High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart, from Mobil 1 (Part No. 120768)
In This Article...
Honda advises using synthetic motor oil?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
Is 5W 30 safe to use in a 2008 Honda Accord?
2008 Honda Accord engines require 5W-30 motor oil. For this car, you can use conventional, synthetic, or synthetic-blend oil.
You can choose between synthetic and traditional oils as long as your engine is running on 5W-30 engine oil. For the duration of your Accord’s life, you should only use 5W-30 engine oil as long as it is running smoothly and emits no smoke or burning aromas.
Jerry may be trying to lower your auto insurance costs as you work on the maintenance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry completes all paperwork and even assists with canceling your old coverage! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- reduces wear to extend engine protection
- designed specifically for Honda and Acura automobiles
- Excellent pumpability at low temperatures
- Excellent thermal breakdown and viscosity resistance at high temperatures
- prevents the buildup of sludge and varnish
- exceeds ILSAC GF-5 requirements for new car warranties
- Low volatility for less reliance on oil
Does using synthetic oil matter?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- easier to oxidize and acidify
- Less stable chemically
- faster to degrade and lose protective properties
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- safeguarding against extreme temperatures
- minimizing wear
- preventing sludge and deposit accumulation
- preventing oil deterioration
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.
Can I use 5W-30 for 5W20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
In cooler climates, 5w20 performs well. It makes it possible for a car’s engine to start up quicker because it causes less friction when it moves rapidly and smoothly to deeper engine components. The parts are immediately lubricated. Conversely, 5w30 operates effectively in hotter environments. In contrast to 5w20, it does not thin down rapidly when exposed to heat. As a result, at operating temperatures, 5w30 provides improved overall protection for the engine components.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
Is 0W-20 only available in synthetic form?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
Can I substitute 5W-20 for 0W-20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
What kind of oil is used in a 2010 Honda Accord?
2010 Honda Accord motor oil requirements are 4.2 to 4.5 quarts of SAE 5W-20. Honda’s producers claim that as long as the oil is changed as needed, both conventional and synthetic oils will function.
2011 and later Accord vehicles need synthetic oil, however your 2010 may use either. Here is a brief explanation of the distinction:
- Because it runs more slowly than synthetic oils, it can provide older engines with additional protection.
- is more affordable, and
- has to be replaced every 3,000 miles or so.
- from crude oil, refined
- better guards against rust, corrosion, and buildup/sludge
- is synthetic oil created to mimic conventional oil but with fewer contaminants.
- even when it is cold, flows fast and readily through your engine.
- should be replaced every 7,500 to 10,000 miles.
- use a standard oil base
- flows more slowly than fully synthetics yet burns cleaner than normal oil.
- increases the use of synthetic oils to better protect your engine.
Following a maintenance schedule and utilizing the specified components and fluids are no-brainers when it comes to protecting your car. Allow Jerry to locate the best auto insurance at the lowest cost for you as an additional means of defending your vehicle (and your wallet).
In under a minute, Jerry can provide you competitive quotes. Swapping is as simple. Jerry handles all the paperwork, makes all the contacts, and can even help you terminate your previous policy! Switching users save $887 year on average!
What is engine oil 0W-20?
A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.
In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.
Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.