The same kind of fuel is required by both of the Accord’s various engine configurations for this model year. That oil is completely synthetic SAE 0w-20. Consult the owner’s manual for the 2019 Honda Accord for more detailed information. You should check there to find all the information you require about your car.
Open the hood of your car if you still need some assurance. The oil type is frequently printed directly on the motor oil cap next to your engine. That may provide you some extra information.
In This Article...
Hondas require synthetic oil, right?
Can I run my Honda engine on synthetic oil? Motor oils made of petroleum are used to lubricate Honda engines throughout development, testing, and certification. Synthetic oils are permitted, but any motor oil used in our engines must adhere to the owner’s manual’s oil specifications.
Is 0W-20 oil for Honda synthetic?
For the best possible engine protection in Honda and Acura cars, Honda Genuine Synthetic Blend Motor Oils are premium quality, all-season synthetic blend engine oils. They transcend the standards set by Honda and Acura to further prevent damaging engine deposits and increase fuel efficiency. Honda R&D tests and certifies its motor oils.
Honda Genuine Synthetic Blend Motor Oil is designed to withstand viscosity and thermal breakdown even under extreme service conditions, to offer exceptional wear protection, and to reduce the production of sludge and varnish. It also has strong foam resistance and safeguards against rust and bearing corrosion. In comparison to conventional engine oils, the part-synthetic formulation offers improved oxidation resistance, thermal stability at high temperatures, and better pumpability at low temperatures, providing additional protection under all driving circumstances.
The performance standards for gasoline engines set out by API SN and ILSAC GF-5 are exceeded by Honda Genuine Synthetic Blend Motor Oil. It is “Resource Conserving for better fuel efficiency and protection of catalysts in emissions control systems.
except for the RDX, Honda and Acura cars
Honda Genuine Synthetic Blend Motor Oil goes above and beyond:
- GF-5 ILSAC
- API Service SN that Saves Resources
- designed specifically for Honda and Acura automobiles
- exceeds ILSAC GF-5 requirements for new car warranties
- reduces wear to extend engine protection
- Low volatility for less reliance on oil
- Excellent pumpability at low temperatures
- Resource conservation to safeguard emissions systems and improve fuel efficiency
- prevents the buildup of sludge and varnish
- Excellent thermal breakdown and viscosity resistance at high temperatures
What kind of oil is recommended for a 2008 Honda Accord?
2008 Honda Accord engines require 5W-30 motor oil. For this car, you can use conventional, synthetic, or synthetic-blend oil.
You can choose between synthetic and traditional oils as long as your engine is running on 5W-30 engine oil. For the duration of your Accord’s life, you should only use 5W-30 engine oil as long as it is running smoothly and emits no smoke or burning aromas.
Jerry may be trying to lower your auto insurance costs as you work on the maintenance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry completes all paperwork and even assists with canceling your old coverage! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
How long does Honda Accord synthetic oil last?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Honda advises changing your 2020 Honda Accord’s oil and filter every 3,000 to 5,000 miles. One of the most essential and required procedures for your car is an oil change.
How often should the oil be changed in a Honda Accord?
We advise changing the oil in vehicles utilizing synthetic oil every 7,500 miles or every six months, whichever comes first. Oil changes for traditional oil-powered vehicles should be performed every 3,000 miles or three months, whichever comes first.
Which motor oil is recommended for Honda?
Honda Genuine Motor Oil is made especially for your car because it satisfies American Honda’s strict engineering requirements. These requirements are on par with or better than many traditional fluids’ normal industry performance specifications. Honda Genuine Motor Oil, tried and true by American Honda’s Research & Development team, aids in keeping your Honda in line with its factory specifications.
Honda Genuine Motor Oil, offered and accessible at Honda dealers, is advised by American Honda. If conventional motor oil of a premium grade or an ultimate full synthetic mix is used instead of Honda Genuine Motor Oil, it must have the necessary viscosity grade listed in your Owner’s Manual. Additionally, the oil must be marked with an API Certification Seal, which certifies that it complies with the most recent API requirements and that it is energy-efficient. Oil additives are not necessary and are not advised; using them could have a negative impact on the durability and performance of your car’s engine.
For a list of fluids recommended by the manufacturer, please refer to your owner’s manual’s Recommended Engine Oil.
Which is preferable, w20 or w20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Is complete synthetic oil more durable?
Better at Higher Temperatures: Because synthetic oil doesn’t thicken as much in high temperatures, it lasts longer than regular oil.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
Is 0W-20 only available in synthetic form?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
Can I substitute 5W-20 for 0W-20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Can I use 5w30 for 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.