Advanced Full Synthetic 0W-20 Motor Oil, 5 Quart, Valvoline (Part No. 881150)
In This Article...
When should my 2016 Honda Accord’s oil be changed?
One of the most important and crucial procedures for your car is an oil change. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Honda advises having your 2016 Honda Accord’s oil and filter replaced every 3,000 to 5,000 miles.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
How often should the oil be changed in a Honda Accord?
We advise changing the oil in vehicles utilizing synthetic oil every 7,500 miles or every six months, whichever comes first. Oil changes for traditional oil-powered vehicles should be performed every 3,000 miles or three months, whichever comes first.
Can I substitute 0W-20 oil for 5w20 oil?
My car is intended to use 5W-20 motor oil, a reader writes. I unknowingly purchased 0W-20 and changed my oil without realizing it. Is it okay to keep using the 0W-20?
Our response: 0W-20 is typically a completely suitable replacement for 5W-20. Both goods are 20-weight motor oils when used in normal conditions. However, if the car is still covered by warranty, employing 0W-20 might not be appropriate in your situation (see more below).
0W 20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
How far can I travel with no oil life?
In general, cars may travel 5,000 to 7,500 miles without having an oil change. Additionally, you can go 10,000 or even 15,000 miles between oil changes if your car uses synthetic oil.
Is Honda engine oil required?
Do you have to use fluids from the Honda brand? Yes is the clear-cut response. Corrosion is the key, and Honda fluids are the best fluid to reduce corrosion and keep your Honda dependable.
Do Hondas require fully synthetic fuel?
According to Mel Yu, a car analyst for Consumer Reports, Honda is not alone. About 70% of new automobiles for the 2019 model year come with 100% synthetic or mixed oil.
Although some companies, like Honda, don’t specifically ask for synthetics in their engines, Yu notes that the low-viscosity lubricants those engines need are only available in synthetic form. Some companies employ “synthetic mix oil,” which combines synthetic and conventional oils. Blends are far less expensive but don’t offer all the advantages of synthetics, he continues.
Additionally, a lot of places that replace oil also sell synthetic oil as a substitute for regular engine oil.
The 2018 National Oil and Lube News annual study, according to Will Hixson, spokesman for the Automotive Oil Change Association, reveals that more than half of car owners select synthetics or synthetic mixes when they get their oil changed.
Does using synthetic oil make sense? The decision to is a good one, but only if your car has particular requirements.
Synthetic motor oil has some benefits over regular motor oil. They are intended to be more successful at:
preventing oil deterioration, allowing it to last longer than regular oil
Who manufactures Honda synthetic oil 0W20?
Idemitsu is a pioneer in the development of synthetic oils with lower viscosities, such as 0W-20.
Idemitsu and Honda teamed up to create a lower viscosity oil almost 20 years ago in order to improve the fuel efficiency of their hybrid automobiles. Honda started to fill their new Insight Hybrid at the factory with Idemitsu 0W-20 after extensive testing and refinement. Unique additives were utilized in this lower viscosity, higher quality synthetic oil to improve stability and decrease volatility—the traditional downsides of low-viscosity oil.
Honda soon started putting Idemitsu 0W-20 in non-hybrid vehicles in 2005. As soon as other automakers noticed, all the big Japanese brands swiftly followed suit. Nissan and Toyota both started utilizing it in 2006.
In 2010, Idemitsu introduced 0W-20 to the US. Since that time, it has been the factory-fill oil in countless American-made Honda, Toyota, and Nissan automobiles. Additionally, US automakers are increasingly considering 0W-20 as a feasible option in response to increasing regulatory pressure to improve fuel efficiency.
Therefore, why wouldn’t you choose Idemitsu Lubricants for your vehicle if these reputable manufacturers do?
Is 0W 20 equivalent to 5W 20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
What happens if I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Is 0W20 harmful to engines?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.