, but it’s best to check your owner’s handbook and with your dealer to find out the intervals that work best for your car.
What is engine oil 0W-20?
A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.
In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.
Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.
Is 5w30 a viable alternative to 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
When was 0w20 released?
Idemitsu is a pioneer in the development of synthetic oils with lower viscosities, such as 0W-20.
Idemitsu and Honda teamed up to create a lower viscosity oil almost 20 years ago in order to improve the fuel efficiency of their hybrid automobiles. Honda started to fill their new Insight Hybrid at the factory with Idemitsu 0W-20 after extensive testing and refinement. Unique additives were utilized in this lower viscosity, higher quality synthetic oil to improve stability and decrease volatility—the traditional downsides of low-viscosity oil.
Honda soon started putting Idemitsu 0W-20 in non-hybrid vehicles in 2005. As soon as other automakers noticed, all the big Japanese brands swiftly followed suit. Nissan and Toyota both started utilizing it in 2006.
In 2010, Idemitsu introduced 0W-20 to the US. Since that time, it has been the factory-fill oil in countless American-made Honda, Toyota, and Nissan automobiles. Additionally, US automakers are increasingly considering 0W-20 as a feasible option in response to increasing regulatory pressure to improve fuel efficiency.
Therefore, why wouldn’t you choose Idemitsu Lubricants for your vehicle if these reputable manufacturers do?
Honda advises using 100% synthetic motor oil?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
Can I Use 0W-20 Instead Of 5W-20?
The thin oil viscosity grade 0W-20 is frequently used in freezing temperatures. Diesel and gasoline engines are often advised to use it for cold starts and reduced oil usage.
Similar in viscosity to 0W-20 and suitable for low-temperature environments, 5W-20 has a little thicker oil viscosity than 0W-20.
While switching back and forth between the two may not immediately harm your engine, it will have a negative impact on your oil change schedule and overall engine performance over time.
Therefore, unless absolutely necessary, you shouldn’t change your oil’s viscosity from that suggested by the manufacturer of your vehicle.
Can I Mix 0W-20 And 5W-20 Oil?
One thing to note is that SAE 0W oil is usually synthetic. 5W-20 may be conventional, synthetic, or a blend of both. Even if both of your oils are totally synthetic, combining them may still have an impact on how much gas your car uses and how efficiently it uses that gas.
It’s also possible that the additives in your 0W-20 and 5W-20 oils are incompatible with one another, such as viscosity modifiers and corrosion inhibitors. It is therefore better to avoid combining or switching them.
Are 0W-20 And 5W-20 Available As Synthetic Oil?
The base oils and additives in 0W SAE oils are always synthetic or semi-synthetic. Due to their decreased viscosity, these oils must be extremely dependable in freezing weather environments.
The behavior of conventional oil can vary and it degrades very quickly. In order to ensure that 0W-20 oil will flow in freezing temperatures, it typically contains a base oil that is either entirely synthetic or semi-synthetic.
Since 5W-20 is also available as conventional oil, it has a slightly greater viscosity level and is therefore more adaptable in terms of oil types.
However, the conventional and synthetic versions of this oil have noticeable variances. Better still is 5W-20 synthetic motor oil, which has longer oil change intervals and better fuel economy.