Advanced Full Synthetic Motor Oil, 5 Quart, Mobil 1 (Part No. 14991)
In This Article...
Is 0W-20 equivalent to 5W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Honda advises using 100% synthetic motor oil?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
What occurs if I use 5w30 as opposed to 5w20?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.
Using the proper oil keeps your engine operating at its best.
use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
Is it acceptable to substitute 5w30 for 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
What happens if I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
What happens if I substitute 0W-20 for 5W-20?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
Is 0W20 harmful to engines?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
How frequently should the oil be changed in a Honda Odyssey?
Any engine needs healthy motor oil to operate at peak efficiency. Oil changes for your Honda Odyssey should only be required every 7,500 miles or so. You can also inquire about if your tires need to be rotated with the service professional at this visit.
A 2012 Honda Odyssey can hold how many quarts?
The engine oil capacity of the 2012 Honda Odyssey is 4.5 quarts. However, there are still other things to consider before completing an oil change at home.
Oil changes are no exception to the rule that routine engine maintenance may be annoying. The oil pressure lamp on the dashboard typically signals a visit to the mechanic, but you don’t need to be a grease monkey to replace your own oil. Actually, performing oil changes at home is extremely simple (and inexpensive).
Automatic Transmission Oil Capacity
Depending on the automatic gearbox, the 2021 Honda Odyssey can hold 8.8 or 9 quarts (8.33 or 8.52 liters) of automatic transmission oil.
When should synthetic oil not be used?
For Older Engines, Better Despite this, it is still not advised to use synthetic oil in engines that have undergone considerable changes, particularly those with odometer readings of approximately 75,000 miles.
Honda’s 0W-20 oil is it synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- API Service SN that Saves Resources
- GF-5 ILSAC
- reduces wear to extend engine protection
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- Excellent thermal breakdown and viscosity resistance at high temperatures
- designed specifically for Honda and Acura automobiles
- Excellent pumpability at low temperatures
- prevents the buildup of sludge and varnish
- exceeds ILSAC GF-5 requirements for new car warranties
- Low volatility for less reliance on oil