Extended Performance of Mobil 1 5 quarts of High Mileage 0W-20 Full Synthetic Motor Oil (Part No. 15019)
In This Article...
How much synthetic oil does a 2011 Honda Accord use?
Beginning with the 2011 models, the majority of new Honda vehicles will ship from the manufacturer using 0w-20 synthetic oil developed by Honda.
Can I substitute 0W-20 oil for 5w20 oil?
My car is intended to use 5W-20 motor oil, a reader writes. I unknowingly purchased 0W-20 and changed my oil without realizing it. Is it okay to keep using the 0W-20?
Our response: 0W-20 is typically a completely suitable replacement for 5W-20. Both goods are 20-weight motor oils when used in normal conditions. However, if the car is still covered by warranty, employing 0W-20 might not be appropriate in your situation (see more below).
Is 5w30 a viable alternative to 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Honda advises using synthetic motor oil?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
What is engine oil 0W-20?
A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.
In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.
Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- Excellent pumpability at low temperatures
- Excellent thermal breakdown and viscosity resistance at high temperatures
- reduces wear to extend engine protection
- designed specifically for Honda and Acura automobiles
- exceeds ILSAC GF-5 requirements for new car warranties
- Low volatility for less reliance on oil
- prevents the buildup of sludge and varnish
- Resource conservation to safeguard emissions systems and improve fuel efficiency
Who manufactures Honda synthetic oil 0w20?
Idemitsu is a pioneer in the development of synthetic oils with lower viscosities, such as 0W-20.
Idemitsu and Honda teamed up to create a lower viscosity oil almost 20 years ago in order to improve the fuel efficiency of their hybrid automobiles. Honda started to fill their new Insight Hybrid at the factory with Idemitsu 0W-20 after extensive testing and refinement. Unique additives were utilized in this lower viscosity, higher quality synthetic oil to improve stability and decrease volatility—the traditional downsides of low-viscosity oil.
Honda soon started putting Idemitsu 0W-20 in non-hybrid vehicles in 2005. As soon as other automakers noticed, all the big Japanese brands swiftly followed suit. Nissan and Toyota both started utilizing it in 2006.
In 2010, Idemitsu introduced 0W-20 to the US. Since that time, it has been the factory-fill oil in countless American-made Honda, Toyota, and Nissan automobiles. Additionally, US automakers are increasingly considering 0W-20 as a feasible option in response to increasing regulatory pressure to improve fuel efficiency.
Therefore, why wouldn’t you choose Idemitsu Lubricants for your vehicle if these reputable manufacturers do?
Which oil is ideal for a 2010 Honda Accord?
4.2 quarts of SAE 5W-20 engine oil are necessary for four-cylinder-equipped 2010 Honda Accord automobiles. 4.5 quarts of SAE 5W-20 oil are needed for models that have a six-cylinder engine.
In my 2010 Honda Accord, what kind of oil should I use?
2010 Honda Accord motor oil requirements are 4.2 to 4.5 quarts of SAE 5W-20. Honda’s producers claim that as long as the oil is changed as needed, both conventional and synthetic oils will function.
2011 and later Accord vehicles need synthetic oil, however your 2010 may use either. Here is a brief explanation of the distinction:
- What type of oil need to I use in my 2010 Honda Accord?
- 4.2 to 4.5 quarts of SAE 5W-20 motor oil are required for the 2010 Honda Accord. As long as the oil is changed as needed, Honda’s manufacturers claim that conventional or synthetic oils will both function.
- While your 2010 Accord can use either, cars built in 2011 and after need synthetic oil. Here is a brief comparison of the differences:
Following a maintenance schedule and utilizing the specified components and fluids are no-brainers when it comes to protecting your car. Allow Jerry to locate the best auto insurance at the lowest cost for you as an additional means of defending your vehicle (and your wallet).
In under a minute, Jerry can provide you competitive quotes. Swapping is as simple. Jerry handles all the paperwork, makes all the contacts, and can even help you terminate your previous policy! Switching users save $887 year on average!
How often should the oil be changed in a Honda Accord?
We advise changing the oil in vehicles utilizing synthetic oil every 7,500 miles or every six months, whichever comes first. Oil changes for traditional oil-powered vehicles should be performed every 3,000 miles or three months, whichever comes first.
Is 0W20 harmful to engines?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
Which is preferable, 5W 30 or 0W-20?
Pay particular attention to the quality testing done while selecting a motor oil. Both the API donut and the starburst sign should be visible on the packaging.
The American Petroleum Institute’s testing was successful, as evidenced by the API donut. The starburst is also used to demonstrate eligibility for SL service.
Location
You must take the region into account while selecting the ideal oil viscosity from the suggested possibilities. For instance, 5W20 can be used in somewhat warmer settings while OW20 will perform better in cold climates like Maine or Alaska.
Having knowledge of the temperature range aids in selecting the proper oil. The temperature range for 0W-20 oil is -40 to 68F. In contrast, the operating temperature range for 5W20 oil is -31F to 68F and for 5W30 oil is -31F to 104F.
Fuel Economy
Because the lubricant flows more easily, the higher the fuel efficiency, the thinner the oil viscosity. As a result, 5W20 will run similarly to 0W20 once the engine has warmed up, but 0W20 will be more fuel-efficient during startup.
In both colder and warmer climates, 0W20 offers greater fuel efficiency than 5W30. However, 5W20 only performs better than 5W30 in hotter environments.
You can give the engine the protection it needs to last longer by using the proper oil in it. Make sure you do your study before selecting oil to attain the performance level you need.