One of the most fundamental and significant preventative maintenance procedures you can have performed on your vehicle is a regular oil change, and the 2016 Honda Civic is no exception. But it’s crucial to make sure you’re using the appropriate kind and amount of oil.
So, what kind of engine oil should you use and how much do you need for a 2016 Civic?
Simply said, the 2016 Civic needs full-synthetic SAE oil with a viscosity of 0W-20. The oil capacity of your car can be between 3.7 and 4.4 quarts, depending on the specific engine.
You can take even better care of your 2016 Honda Civic by being aware of why oil type matters and what to look for when selecting oil.
In This Article...
What kind of oil is used in a Honda Civic?
You need synthetic 0W-20 grade oil for your Honda Civic. The lower viscosity that synthetic oil can achieve is what the Honda engine requires to operate. Both conventional oil and mixed synthetic chemicals are not intended for use in your car.
Tools Needed:
Now you may install the engine oil funnel where your oil cap threads by grabbing it from the package. You can pour oil into the funnel fast because of its wide design without worrying that it may run over the top. Simply place the 1 quart bottles of fresh oil upside down in the funnel and allow the liquid to drain in while you open the next container.
Add the recommended oil amount from the manufacturer. It is 3.7 qts for the 1.5L. It is 4.4 qts for the 2.0L.
Check the dipstick after adding this amount of oil to see whether you are close to the recommended level. When in doubt, it is preferable to add oil gradually and check frequently as opposed to overfilling.
Remove the funnel once the dipstick’s reading is accurate. You can clean it by wiping it with a rag.
Motivx Pro Tip: After turning on your Honda, let it run for a short while to develop oil pressure and fill the oil filter. When the dipstick reaches the full mark, turn off your engine and fill off the oil.
Do I need synthetic oil for my Honda Civic?
- Your engine’s age and condition: Synthetic oil contains uniform molecules, which makes it more likely to pass through engine rings and cylinder walls. You should continue using conventional oil if your engine is already prone to leaks and/or excessive oil usage. Why spend more money on synthetic oil if it would merely leak out more quickly?
- How You Drive Your Civic: Even in stop-and-go traffic, do you frequently idling your Civic? Don’t be natural. It’s because air flow is necessary for your engine to stay cool. Synthetic oil, as opposed to regular oil, might aid in keeping your engine cool while it is idle. If you utilize your Civic for activities other than commuting, like racing, synthetic oil is a wonderful alternative because it provides greater protection.
- Where You Live: Because synthetic oil is considerably more adaptable than conventional oil in extremely cold and thin air, it works best if you live in a hot, cold, or high altitude climate.
- How Frequently You Drive Your Civic: If you don’t drive your Civic very often, synthetic oil will benefit you because traditional oil has a tendency to degrade quickly, even when not being used, whereas synthetic oil will last over time.
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- reduces wear to extend engine protection
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- prevents the buildup of sludge and varnish
- designed specifically for Honda and Acura automobiles
- Excellent pumpability at low temperatures
- exceeds ILSAC GF-5 requirements for new car warranties
- Low volatility for less reliance on oil
- Excellent thermal breakdown and viscosity resistance at high temperatures
Is 0W-20 equivalent to 5W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Which motor oil is recommended for Honda?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
What is engine oil 0W-20?
A winter viscosity multigrade SAE oil, 0W-20, lubricates your engine parts in cooler climates and offers outstanding cold start performance.
In cold climes, 0W-20 oil is very thin and flows very freely without creating any friction. It also runs very smoothly and lubricates crucial engine components at normal operating temperatures.
Additionally, this multigrade oil functions well even when the engine temperature is adjusted to relatively high levels. It may not provide as thick an engine protection barrier as 0W-30 or 5W-40 oil, but it is still regarded as a good option for seasons.
Who manufactures Honda synthetic oil 0w20?
Idemitsu is a pioneer in the development of synthetic oils with lower viscosities, such as 0W-20.
Idemitsu and Honda teamed up to create a lower viscosity oil almost 20 years ago in order to improve the fuel efficiency of their hybrid automobiles. Honda started to fill their new Insight Hybrid at the factory with Idemitsu 0W-20 after extensive testing and refinement. Unique additives were utilized in this lower viscosity, higher quality synthetic oil to improve stability and decrease volatility—the traditional downsides of low-viscosity oil.
Honda soon started putting Idemitsu 0W-20 in non-hybrid vehicles in 2005. As soon as other automakers noticed, all the big Japanese brands swiftly followed suit. Nissan and Toyota both started utilizing it in 2006.
In 2010, Idemitsu introduced 0W-20 to the US. Since that time, it has been the factory-fill oil in countless American-made Honda, Toyota, and Nissan automobiles. Additionally, US automakers are increasingly considering 0W-20 as a feasible option in response to increasing regulatory pressure to improve fuel efficiency.
Therefore, why wouldn’t you choose Idemitsu Lubricants for your vehicle if these reputable manufacturers do?
How often should an oil change be performed on a 2016 Honda Civic?
The frequency of oil changes is specified in the owner’s manual of your Honda vehicle, regardless of model. A 2016 Honda Civic, for instance, needs its oil changed after 7,500 miles. No of the mileage, change the oil at least twice a year.
Can regular oil be used in a 2016 Honda Civic?
– Honda only offers fully synthetic oil for their vehicles in Canada.
I advise using fully synthetic oil with any automobile (especially since the price difference is negligible), and of course, according to the engine’s specifications.
How can the oil life on a 2016 Honda Civic be reset?
This issue occurs quite frequently! Fortunately, you can restore your oil life very quickly. For your 2016 Honda Civic, follow these instructions:
- Put your finger on the instrument panel’s TRIP knob.
- Press and hold the knob for 10 seconds or until the display begins to blink after the engine oil life indicator appears in the display.
- Press and hold the TRIP knob for five more seconds, or until the engine oil life indicator reaches 100%, and then release it.
The issue should be resolved by resetting the oil life as you’ve already had an oil change. But it would be wise to take your automobile to the repair if you smell burning or hear odd noises coming from your engine or see any smoke. These are all indications that your engine may be leaking oil, which, if not rectified, might seriously harm it.
Continue to secure your automobile with the Jerry app as you take good care of it. To make sure you always get the best price on the coverage you require, Jerry compiles personalized auto insurance quotes from more than 50 leading providers. Every year, the typical Jerry user saves $879!
Is a synthetic blend or full synthetic product preferable?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- faster to degrade and lose protective properties
- Less stable chemically
- easier to oxidize and acidify
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing oil deterioration
- preventing sludge and deposit accumulation
- minimizing wear
- safeguarding against extreme temperatures
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.